holley projection
 

anybody here ever put a projection on a rotary, i was thinking it might work out ok, any ideas or anything better to use for a 79 with a 4 port 13-b

You can always go with a Sterling Nikki if you're really looking for a good, race-proven rotary carb:
http://www.sterlingmetalworks.com/th...ling_nikki.htm

Valued at over $400 is currently available at $285 IN THIS THREAD

If you are interested then not only will you get a good deal on the carb but you'll be helping RCC with give-aways at 7stock and open the possibility of a LIVE webcast for those that can't make it to 7stock this year!

Good luck with the carb search.

I'm sure a Pro-Jection would work quite well. Tweakit.net has some tapered-bore IDA-style throttle bodies that I've been drooling over, too.

If you want to use a Sterling as Phoenix7 suggests, you'll have to re-drill a stock 4-port 13B intake manifold for the Nikki bolt pattern. As far as other carb suggestions, I'm a fan of Weber carbs and their clones.

i currently have a 4DI setup i'm planning on using on a RB holley intake. had it for quite some time just haven't taken the time to start the install. it being a DD it's hard to do things like this and chance having it down for any length of time. but it'll get there.

i sents two people to sterling....o god my friends are so mad at me. he carbnap. it took a long time to get thair carbs back

The only problem I hear with the projection is the tune-ability. Also it is on the big side. Personally the Tweakit.net would probably work better for you. Also atkins makes an injection kit. http://atkinsrotary.com/store/catalo...t-p-16951.html

I have a holley pro-jection tuned by RB. and was pulled of a running 13b... The best part about them is they come with everything. ITB's or any other TB need a lot of things to go with it. stand alone, injectors, rails, pump, ect. ect. ect.

Tuning is very easy.

Sen2two, what size TB does the projection come with?

What?

^:ack2:i am trying to lay off the booze........