fd coilovers
 

hi guys,
the last days i am trying to read the thread from the beggining so to understand what is going on with coilovers for the fd.
i want to follow Howards advise and instal coilovers with 8/6 or 10/8 springs.
for my research and my badget i ended at the below options:

1)tein ss
2)tein flex
3)apexi N1
4)hks hipermax III

But my main concern is the softer springs that I want. probably i will have to change springs in any of the above options.
I want 8/6 or10/8 rates max.as you know the market , can you please recommend one considering how difficult is to find springs at this rate?

i heard some " swift" springs. since i do not know anything about brands could you please help me?can i fit these softer springs to an APEXI or HKS maybe?
or maybe suggest another brand for springs?
is it advisable or it is best to use only same brand springs?


if i change the apexi springs , considering their good price , i will end to have same price with the tein flex. will this setup( apexi) be better than the tein flex?(is monotube better noticibly for a street car?maybe monotube works with hard spring only?)
are n1 better or worst than the flex?

the hks option is maybe out already since it is too expensive and i heard some complaints in the forum for some noises.

from what i have searched already i get more confused . iam not a pro and i respect yours opinion.there are so many variables that someone must consider that i think an opinion from a profesional is valuable.
so could anyone advise me?
the car is not a race car but i am thinking the best option for the same money. 1000-1500$

Thanks
achilles

I would also like to know. I have had my eye on buddy clubs and stance GR+

The Tein Super Street coilover is not offered for the FD. The Tein Flex coilover has 10/8 spring rates. The Apexi N1 EXV is 12/12. The HKS Hipermax III Sport is 12/10. That being said most manufacturers will swap in softer springs at no extra charge. You should try calling them and talking about having the springs changed.

hi,
will the valving be ok if i change the springs?
do you have any experiense with the above options and brands?
thanks!

Changing from like 12 to 10 or 8 shouldn't require a revalve, but you should talk to the manufacturers to be sure. Revalving is generally only required for extreme changes in spring rates. I went with Tein Flex coil overs and would recommend them.

http://www.rx7store.net/product_p/teinss.htm

They sure are....

Though the springs on the SS's are stiffer than the Flex's.

To the OP. You will have a hard time finding soft springs in a coilover. Typically because of the nature of the adjustability. Softer springs will create issues with lowering the car.

You could look at these as a good option....
http://www.fdnewbieimports.com/Backu...ct3pic.php?n=6

GL OP

Also a very good read.... Could help eliminate some of your confusion...

http://www.rx7club.com/showthread.php?t=723617

Have you looked at the greddy s-types?

Ah your right I was looking at the SS with the pillow ball upper mounts. The standard SS are available for the FD.

I'm a fan of Pettits new offering.

http://pettitracing.com/rx7/index_suspension.htm