My first finished port
 

http://farm4.static.flickr.com/3127/...215943c9_b.jpg


Its not the best portjob in the world... but Im not George Clooney and still works :D


http://farm3.static.flickr.com/2400/...aa2ab8dd_b.jpg

I know...

I could sand a lot more... but Im tired today...

http://farm4.static.flickr.com/3048/...2741852c_b.jpg
Stock vs. Street Port

http://farm3.static.flickr.com/2307/...ea5b05f3_b.jpg

http://farm3.static.flickr.com/2411/...19cf3804_b.jpg

Not bad :icon_tup:

At least it looks like you went with a used housing first to try your hand - smart move!

It looks pretty good, has enough bevel so the seal wont snag. All you need now is some finer sanding and some polish!

yeah... I have to find those flapped things for the dremel.

I seriously dont feel like sanding by hand anymore...

Don't use a dremel, use a die grinder (electric will work) with a flap sander on it. It has a lot more torque so it will smooth it out a crapload faster. Use the dremel for the finishing touches.

Good port work also.