need some help
 

i bought my 1st rx-7 the other day.he said everything was there to put it back together.and its not:banghead: .i have got all motor pecies that was in the car put back on.and im still missing some.and i have no idea what.
and if you guys happen to have these parts just sitting around for cheap i will buy them.

so i took some pics and was wondering if you could help me.
its a 1988 mazda rx-7 s4 se with the 13b non turbo

http://i102.photobucket.com/albums/m...5/DSCN3977.jpg
something goes there.to the silver pipe to the black hose.

http://i102.photobucket.com/albums/m...5/DSCN3972.jpg
what goes here?intake?
http://i102.photobucket.com/albums/m...5/DSCN3971.jpg
the thing on top..idk what that is

Well the thing on top is for a cap and that is where you add water and all that...

The second pic is def the intake and looks like you need an air box and filter. The black hose is for the air pump and that needs to be connected to the air box as well...

And as for the first pic... i am a 3rd gen dude soooo might need more help on that one.

THe first pic is for a little electric solenoid. Give me a sec and I'll look it up in the FSM for you.
http://www.rotorwiki.com/images/e/e2...missionsNA.pdf
Page 3
That is the location for the Air By Pass Solenoid.

thank you!

where can i get that hose thing.im missing the adapter thing.and the correct name so i can order one.

hey, I have an S5 airbox sitting around, would it fit his car?

he needs an s4 airbox or a cone filter and adapter, most advances and autozones have them

the first picture is where the aws solenoid would go, you do not want that on your car, it's useless, makes you car rev to 3k on startup

Cap the nipple on the manifold, and run a rubber hose from the metal one directly to the fitting on the bac valve.

Also make sure the hose is connected to the intake boot on the other side of the metal pipe.

i just ordered a intake. and new fuel pump
it was just the cheap ebay intake but i ordered a injen filter.went to autozone an got a adapter.just put ngk wires and plugs in the car.changed the oil.the oil in it was pretty clean already.

Well it sounds like you are making good progress with this.. gl man. Hope that it goes well. Need anything else post it up!

i will.thanks.
i just now looked under my car for the 1st time and nseen that there is no exhaust from the headers down to the Y pipe....anyone got a stock one laying around?

I do, but they're gutted.

it dont matter.how cheap would you let it go for.
i just need the middle peice.to bolt on to the back of the headers and to the Y pipe.

You have a PM.

is it a header or a stock manifold?

stock.the whole car is stock.

for now