GB: Rotary-Works 90mm CNC Cut Billet Aluminum Throttle Body
 

I just got off the phone with owner of Rotary-Works.com

Here is the GB pricing..

For any of their CNC Cut Billet Aluminum Throttle Body (for FC, FD, or 20B) he has given me the following pricing..

10-19 sets

$325 for regular billet aluminum (non-anodized) TB
$350 for Black anodized billet TB

20+ sets

$300 for regular billet aluminum (non-anodized) TB
$325 for Black anodized billet TB

This does not including shipping.

Here are pics of the TB

For FC's
http://www.rotary-works.com/mm5/grap...B-RX7-FC-b.jpg

For FD's
http://www.rotary-works.com/mm5/grap...RX7-FD-2-b.jpg

For 20B (pretty much same as FD)
http://www.rotary-works.com/mm5/grap...RX7-FD-2-b.jpg

Black anodized
http://www.rotary-works.com/products...FD-BLACK-1.jpg

And for more detail info: http://www.rotary-works.com/mm5/merc...gory_Code=THBD


Lets start a list and post here what type of TB you would like..

Once we hit list of 10, we'll decide if we'll wait to see if we could hit 20+ before I tell him about how he would like to go about ordering.


LIST for 90mm TB (When time to order, order of the list is how it will be shipped... Also GB will end if we hit 20.)

1. Herblenny - 20B TB and maybe 13B REW TB (pending how soon I get my 20B kit).

1. Herblenny - 20B TB and maybe 13B REW TB (pending how soon I get my 20B kit).
2. Proxy One - FD Regular billet aluminum

1. Herblenny - 20B TB and maybe 13B REW TB (pending how soon I get my 20B kit).
2. Proxy One - FD Regular billet aluminum
3. 20b 3rd gen - 20B billet aluminum

1. Herblenny - 20B TB and maybe 13B REW TB (pending how soon I get my 20B kit).
2. Proxy One - FD Regular billet aluminum
3. 20b 3rd gen - 20B billet aluminum
4. Rob - REW regular Billet Aluminum

1. Herblenny - 20B TB and maybe 13B REW TB (pending how soon I get my 20B kit).
2. Proxy One - FD Regular billet aluminum
3. 20b 3rd gen - 20B billet aluminum
4. Rob - REW regular Billet Aluminum
5. PortedRotorTuner - FD Billet Aluminum

1. Herblenny - 20B TB and maybe 13B REW TB (pending how soon I get my 20B kit).
2. Proxy One - FD Regular billet aluminum
3. 20b 3rd gen - 20B billet aluminum
4. Rob - REW regular Billet Aluminum
5. PortedRotorTuner - FD Billet Aluminum
6. Allrotor93 - 20B BA

Can you spam the other forum? I am sure we can get 4 more

Guess I made a mistake on selling mine, so I'll join in to get another one..LOL...I knew I would end up buying again..


1. Herblenny - 20B TB and maybe 13B REW TB (pending how soon I get my 20B kit).
2. Proxy One - FD Regular billet aluminum
3. 20b 3rd gen - 20B billet aluminum
4. Rob - REW regular Billet Aluminum
5. PortedRotorTuner - FD Billet Aluminum
6. Allrotor93 - 20B BA
7. KaiFD3S - FD regular Billet Aluminum

hell put me down for one......

1. Herblenny - 20B TB and maybe 13B REW TB (pending how soon I get my 20B kit).
2. Proxy One - FD Regular billet aluminum
3. 20b 3rd gen - 20B billet aluminum
4. Rob - REW regular Billet Aluminum
5. PortedRotorTuner - FD Billet Aluminum
6. Allrotor93 - 20B BA
7. KaiFD3S - FD regular Billet Aluminum
8. 93vrfd_houston - fd billet aluminum

fd billet for me

1. Herblenny - 20B TB and maybe 13B REW TB (pending how soon I get my 20B kit).
2. Proxy One - FD Regular billet aluminum
3. 20b 3rd gen - 20B billet aluminum
4. Rob - REW regular Billet Aluminum
5. PortedRotorTuner - FD Billet Aluminum
6. Allrotor93 - 20B BA
7. KaiFD3S - FD Regular Billet Aluminum
8. 93vrfd_houston - fd billet aluminum
9. thecrowe - FD Regular Billet Aluminum

I personally don't want to do it as they might think I'm trying to make money.. which I'm not. But I'm sure someone else could mention it ;)

LOL! If we hit 20, Im getting another one for the 20B.

Once we hit 10, I'll ask them about how they want to handle the situation. Maybe have some sort of time line in place so those of us wanting the TB soon will go ahead and order and get the difference later? I don't know.. Or just have a deadline and order.

I'll let you guys know once we hit 10... which we need one more person!

