Rotary Car Club

Rotary Car Club (https://rotarycarclub.com/index.php)
-   DGRR Archive (https://rotarycarclub.com/forumdisplay.php?f=204)
-   -   New Year, Same Great Event, 20 days left!!!!! what's on your todo list? (https://rotarycarclub.com/showthread.php?t=13050)

TitaniumTT 01-01-2011 03:41 PM

New Year, Same Great Event, 20 days left!!!!! what's on your todo list?
 
Lets here it! What are you you finishing up/bringing new this year? I'll start off with like 1/4 of my list
1) Repair/Repaint front bumper, hood, both doors, rear bumper :scratch:
2) Finish up the traction control
3) New Gaskets for the Fuel Cell
4) BellyPan
5) 6-spd!

reddozen 01-01-2011 04:34 PM

1) Finish the damn DGRR XI registration pages...
2) Get my bridge port in the car

mazdadude7 01-01-2011 10:22 PM

finish prep work on the car and paint it then put it back together.

2gslse 01-01-2011 10:45 PM

change oil, check air in tires,roll fenders and maybe retune the power FC its been 3 or 4 yrs.

djmtsu 01-03-2011 07:58 AM

1) Buy another RX-7
2) ???
3) Profit!

My5ABaby 01-03-2011 08:28 AM

1. Resolve to quit making such horrible decisions on New Years Eve.
2. Fix my fuel tank
3. Put in black manual seat belts
4. Track down and fix the drivetrain vibration
5. Fix my power steering
6. Fix my cigarette lighter (probably just unplugged or something)
7. Hook up my overhead lights
8. Bodywork/paint (probably won't happen)

Kane 01-03-2011 09:14 AM

-Retune
-Replace Fuel Line and Adapter for FP Gauge
-New Tires, 275 Rear, 235 Front
-Annual Service, Diff, Tranny, Oil etc...

Waffles 01-03-2011 09:29 AM

1. Put the ported motor into the RX7
2. rebuild the 5speed tranny

orion84gsl 01-03-2011 07:17 PM

1. Remove stock perch on replacement front struts and weld on new perches. Swap coil over collars/springs/dampers/camber plates over to new struts.
2. Install new front brake rotors and wheel bearings.
3. Install MSD 6A and 2 Jacobs coils.
4. Mount wheels and tires
5. Alignment
6. Tune the carb/set timing. Hopefully some dyno time before DGRR, but probably not.
7. Install louvers on hood and repaint.
8. Reinstall 3-point strut brace.
9. A good engine bay degreasing and interior cleaning.

N.RotaryTech 01-03-2011 08:32 PM

1. Put motor back together & put it back in car.
2. Swap diff with a lsd diff.
3. Swap auto seat belts with manual belts.
4. Repair & paint hood vent.
5. Replace tires with better tires.
6. Aaand maybe something else.

speedjunkie 01-04-2011 12:32 AM

Quote:

Originally Posted by My5ABaby (Post 136359)
6. Fix my cigarette lighter (probably just unplugged or something)

I had no power from mine a couple years ago and it was the socket itself. I had power to it and everything. Just a thought. Before that I never knew it could go bad haha.


1. possibly paint engine bay (but probably not)
2. possibly install ducting for the VMIC
3. hopefully new coil setup and reinstall cruise control
4. possibly construct custom gauge pod setup/change gauges
5. get the front fenders modified to match the rear fenders
6. ss braided lines and reroute for water injection
7. possibly move battery again this time to storage bin behind passenger seat
8. help roommates get their FDs running/finished so they can go too

I just finished a bunch of projects so I want to drive it again and I don't want to take any chances on it not being ready by April. I haven't been to DGRR since '06 and I'm dying to go again.

IH8DSM 01-04-2011 12:50 AM

To much stuff

1. Order and install coilover set up
2. Order and install wheels and fender flares
3. Replace fuel filter
4. Double check all new and old parts

Hopefully I will have it all done way before the gap hopefully be the keyword

darthrotary 01-04-2011 09:02 AM

1. 13B-REW swap into my FB! (Yes Holly, HollyII will be reborn!)
2. Back to original body panels, getting rid of that ugly ass bumper!
3. PAINT!
4. ALL mandatory maintenance (Fluids, BRAKES! and Tires, ect.)

My5ABaby 01-04-2011 09:02 AM

Quote:

Originally Posted by speedjunkie (Post 136519)
I had no power from mine a couple years ago and it was the socket itself. I had power to it and everything. Just a thought. Before that I never knew it could go bad haha.

It works eventually if I mess with whatever I plug in enough. Not sure what all is up with that but I'll test it out. :dunno:

Proxy One 01-04-2011 02:46 PM

Im bringing my FD this year instead of the Rx2, I need to get it tuned and might have some new wheels by then too.


All times are GMT -5. The time now is 12:37 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Hosted by www.GotPlacement.com