GB: Full Function Engineering Crank Trigger Kits - S4, S5, and RE 13B's
 

It's finally here!

A well engineered, high quality, high resolution crank pickup for the S4, S5, and RE 13B Engines is now available to the public. (FD kits are nearly complete also) This kit allows those with high performance ECU's to run multi-tooth Motronic style wheels which offer greater resolution/sensitivity with zero rpm drift. The days of running a sloppy OEM CAS that has to be "stabbed" or an ultra low resolution two magnet Hall-effect setup are over. These kits are essentially bolt-on and go.

The 36 tooth wheel (renesis & 36-2) offers 3x greater resolution than a stock FC pickup (CAS) and 18x better than a two magnet Hall-Effect setup.
With competent tuning these features combine for the smoothest / safest / most stable rotary engine you've ever driven.

We currently have an ECU compatibility list that is expanding as we're able to test more ecu's, so stay tuned for your ECU to be next!

http://i15.photobucket.com/albums/a3...tionEng024.jpg

http://i15.photobucket.com/albums/a3...tionEng008.jpg

http://i15.photobucket.com/albums/a3...tionEng006.jpg

http://i15.photobucket.com/albums/a3...n/forumCAS.jpg

Details
6061-T6 Construction
Protective Anodizing
18-8 Stainless hardware
OEM Quality Crank Angle Sensor
Crank Angle Connector Kit
Original CAS O-Ringed Cover
Colors
Full Function Blue & Satin Black
Blood Red & Satin Black (coming soon)

Options
Renesis Wheel
2 Foot Shielded Wire Extension & Connectors
coming soon:
Hall Effect Sensor
60-2 Wheel
36-2 Wheel


Additional Information
For use with OEM crank pulley
Not compatible with Power Steering & Air Conditioning
Works on 1, 2, and 3 rotor engines

ECU Compatibility
Haltech
Platinum Sport 1000
Platinum Sport 2000 *(2 rotor only)
Sprint RE

Motec
M400
M600
M800
M84
M2R
M4*(No split timing)

AEM
30-1800

Electromotive
Tec 1
Tec 2
Tec 3/3R

Megasquirt

The retail on this kit is VERY reasonable @ $250 but we are offering an introductory group buy for Rotary Car Club members.
Group buy is as follows:
2-5 kits = $220 (~18% savings)
6-10 kits = $205 (~23% savings)
11+ kits = $190 (~29% savings)

*prices include shipping to the lower 48 states!* (Those out of country please ask for a shipping quote)

Payment forms accepted:
Paypal
Money Order
Cashiers Check

The group buy applies to other forums as well and all will be counted in the number of kits to bring pricing down for everyone.

If you have any technical questions/comments/concerns please direct to either:
FullFunctionEng@gmail.com or private messages.

Thanks!
Full Function Engineering


The FD kits are nearly complete and will be posted soon.

Note to All:PLEASE READ ENTIRELY

The Group Buy is ending Saturday April 16th.
This gives everyone 3 weeks to figure out exactly what they need, get money together,etc.

These parts are already finished so will ship immediately following group buy end date and final payment.

We would like a $50 minimum deposit via Paypal (snyper10x@msn.com) or Check/Money Order (pm/email for our address).

Along with deposit please include:
Full Name
Club Username
Full Shipping Address
Email or Phone #
Amount of deposit
Exact engine setup (i.e., engine model, main pulley, ECU)
Kit requested (FC/FD etc, color combination)
Options (i.e., Hall sensor, wheel tooth pattern, extra connector)

We are also offering a 5% additional discount to those who choose to pay via Check/Money Order!!!

Thank you
Full Function Engineering

Side Note
If you NEED/WANT your kit sooner than April you may pay at the current discounted rate (dependent on GB list length) and we will ship it immediately.

List

1. TitaniumTT (RCC)
2. FrankV702 (RX7CLUB) - deposit paid
3. IAN (RX7CLUB/RCC) - deposit paid

Only need 1 more to reach next pricing level!

1. TitaniumTT (RCC)
2. FrankV702 (RX7CLUB) deposit paid
3. IAN (RCC/RX7CLUB) deposit paid
4. 13Brenova (RX7CLUB) paid in full
5. SirCygnus (RX7CLUB)

For your viewing pleasure!

http://www.youtube.com/watch?v=E3jyFenRsDA

Updated List:

1. TitaniumTT (RCC)
2. FrankV702 (RX7CLUB) deposit paid
3. IAN (RCC/RX7CLUB) deposit paid
4. 13Brenova (RX7CLUB) paid in full
5. SirCygnus (RX7CLUB) paid in full
6. dylyxcore (RX7CLUB) deposit paid
7. jsnow82 (RX7CLUB)
8. beefcake (RX7CLUB)
9. just startn (RX7CLUB)


Only need 2 more to final pricing level, come on guys!!

Only a few days left guys!
Only 1 more to get to final pricing level!

Updated List:

1. TitaniumTT (RCC)
2. FrankV702 (RX7CLUB) deposit paid
3. IAN (RCC/RX7CLUB) deposit paid
4. 13Brenova (RX7CLUB) paid in full
5. SirCygnus (RX7CLUB) paid in full
6. dylyxcore (RX7CLUB) deposit paid
7. jsnow82 (RX7CLUB)
8. beefcake (RX7CLUB)
9. just startn (RX7CLUB)
10. 2Fierce (RX7CLUB)

It's too bad Microtech won't pull through by your due date, I would've been down for a kit for sure at Group Buy pricing. They are officially useless. Maybe next time!

We now have Microtech support! One of our customers just got the details, will be around $150 AUS to do the updated config for rx8 trigger wheel.

Gilmer pulley compatible now...

http://i15.photobucket.com/albums/a3...gilmerred2.jpg

Anything for a 12A setup?

thewird

Yup. The FC kit is backwards compatible. :)