Rotary Car Club

Rotary Car Club (https://rotarycarclub.com/index.php)
-   RX-7 1st Gen Specific (1979-85) (https://rotarycarclub.com/forumdisplay.php?f=38)
-   -   MPG & Performance question...Hurley Rotary (https://rotarycarclub.com/showthread.php?t=11357)

codysa22c 05-28-2010 11:54 AM

MPG & Performance question...Hurley Rotary
 
this is a site hurley rotary the want a crazy amount of cash but is this mpg and performance really possible i know performance is but with the mpg there tlking abt but for the cash they want id figure it would just wondering......stock mpg is crap....and wht is the stock 0 to 60 with a stock 1980 rx7 12a id figure a good drive low 9s if you let it run in second all the way up to 60


this is hurley rotarys site and the page where i found this
http://www.hurleyrotary.com/page.php...ntpageref=6264

12arotary 05-28-2010 12:24 PM

that mpg is very possible with 12a's and not just from them I ran a stock port 12a in an 85 I had, stripped everything I didn't need and basically a perfect tune at 70mph I got close to 35mpg- not many believed me but it can be done

t_g_farrell 05-28-2010 12:58 PM

Sounds realistic to me. The 7 second 0 to 60 is very doable. The 30
mpg is going to be very subjective to driving style and such. I get 25
mpg on the highway with my Dell doing ~80 mph. With that twin SU
setup it should run very well down low and would lend itself to a lean
tune because of the size of the carbs.

codysa22c 05-28-2010 05:33 PM

Quote:

Originally Posted by t_g_farrell (Post 118926)
Sounds realistic to me. The 7 second 0 to 60 is very doable. The 30
mpg is going to be very subjective to driving style and such. I get 25
mpg on the highway with my Dell doing ~80 mph. With that twin SU
setup it should run very well down low and would lend itself to a lean
tune because of the size of the carbs.

ok thanks hey how hard is it to setup a twin setup??????? cause my stock carb is shit and im looking for better mpg while having better performance.....and how much is it cause my dad is paying for it now.....and he dont wanna put to much into it...and at the moment im job less so...cause i know the stock carb stucks so....


All times are GMT -5. The time now is 03:19 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Hosted by www.GotPlacement.com