Rotary Car Club - May Old School Rotary Of the Month Nominations LAST CHANCE ENTER NOW

Rotary Car Club (https://rotarycarclub.com/index.php)

- Rotary Of The Month Contest (https://rotarycarclub.com/forumdisplay.php?f=125)

- - May Old School Rotary Of the Month Nominations LAST CHANCE ENTER NOW (https://rotarycarclub.com/showthread.php?t=11126)

May Old School Rotary Of the Month Nominations LAST CHANCE ENTER NOW

May 2010 Old School Rotary of the month nominations.

If you have or know of a pre 1979 rotary then nomintate it now!
You must have at least 3 photos, interior, exterior, engine bay and have a mod list or detailed description of the car and what you have done or plan to do to it.

Thanks for participating!

I nominate Chad's RX-2. I hope Chad can post some pics of it here.

Holly

If photos can be provided plus description, he may be the winner by default...

where is all of our old school rotary guys at?

I nominate my dad's ( jfaplanet) 74 REPU he can add pictures and details that are needed but here's one picture for now.

http://i293.photobucket.com/albums/m...Picture071.jpg

Might as well enter my 1976 Rx-4. It's not complete yet, but damn close. I'll get some pictures of it up tomorrow.

Here are some pictures of my Rx-4. I do have some more recent ones on my camera I'll have to post as well.

Attachment 7967 Attachment 7968 Attachment 7969
Attachment 7970

Alot of the mods are listed in my signature for the engine. The car itself has an aluminum racing fuel cell, carter fuel pump, holley fpr. The exhaust is a RB road race header, dual 2.5" with moroso spiral flow mufflers to the rear axle. From there it merges to a single 3" with a magnaflow muffler. 2nd gen FMOC with braided stainless lines, DLIDFIS ignition. The list goes on and on. I'm waiting on a clutch and flywheel to put this whole thing together and get it running. Hopefully in the next two weeks or so.

If we don't get any other nominations, or photos / descriptions of current nominations by may 1st then Buggy will be winner!

Quote:

Originally Posted by ROTORX7Holly (Post 116991)

I nominate Chad's RX-2. I hope Chad can post some pics of it here.

Holly

Thanks Holly.
My Rx2 is a 73 Rx2 with 77k original miles, all original 12a twin dizzy motor, 4 speed.
Mods: Currently a red line goods shift boot and ebrake boot.
Mods underway: Adding a OEM AC unit to the car, adding a limited slip chunk in, a set of 15" mesh rims, and doing some small detail cleaning.
Keeping as stock as possible to truly enjoy the car as mazda made it.

I'm going to try one last time.
1968 Mazda 1500 Deluxe Estate
13B 6 port
Microtech Lt-10s ECU, handset
BTR Alloy radiator and oil cooler
16" Spal fan
S4 Turbo gearbox, lightened flywheel, Extreme clutch
3" tailshaft
Rx5 diff
Mazda 1500SS/1800 front brakes
Bosch EFi pump, Rx7 pre-pump
Large surge tank
Twin 2" steampipe exhaust mandrel bends, Rotaflo muffler with 3" dump tip

Momo steering wheel
Miata seats retrimmed
Fneder mount mirrors

Pics on the way

More pics of my Rx-4.
Attachment 7981 Attachment 7982 Attachment 7983
Attachment 7984 Attachment 7985

I put in two pics of my R100 as well. Maybe it will win for most rust and moss on an old school rotary!:biggthumpup:

where did you find that thing? bottom of a lake?

Quote:

Originally Posted by bwaits (Post 117164)

Where do we vote?

voting is currently for April car of the month,
http://rotarycarclub.com/rotary_foru...ad.php?t=11036

Voting for may will start May, 1st.

Quote:

Originally Posted by FcRx8MEL (Post 117065)

I nominate my dad's ( jfaplanet) 74 REPU he can add pictures and details that are needed but here's one picture for now.

http://i293.photobucket.com/albums/m...Picture071.jpg

http://i470.photobucket.com/albums/r...10/DGRR154.jpg

http://farm5.static.flickr.com/4048/...eec78e2aef.jpg

As for mods:

74 Mazda Rotary Pickup
Street ported 13b
Racing Beat Header
Dellarto 48 side draft
Aluminum Radiator with elec fan
Wire tucked engine bay
Electronic Ignition
FB alternator
AC, Dealer add on
New Carpet
Re-upholstered seat
1" front sway bar
rear sway bar
lowered 2"
210,000 miles
Daily driver

Quote:

Originally Posted by Gravity Fed (Post 117248)

where did you find that thing? bottom of a lake?

Close, in a guy's personal salvage yard. He though he owned it for about 5 years and he bought it out of some farmer's field. It's been outdoors for a few years. But the price was right, and the 10A still turns over!

Buggy,
Welcome to the forum, and thank you for rescuing that beautiful car! What a wonderful transformation. Keep us updated on the progress, and upload pics when it's all done. I love these old-school rotaries. I can't believe more people didn't enter because there are so many great ones out there. Thanks to those who did!

Quote:

Originally Posted by butterfly21kaye (Post 117356)

Thanks! I'm going to put a build thread together of the Rx-4 once it's completed. I've got a lot more pictures of it as it was being built, and I'll take more detailed ones of certain parts of the car. I'm getting really excited at this point to finally be able to drive it after almost a years worth of work.

Quote:

Originally Posted by Renesis NC (Post 117317)

1969 Mazda Cosmo Sport L10B
Cheers,
Danny

WOW, Danny, wish we had those here in the USA! Very Nice!!!
She would look good with my Stable of Rotary Babies.

Thanks for posting those pics Kevin. They tell the story of the birth of frankenrotor quite well.

When will the voting begin for these sweet old school rides?

Nominations will be over on the 15th and posted for voting soon after. Gravity can you take care of this, If I have WIFI on the plane or on my layover on the 15th I could do it then if not.