Front (subframe) engine cradle
 

I was just wondering if anyone had problems reinstalling the front subframe and the 4 major bolts not lining up. Some tips and tricks would be helpful. Thanks in advance.

Depends, got the motor and tranny in the crade bolted up? You could support the motor from the top with an engine brace. Then the cradle is pretty easy to bolt back in, just put it on a tranny jack and yeah have someone help you line the bolts up.
Your bolts and holes may not be lining up because something is in the way, verify you have nothing in the way before you start prying and hammering.