GZ LIM group buy
 

Hey All, We would like to introduce ourselves with a group buy for the GZ (Xesessive Mfg.) Lower Intake Manifold.

List Prices for products can be found on Rich's Site and ours listed below:

http://www.azrotaryrockets.com/

http://www.xcessivemanufacturing.com



Polishing is going to be 110.00 per manifold.

Manifold at gb price 480.00 plus shipping and paypal fees

Also GB price on the Xesessive OIl Pan 395.00 plus shipping and paypal fees

Rich at Xesseive quoted a two week period to cast 15 manifoilds, add another week for polishing.

so again what about the xcessive LIM 4 PORT FUEL RAIL???? will this be included at an additional price or seperate. being that you can not use current aftermarket fuel rails without modification of 2 more ports. i already have the LIM im interested in the 4 PORT FUEL RAIL and the oil pan.
z

Well, the price for the manifold is for the manifold alone. No the rail is not included. I can get you a price on that rail tomorrow. I will pm you.

Thanks

Im down.

Count me in

1. KaiFD3S (Not Polished)

Hell of a deal.....

Glen, I'd be more than happy to give you a hand shipping these bad boys out if you need it. Not that you will but I'm here to help.

Whats the time limit on these bad boys?

Will the manifold come with plugs or caps for the extra injector bungs?...

i just moved over from the club.this is my first post but im good for it.i want a non polish manifold and possible fuel rail depending price.
rx7club screen name lgjp2631 been there for years

Well it is going to be up for atleast a couple of weeks. The foundry has to finish this batch of castings then they need to be machined before shipping. I will keep everyone in the loop.

Yes, they come with the plugs for the two extra injector ports if they are not going to be used.

Damn rx7club deleting my links.

Tell your friends about this GB guys, we need to get this word out and help this forum grow!

I am interested in the Oil Pan. Just a question, are they in stock? I have been trying to get one for some time but have been told they are out of inventory. So I was just going to get the Banzai Racing oil pan brace instead.

So if the pan is available I will probably jump on that.

so with a group buy of 10-12 we can only get $30 off? Or did I miss something?

sk8world is no longer apart of this group buy, please purchase elsewhere:rofl: J/K of course....acually the list is 525.00 I had a typo on the site for 510.00
sorry for the confusion.

Well if it turns out to be 10-12 I might beable to do a little better but there is not alot of mark up on this product.

Let get this organized, please copy list below and add you name if you are going to want one of the manifolds, oil pans, or rail.

Manifolds:
1.
2.
3.

Oil Pan:
1.
2.
3.

Fuel Rails
1.
2.
3.

Manifolds:
1. KaiFD3S ( Not Polished )
2.
3.

Oil Pan:
1.
2.
3.

Fuel Rails
1.
2.
3.

Manifolds:
1. KaiFD3S ( Not Polished )
2.
3.

Oil Pan:
1.proz07
2.
3.

Fuel Rails
1.proz07 (4 port)
2.
3.

Manifolds:
1. KaiFD3S ( Not Polished )
2. ryan1 ( not polished)
3.

Oil Pan:
1.proz07
2.
3.

Fuel Rails
1.proz07 (4 port)
2.
3.

Manifolds:
1. KaiFD3S ( Not Polished )
2. ryan1 ( not polished)
3.

Oil Pan:
1.proz07
2.
3.

Fuel Rails
1.proz07 (4 port)
2.KaiFD3S (4 Port)
3.

does their fuel rail provide a location for the fuel temp sensor? or is it like a KG rail but for 4 injectors instead of 2?

Manifolds:
1. KaiFD3S ( Not Polished )
2. ryan1 ( not polished)
3. Max_Spd (Not Polished)

Oil Pan:
1.proz07
2.
3.

Fuel Rails
1.proz07 (4 port)
2.KaiFD3S (4 Port)
3.

Im in on the Oil Pan!
 

Manifolds:
1. KaiFD3S ( Not Polished )
2. ryan1 ( not polished)
3. Max_Spd (Not Polished)
4.

Oil Pan:
1.proz07
2.d33 (Danny)
3.

Fuel Rails
1.proz07 (4 port)
2.KaiFD3S (4 Port)
3.

Manifolds:
1. KaiFD3S ( Not Polished )
2. ryan1 ( not polished)
3. Max_Spd (Not Polished)
4. Charlies7

Oil Pan:
1.proz07
2.d33 (Danny)
3.

