Rotary Car Club

Rotary Car Club (https://rotarycarclub.com/index.php)
-   RX-7 3rd Gen Specific (1993-2002) (https://rotarycarclub.com/forumdisplay.php?f=36)
-   -   Will these fit FD with Coilovers? (https://rotarycarclub.com/showthread.php?t=8802)

Proxy One 08-13-2009 11:22 AM

Will these fit FD with Coilovers?
 
Im looking at a set of wheels for the FD and wondered about the offsets on these. Do you think they would fit? I have coilovers too so rubbing might be a bit less of an issue.

FRONTS are 18 x 8 +40 offset
REARS are 18 x 9.5 +38 offset

Herblenny 08-13-2009 11:39 AM

Should work.

jkstill 08-14-2009 10:57 AM

Quote:

Originally Posted by Proxy One (Post 94110)
Im looking at a set of wheels for the FD and wondered about the offsets on these. Do you think they would fit? I have coilovers too so rubbing might be a bit less of an issue.

FRONTS are 18 x 8 +40 offset
REARS are 18 x 9.5 +38 offset

I have 18x9.5 +38 front and rear with GC coilovers (2.5" springs)

No issues there with 285/30/18 tires. The fenders needed to be rolled, but no problems inboard.

David Jerome 08-14-2009 03:23 PM

They will fit fine with a 275 or smaller in the rear.

Proxy One 08-17-2009 02:16 PM

Yeah thats what I was thinking, ill probably run a 275 anyhow.

Herblenny 08-18-2009 01:40 PM

jer,

I ran 10.5 +43 on stock rear... with 275/35s, 285/30s and even 305 (or was it 315)/30s. So you are ok

Front, I was able to fit 18x8 +30.. which were those forgelines.. But it rubbed when full turned with 245/40s. +40 might be ok.. but watch out for tall tires. I put 18x9s +50 with 255/30 or 35 18s in front and didn't have issues... or not as much as the 245/40s


All times are GMT -5. The time now is 10:12 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Hosted by www.GotPlacement.com