A fun project I'm sure many will enjoy.
 

The past few months I've been wrenching on an old Yamaha G1A I got from someone at work. The idea was to put a rotary in it and just have fun with it. This seed was planted from when the guys and I at RotaryRecycle were building the go-kart project. I had an idea at that time to use a golf cart differential or something similar but we were short on time for DGRR so the end result was simply a drive belt and pulley set-up which unfortunately ruined the practicality of having a go-kart (ask DJ :rofl: ). The thing would go really freaking fast once moving though!

After collecting dust under my house for years (and while in the middle of moving) I found motivation to do something new with the KM24. Here is the bitchin sweet '79 G1 the day I brought her home. .

https://c2.staticflickr.com/6/5493/3...5f01cf63_c.jpg

The tires/wheels were in very rough shape (the rear especially), I needed to get new tires first thing before doing anything else so I could easily roll the thing around without having to air the tires each time. I was not aware how expensive these stupid tires were till I needed some, I just assumed an 8" golf cart tire with wheel would have been ~$40-50. . . I was sadly mistaken, the tires alone were $60 (each!) at Wal-Mart! Anyways, I found a much better deal on eBay for a wheel/tire combo and 10" DOTs to top it off. I definitely put lipstick on a pig :)

https://c1.staticflickr.com/6/5517/3...2860e7b2_c.jpg

After mocking things up I found I needed a different intake manifold, one with a bend or else I'd have to move the engine further forward than I'd like. Once I got that, the fun could begin

https://c8.staticflickr.com/6/5483/3...b02710af_c.jpg

https://c8.staticflickr.com/6/5482/3...570b494c_c.jpg

https://c4.staticflickr.com/6/5469/3...078dc924_c.jpg

https://c6.staticflickr.com/6/5769/3...1bdd0f5e_c.jpg

https://c5.staticflickr.com/6/5632/3...59d7c3a7_c.jpg

https://c1.staticflickr.com/6/5590/3...8536a6a8_c.jpg

I swapped the original carb out with another Tillotson, one with a built in fuel pump, rebuilt it too.

https://c7.staticflickr.com/6/5752/3...781a0b59_c.jpg

https://c7.staticflickr.com/1/403/31...7a3c7d4e_c.jpg

https://c5.staticflickr.com/1/768/31...778e3bc8_c.jpg

Since this was originally a two-stroke model (different components to spin engine opposite direction for reverse), most of the electronics/wiring weren't compatible with my application and to top it off the wiring was too complex for me to figure out how to retain something as simple as a solenoid so I stripped it all out. Keeping it stupid simple, I used trailer wire as a harness (the ends have connectors!) and a universal solenoid and ignition switch.

https://c6.staticflickr.com/6/5597/3...fa9a9d40_c.jpg

https://c8.staticflickr.com/6/5547/3...736b8776_c.jpg

https://c5.staticflickr.com/6/5566/3...4881da4e_c.jpg

After removing the overcomplicated TEN wire ignition switch that was much larger than the simple universal piece I installed, I needed something to attach it. I made a plate using a sticker a friend made for a template. I thought this was a nice touch :)

https://c6.staticflickr.com/6/5553/3...7090e011_c.jpg

https://c8.staticflickr.com/6/5564/3...7164008c_c.jpg

Getting close. . Ordered a K&N and a drive belt. . the first belt I ordered was pretty darn close! just a little too small. I ordered two larger sizes

https://c1.staticflickr.com/1/372/31...fe15fa27_c.jpg

https://c2.staticflickr.com/6/5553/3...2eb9a23a_c.jpg

I got her running, now to get an exhaust made, adjust the carb, and hope one of the two belts I ordered works better than the current. . Anyways, hope y'all get a kick out of this, it sure has been fun so far! Here's a BookFace video, not sure if everyone can see it? ? If not I'll try something else.

https://www.facebook.com/zach.moore....3137861041023/

Mid TN always keeping it weird.

Haha that's awesome.

Thank you sir

Same size wheels as a mini. Will it do wheelies when its done?

I think when its done you need to take in on the golf course and see what kind of reactions
you get. No muffler!

Wait until you see people getting ready for a swing and shoot fireballs :rofl:

Ha Ha, I doubt it but if it did that would be kewl :auto:

I'm no golfer but even if I wanted to troll anyone, I don't think I'd even make it off the trailer without being confronted. . It's ReAlY LOUD! !

:diaf:

What? Whenever I drive past a golf course in my FC I go WOT open WG :rofl:

That Looking Awesome... Great Job! Drive it on golf course and get amazing reactions

Thank you!

I have a new belt from our last project. I will check on what part # it is when i get home.

I called Jess about that belt wondering if he had it. . . It's probably close because the one on the cart right now (LM717) is the same one we had on the go-kart. Nevertheless, the two other belts I ordered arrived yesterday. Curious what you have though. Hell, I'm the one that ordered those but I've slept since then.

Here's the belts I made a note of. Belt '717 ordered first and as soon as I get the cart back from the guys down the street, I'll try '1039 and '1116. Let me know what you got.

https://c5.staticflickr.com/6/5581/3...cc25c923_c.jpg

That's a 41 3/8" OD belt, way too small for my app. Thank you though.