Rotary Car Club

Rotary Car Club (https://rotarycarclub.com/index.php)
-   RX-7 2nd Gen Specific (1986-92) (https://rotarycarclub.com/forumdisplay.php?f=37)
-   -   issues need help (https://rotarycarclub.com/showthread.php?t=8099)

FCTII 05-23-2009 10:02 PM

issues need help
 
so my blow off valve was pretty much worn out it was a knock off hks and it caused a boost leak. i just recently replaced it and now it runs like a champ but the car wont idle. when i unplug the vac hose it idles just fine. if anyone could help me out that would be great.

TehMonkay 05-23-2009 11:09 PM

idle air mixture might be set too rich, check the fsm, if not that try to adjust the idle speed.

FCTII 05-26-2009 08:52 PM

i tried everything is there anyone around wausau WI that could help me out check it out i'll throw you some money???

Mazdaracer4fun 06-04-2009 12:11 AM

take a video of your problems and what you do to keep it running. that will help a lil bit...also make sure the car is at normal operating temperature (fully warmed up) b4 taking video... my rx7 idles funny till its all warmed up ... after that its a dream! lol

FCTII 06-06-2009 12:07 PM

in order to keep it running i need to hold my foot on the gas even when its warmed up. but it has a real jumpy idle whe the blow off valve it un plugged otherwise it wont idle when its plugged in. i'll take some video tho

TehMonkay 06-07-2009 03:25 PM

Try and bump up the idle with the screw on the bac valve, i would turn it all the way in first then slowly back it out until it stays running.

FCTII 06-07-2009 05:52 PM

Quote:

Originally Posted by TehMonkay (Post 88830)
Try and bump up the idle with the screw on the bac valve, i would turn it all the way in first then slowly back it out until it stays running.

there is no bac valve it was removed before i bought it.


All times are GMT -5. The time now is 05:47 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Hosted by www.GotPlacement.com