New Zealand mamber
 

Just going to post pics of some of my rotarys here, to get this section going:)

please check out my web site (its out of date and needs a clean up, but theres a few good pics)
The below pics are from the (or near) start of a 20b project I did a few years ago.

http://rotan20b.tripod.com/index.html

more 20b pic
 

more 20b pics, the smaller intercooler is a std 20b intercooler modded, the other one is a 600mm by 400mm? bar and plate. plus a pic of the inside.

some pic of my 8
 

Pics of the bolt ons and mods I've done to my rx8:)

some more 8 pics
 

some more 8 pics

13brew Cosmo Motor
 

another project I did, was a 13brew project, these motors have the same ports/plate as the 20b, out of the 13b's this would be my pick.
Note the clutch set up.

pics from a track day
 

pics from a track day, batterys ran flat, so only got 5 pics in:(

pics of rotarys I've had
 

pics of rotarys I've had.
2000 Series 8 Rx7 Batman type R, bought at 12,500 miles

series 1 and 2
 

Series 1 and 2 rx7's, the red series 2, I bought as a bare shell, and built up, couldn't get series two bumpers so used series one bumpers.

series 4/5
 

The Series 4/5's

WOW! Nice collection!

Quick question, is there a big rotary forum in New Zealand?? I would like the guys in New Zealand to know about RCCDigizine.com

Also, I would like to do a story about your collection if you don't mind...

rotary forum in nz
 

Not a collection anymore, all bar the rx8 have been sold, I should have kept at less the series 8 and series 2, but --- just needed the $$$$$

There are a few forums for rotary in New Zealand, but these are small in numbers compaired to this forum or rx7/rx8.com forums.
The rx8nz forum, I think has had the most of 18 people on it at one time, most days it'll be 2 or 3 members.
Here are some links to them--

http://rx8nz.web44.net/index.php

http://www.kiwirotary.com/phpbb3/index.php

http://mrec.rotary.net.nz/

Qustion for Herblenny
 

Herblenny, Would you mind if I post part of RCCDigizine.com, on a New Zealand Rotary (rx8nz) forum, with the link to it ??
The Decal RCC stickers how would I get some, and the cost??
Thank you-- Dave.

wow, you've been around the rotary block a few times!! Great taste man!

It has to be a smaller scene since you're all limited to the island. So far we've seen 3 NZ members and you all seem to be track-junkies!

Can wait to see more track events from there!

track
 

yip, hopping to get on the track tomorrow, as I Now have removed the 180k cut (JDM rx8) and have played with a few other things, along with the AME intake, Sould be a great.
I'll try and get the camera off the wife again so I can get some better pics this time:)

EDIT: opps.....somehow didn't see the 2nd page........


There are a couple of rotor websites around NZ, some i wouldn't really waste my time with..

Im a moderator on www.kiwirotary.com - Which doesn't have a huge amount of traffic goin through it ....
but there is also
http://mrec.rotary.net.nz/ - which is a good club based website
unsure of this 1:
http://www.getrotord.com/html/members_gallery.php

Trav.

Thanks for the info RX8man and ROT808,
Yeah, if you guys could post about RCC Digizine, I would greatly appreciate that!

Here are some photobucket pics for the RCCD..

http://s37.photobucket.com/albums/e7...current=Ad.jpg

http://s37.photobucket.com/albums/e7...=Logosmall.jpg

Currently we have great deal of people downloading from Australia... I'm hoping people from all over the world will download.

thanks again for the support and thanks for spreading the word.

i still want some 12a turbo stuffs...

RX8 Club NZ
 

Herblenny, you are now a member of the rx8 club NZ
thanks for joining :)

12 A Stuff
 

Check out NZ Auction site
http://www.trademe.co.nz/
Rodger, his user name on TM is "2rotor", to find him, go to Community-- then Member profiles-- & type in 2rotor in the search box.
I know he has alot of 12A part/cars.

that is cool site too look around on. Kinda makes me wish i was local to alot of the larger items...

Trade me
 

My user name is discotec, on trade me, keep a watch on what I sell, Coz I deal in some odd rotary stuff, which I've sold State sold side a few time eg
Like the Rotor radio buttons, (rx8) etc

rotor stuff
 

Starter Button is from a S2000, with a outter Rotor symbol I made up, radio button, and wheel C.Cap

I remember TRADE ME! Some guy was selling a FWD 12A-powered Puke GREEN honda CIVIC on there years ago!

very cool site!

latest rotor detail
 

These are the latest rotor detail symbols I've done, and no the engine/motor cover will not fit on with these fitted.
see pics

trans plants
 

I don't think the Mini (1960-1980's) was sold states side, but some guy, and he raced this thing, fulley fitted a 12A turbo in one.

I'll see if I can find some pics:)

I think so?? I don't know.. I got an email from someone asking why I wanted to join??? I said, because I own an 8... hope that was a good enough reason??? I don't know.. Kind of weird if you ask me:)

rx8 club
 

I haven't seen that e-mail text (I didn't set it up), It was set up so new members would introduce them selfs (see new members tread), and we have had a couple join that ... had... personal Agenders.
I'm Dave on that site, if you have any qustions, etc , please feel free to PM or E-mail me:)

12A mini pics
 

Found some pics of that Mini

oooo

I want to Immigrate to New Zealand... maybe after school.