crank angle
 

series 5 13b turbo

what after market computers allow the crank angle sensor to be used?

can i simply use the old mazda 13b turbo computer in my rx4 coupe?

i want to keep the crank angle sensor

thanks !

im off to beat some horses !
:beatdeadhorse5: :beatdeadhorse5: :beatdeadhorse5:

Check out the aftermarket ECU or tuning forums here. I can tell you that the Haltech, Microtech, MoTec (if you are crazy rich) and Megasquirt will all use the factory CAS.

It is a 24 + 2 (home) sensor.

Depending on how crazy you want to go with the engine, you could use the stock ECU to control the entire engine. If you're doing a transplant though I would give some serious thought to building a new harness with some bulkjead connectors. This way if you have plans to upgrade the ecu later in life all you need to do is build a strait harness from the ECU to the firewall.

What TTT means is Bulkhead connectors, or cannon plugs.