Not sure:dunno: Whizbang

I have T-5s laying around I would love to stick to a rotary.

Just a small update.

Got the tail shaft done by the guys at Jayben. 3 inch, one piece.:)


http://i227.photobucket.com/albums/d...ps5a32959b.jpg
http://i227.photobucket.com/albums/d...psc18a2be2.jpg

i am loving this project

Started work on the sump as the custom one that come with the motor won't fit.:cuss: I had the flange cut then started working on how much room I have.

I removed the old front engine mount cross member as I need a bit more clearance.
http://i227.photobucket.com/albums/d...psc1094705.jpg
http://i227.photobucket.com/albums/d...ps47ad6fcd.jpg

Then I mocked up the lower half in cardboard.
http://i227.photobucket.com/albums/d...ps0e9c15e6.jpg
http://i227.photobucket.com/albums/d...pscf3707b6.jpg
http://i227.photobucket.com/albums/d...psb328ba42.jpg

Next to the old custom sump.
http://i227.photobucket.com/albums/d...psc260fe14.jpg

After that I modelled it up in Inventor.
http://i227.photobucket.com/albums/d...ps610189fd.jpg
http://i227.photobucket.com/albums/d...ps1b4ad7bb.jpg

Even welded it!
http://i227.photobucket.com/albums/d...psecc52ac2.jpg

Should give me a bit over 5 litres capacity.

Now I just need get the lower half cut.

Spent a bit of time in the shed last night an made a tail-shaft loop.

http://i227.photobucket.com/albums/d...ps2c0c07da.jpg

http://i227.photobucket.com/albums/d...psff5a045f.jpg

I used the factory studs for the old two piece tail-shaft.

Had a little bit more progress.

I got back the laser cut parts for the sump and tack them together for a trial fit up.


http://i227.photobucket.com/albums/d...ps36e46731.jpg

Good clearance on the crossmember.
http://i227.photobucket.com/albums/d...ps48e38da3.jpg

But after checking clearance on the oil pickup I knew I had a problem.:banghead:
http://i227.photobucket.com/albums/d...ps041baca6.jpg

This is a 13B turbo pickup.
http://i227.photobucket.com/albums/d...psb611bc21.jpg

Started to design a lower profile pickup.
http://i227.photobucket.com/albums/d...ps10aa57b8.jpg
http://i227.photobucket.com/albums/d...psd284beca.jpg

The sump will have to be modified.
http://i227.photobucket.com/albums/d...ps1b89008b.jpg

And even then I will have to lower the swaybar. Might have a look at some of those anti-dive spacers.
http://i227.photobucket.com/albums/d...pse32ee102.jpg

Made the sump pickup today! :D
http://i227.photobucket.com/albums/d...ps9bc94da7.jpg
http://i227.photobucket.com/albums/d...psce0f7735.jpg

Awsome project!

Looks good

Parts for my sump are made ready for welding! :biggthumpup:

The flange is screwed to a piece of 8mm steel plate to help with distortion, here with the sump pickup in place.
http://i227.photobucket.com/albums/d...ps422051c0.jpg

Here with the sump base and pickup cover plates.
http://i227.photobucket.com/albums/d...ps405d4a97.jpg

Hopefully organising the welding next week as I don't have an AC TIG to weld alloy. :(