Phil

I put in some shameless plugs but I am sure they will get deleted

I'll be your Huckleberry. haha

1. Herblenny - 20B TB and maybe 13B REW TB (pending how soon I get my 20B kit).
2. Proxy One - FD Regular billet aluminum
3. 20b 3rd gen - 20B billet aluminum
4. Rob - REW regular Billet Aluminum
5. PortedRotorTuner - FD Billet Aluminum
6. Allrotor93 - 20B BA
7. KaiFD3S - FD Regular Billet Aluminum
8. 93vrfd_houston - fd billet aluminum
9. thecrowe - FD Regular Billet Aluminum
10. MotoTek - FD Billet Aluminum

1. Herblenny - 20B TB and maybe 13B REW TB (pending how soon I get my 20B kit).
2. Proxy One - FD Regular billet aluminum
3. 20b 3rd gen - 20B billet aluminum
4. Rob - REW regular Billet Aluminum
5. PortedRotorTuner - FD Billet Aluminum
6. Allrotor93 - 20B BA
7. KaiFD3S - FD Regular Billet Aluminum
8. 93vrfd_houston - fd billet aluminum
9. thecrowe - FD Regular Billet Aluminum
10. MotoTek - FD Billet Aluminum
11. jamespond24-20B Billet aluminum

I recruited a few more from the other side...give it a week or so and see if we hit 20.

Maybe we can talk them into giving us the 20 discount anyways since we are basically the test subjects

Can we get these without their logo on it?

Kai didn't you buy one of these, and sell it already? lol

He sold it to me and I give it to my friend so he can test it out. My friend ran 8.81 153mph 1/4miles with a stock FD TB, going to find out if the time or trap speed changes with this 90mm TB.

My friend told me the 90mm TB has a deeper tone than the stock ones.

1. Herblenny - 20B TB and maybe 13B REW TB (pending how soon I get my 20B kit).
2. Proxy One - FD Regular billet aluminum
3. 20b 3rd gen - 20B billet aluminum
4. Rob - REW regular Billet Aluminum
5. PortedRotorTuner - FD Billet Aluminum
6. Allrotor93 - 20B BA
7. KaiFD3S - FD Regular Billet Aluminum
8. 93vrfd_houston - fd billet aluminum
9. thecrowe - FD Regular Billet Aluminum
10. MotoTek - FD Billet Aluminum
11. jamespond24-20B Billet aluminum
12. neit_jnf - FD regular with CC if available

OK. I'm going to contact RW and see how they want to handle this..

Haha, yeah impulse buy and impulse sell now it is a serious buy....LOL..:driving::banghead:

Got in contact with RW. They are going to figure out how to handle this.. I'll keep you guys updated... hopefully by sometime next week.

Hey guys, I been away because my kid had to be admitted to the hospital for the past 4 days. Anyhow, I have talked to the RW and they asked me to get your emails as a confirmation/verification.

So, Please PM me with your full name, SN, email. Once I have 10 of you, I'll pass it on to RW and they will give me a code and number for you to call or email to place an order.

PHIL

Hey Phil,

Sorry to here about your little one. I hope everything is ok

What are the bene's of this TB over a standard one? Throttle response? Higher top end? Bling factor? I'd be willing to put my name in if there are known bene's. Maybe he can cut me a break if I make a few dyno tests for him ;)

Hell, glad I caught this......
1. Herblenny - 20B TB and maybe 13B REW TB (pending how soon I get my 20B kit).
2. Proxy One - FD Regular billet aluminum
3. 20b 3rd gen - 20B billet aluminum
4. Rob - REW regular Billet Aluminum
5. PortedRotorTuner - FD Billet Aluminum
6. Allrotor93 - 20B BA
7. KaiFD3S - FD Regular Billet Aluminum
8. 93vrfd_houston - fd billet aluminum
9. thecrowe - FD Regular Billet Aluminum
10. MotoTek - FD Billet Aluminum
11. jamespond24-20B Billet aluminum
12. neit_jnf - FD regular with CC if available
13. EJayCe996 - FC regular billet aluminum

Oh, and for any other FC owners interested, ours are 80mm according to the site.

Not that I'm complaining if I end up being the only FCer on this since the majority are flakes anyway :rofl:

I'm an FC owner also I order the TB for my FC 20B :D

OK guys.. You need to PM me with your info!!

As of now, I have 7 people who has PM'd me or emailed me with their info.. We need 3 more to complete the 10 required!

Now I have 8 people who have sent me their info..

2 more and I'm sending in the list so you guys can start ordering.

Code is specific to you and the order on the list plus who PM me with the info... If you don't PM me before 10 is reached, you will loose your spot even though you put your name on the list... So, PM ME ASAP!!!

PM Sent

Awesome!

We now have 10 signed up!!

I will however wait til 9AM CST tomorrow to submit the list to Rotary Works. After the 9AM, I will send you an email with contact info to Rotary Works and specific Confirmation email and code to be used to order your TB.

Phil

Hey wait I pm you last week with my info and I haven't got an email from you. What's going on?

He will email us after he talks to RW

Email has been sent to RW with the list.

once I get a reply back, I will email you all with details.

Phil

Ohh sorry I thought the email is for confirmation of purchasing.

Thanks

Got my email and just got off the phone to place my order...Cat wait...LOL...Second time ...haha

Can I still get in on this?

Wait a week or so.. Until everyone places in their order (or by next monday).

I'll see how many have actually ordered and if its under 10.. I'll post here.

Phil

They need a 13B-RE solution damnit