Rotary Car Club

Rotary Car Club (https://rotarycarclub.com/index.php)
-   Carburetors and Carb Tuning.. (https://rotarycarclub.com/forumdisplay.php?f=95)
-   -   51ida going alchohol... (https://rotarycarclub.com/showthread.php?t=13734)

sen2two 03-24-2011 11:27 AM

51ida going alchohol...
 
I have a set of 51ida Webers on my streetported 12a right now. I'm running regular 93 octane fuel in it. But very soon I will be doing an all motor peripheral 12a and switching to an alchohol based fuel. As far as I know, nothing really has to be done to the Webers themselfs when switching to alchohol or E85 besides fuel pump/lines/filter. True of false? Which is all getting swapped out anyway to handle the PP.

My question is really about running the 1st gen dizzy and where to get started on timing. Just advance it until it idles smooth and tune it from there? Don't really have a clue here...

Thanks in advance.

rx71king 03-24-2011 05:00 PM

i would start off 20L 10T....e85 and alcohol will corroded your carb if lift in it.you need to run pump gas in to it when finish running at the track....http://www.racingbeat.com/manuals/timingchart.pdf.

730RWHP12A 10-17-2011 08:27 AM

Quote:

Originally Posted by sen2two (Post 144665)
I have a set of 51ida Webers on my streetported 12a right now. I'm running regular 93 octane fuel in it. But very soon I will be doing an all motor peripheral 12a and switching to an alchohol based fuel. As far as I know, nothing really has to be done to the Webers themselfs when switching to alchohol or E85 besides fuel pump/lines/filter. True of false? Which is all getting swapped out anyway to handle the PP.

My question is really about running the 1st gen dizzy and where to get started on timing. Just advance it until it idles smooth and tune it from there? Don't really have a clue here...

Thanks in advance.



nevermind the timing, what about fuel??!!
when you switch from gas to alcohol you burn double the fuel, so lets say your running a 240 main fuel jet on your p-port on gas. you switch to alcohol, you now need at least a 400 main jet(on the small side). the carb you have with the main jets removed wont flow more than 280..

sen2two 10-21-2011 07:31 PM

So basically there's now way I should run a 51 with alchohol? Or are there mods I can do to get it right?

730RWHP12A 10-22-2011 03:52 PM

cant be done

diabolical1 10-24-2011 01:50 PM

without knowing anything else, unless you can drill your jets out to double what you have, then ... refer to what Robert said.

diabolical1 10-24-2011 01:54 PM

by the way ... what's up Robert????

Supernaut 10-24-2011 02:21 PM

Quote:

Originally Posted by 730RWHP12A (Post 169038)
cant be done

I just wanted to comment about your name. Are you going to keep changing it as you make more power?

TheDriver216 10-24-2011 07:05 PM

Quote:

Originally Posted by Supernaut (Post 169194)
I just wanted to comment about your name. Are you going to keep changing it as you make more power?

well it was 680 on the evil forum.. so i guess he found a few more ponies lol

730RWHP12A 10-26-2011 01:43 PM

Quote:

Originally Posted by Supernaut (Post 169194)
I just wanted to comment about your name. Are you going to keep changing it as you make more power?

sure am :) the new name is gonna be big :)

sen2two 10-28-2011 07:26 AM

Thanks for the help. I guess ill Stay with c16 until I go fuel injection. My slide throttle body prototype is almost done...

730RWHP12A 10-28-2011 08:48 PM

if your going to be all motor c16 is the worst choice. its real high octane with a low specific gravity so it burns real slow. good for a turbo car but horrible for a n/a application. you can always make more power with low octane fast burning fuel. with lots of timing and 112 octane you will make the most power.


All times are GMT -5. The time now is 11:41 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Hosted by www.GotPlacement.com