Goopy Solid One Piece Dowel Pins ....Now in stock !
 

New technology from Goopy Performance

Precision manufactured solid Dowel pins for 12A, 13B and 20B engines.
These solid dowel pins help keep High HP engines aligned adding rigidness.

One can be used on the lower side with no modifications now if you wish to run 2 solid dowel pins you will be required to run external oiling so you can bypass the oil passage in the oem dowels.



$125.00 13B & 12A

$175.00 20B



Goopy Performance
Stony Point NY 10980
845-947-0007
www.GoopyPerformance.com

MAtt 6:33

no modification require, Neat. I know it was a pretty penny to get my extra dowels installed. Or pinned what ever you call it. Good deal here..

Nice!! I'll think about this for the next build.

So is the tension bolt left out if you run one in the lower position?

the housing is the weak point, not the dowel pin. i don't get it.

^^me to...:suspect:

You can add one solid dowel pin on the lower side for extra strength with no modifications.
One of the primary reasons for these pins is keeping the front and rear main bearings (more) concentric.

Sounds like a good idea as long as you use two dowels. What kind of material are you using to match the hardness of stock dowels?

Is the price for a pair? And would these be just as good as studding or pinning.

They are made with a proprietary alloy intended for its overall toughness.
Price is 125.00 each on the 13B.

There is an advantage to using these over the factory dowels but they are not meant to replace our oversize bolt kit.

very nice .

Thank you...I guess i will have to stud the engine or try an install a REW into my FC.

Where do I get a rebuild kit from yall?

solid dowel pins
 

I have been looking for someone who made solid dowels and even looked on Goopy's site . Must be a new product that has yet to be added . Glad to see them and will call to order when ready ... hopefully soon .

solid corner seals
 

I would love to know a little more about your solid corner seals , are they heat treated ? I suppose the black color is the coating for break in . Is there anyone I can contact you have sold them to , I would like to get some feedback about the material used and if anyone has pigged -detonated and taken apart to determine how well they help up .. please do not think me to be some jerk ..just can't find any feedback concerning your corner seals . Great idea on the over size corner and apex seals!!!! smart products!!!

solid corner seals
 

I would love to know a little more about your solid corner seals , are they heat treated ? I suppose the black color is the coating for break in . Is there anyone I can contact you have sold them to , I would like to get some feedback about the material used and if anyone has pigged -detonated and taken apart to determine how well they held up .. please do not think me to be some jerk ..just can't find any feedback concerning your corner seals . Great idea on the over size corner and apex seals!!!! smart products!!!

PM us or email @ info@goopyperformance.com

20B dowels

If one was also drilled out for use in the oil upper dowel, then it still would be stiffer than the stock two piece.

I have my own dowels that are heat treated & then cryo treated finally I spray a ceramic lubricating coating to aid in building and tare down.. total cost if anyone is interested $160 for both !! don't over pay for these very simple products .