Fuel Rails
1.proz07 (4 port)
2.KaiFD3S (4 Port)
3.

Took myself off the Fuel Rail list as I may be able to use mine...

Manifolds:
1. KaiFD3S ( Not Polished )
2. ryan1 ( not polished)
3. Max_Spd (Not Polished)
4. Charlies7

Oil Pan:
1.proz07
2.d33 (Danny)
3.

Fuel Rails
1.proz07 (4 port)
2.
3.

I'm Mono4lamar on rx7club. What's the price on the 4 port fuel rail? Also, the price from Pineapple racing is 510 so that pretty much makes the retail price 510. I was also hoping for a much better discount. Pending on the price of the fuel rail and hopefully a better group buy price I'll be interested. Thanks!

Manifolds:
1. KaiFD3S ( Not Polished )
2. ryan1 ( not polished)
3. Max_Spd (Not Polished)
4. Charlies7
5. speedjunkie (not polished)

Oil Pan:
1.proz07
2.d33 (Danny)
3.

Fuel Rails
1.proz07 (4 port)
2.
3.

Ok people, look i am trying to help. Thats it, I stand to make 15 bucks at the most on these. So if you dont like the price go buy it retail. Simple, 525.00 is the manufacturers price ,if some one lowers it than buy it from them. It is not 480.00 I assure you.

My question here is that of time. From now, how long would it be to receive this? I'm in a crunch and it's going to be before April, then yea! I'm due to tune and this is kind of last minute and would rather not tune just to slap this on and screw it all up.

Thanks in advance!


Manifolds:
1. KaiFD3S ( Not Polished )
2. ryan1 ( not polished)
3. Max_Spd (Not Polished)
4. Charlies7
5. speedjunkie (not polished)
6. Railgun (unpolished)

Oil Pan:
1.proz07
2.d33 (Danny)
3.

Fuel Rails
1.proz07 (4 port)
2.
3.

Manifolds:
1. KaiFD3S ( Not Polished )
2. ryan1 ( not polished)
3. Max_Spd (Not Polished)
4. Charlies7
5. speedjunkie (not polished)
6. Railgun (unpolished)
7. Brent (not polished)

Oil Pan:
1.proz07
2.d33 (Danny)
3.

Fuel Rails
1.proz07 (4 port)
2.
3.

hello there im 13bmaniac on the rx7club im down with a lim manifold as well not polished.. hope we can still get a better price but still better this way

Manifolds:
1. KaiFD3S ( Not Polished )
2. ryan1 ( not polished)
3. Max_Spd (Not Polished)
4. Charlies7
5. speedjunkie (not polished)
6. Railgun (unpolished)
7. Brent (not polished)
8. 13bmaniac (not polished)

Oil Pan:
1.proz07
2.d33 (Danny)
3.

Fuel Rails
1.proz07 (4 port)
2.
3.

i def want the manifold not polished but whats the price on the fuel rail?
Manifolds:
1. KaiFD3S ( Not Polished )
2. ryan1 ( not polished)
3. Max_Spd (Not Polished)
4. Charlies7
5. speedjunkie (not polished)
6. Railgun (unpolished)
7. Brent (not polished)
8. 13bmaniac (not polished)
9. silverfd3s ( not polished)
Oil Pan:
1.proz07
2.d33 (Danny)
3.

Fuel Rails
1.proz07 (4 port)
2.silverfd3s (matching rail for manifold)depending price
3.

Hey all looking good, I will get prices on the rail for all that need one. Should be monday.

...

Oh sorry I missed that. I will find out I think you can get it with or without.

Last one we had did not have a place for the sensor so we drilled and tapped for it .

Any word?

Thanks,
Dan

hey whats goin on here is the gb cooling off or what i think some of us need that lim ASAP

just toknow what are the latest updates

Well looks like Xessesive has a few more to get from the foundry and they will have enough to cover this group buy. Should be next week we can start shipping. So lets get are names up here quick

Rails are going to be 240.00

Sorry guys and gals I dont get a great deal on these and I am there dealer...I think they pay alot for the extrution.

I also dropped the ball and forgot to ask about the sensor bung in the rail...sorry again I am only humna:seeya:

im real interested

Have there been any dynos back to back to show what increases in HP this gives. Equalizing the flow between the front and rear rotor is always benefit but I can clean those AFR's up with my ecu. I'm just wondering if the LIM is really the restriction in the stock setup.

I dont see why not..The LIM is equal flow and has larger runners. More fresh air to the rear cant hurt.