Rotary Car Club

Rotary Car Club (https://rotarycarclub.com/index.php)
-   Show your rotary car build up. (https://rotarycarclub.com/forumdisplay.php?f=66)
-   -   FC3S Murray's never ending build. (https://rotarycarclub.com/showthread.php?t=7831)

WE3RX7 03-20-2011 12:30 PM

I love the LS....

































... in my Denali, lol...

FC3S Murray 03-21-2011 09:30 AM

lol whatever :)

Now take that motor out of your 5700lb Denali, put it in a 2800lb car and walk away with a 7.5 power-to-wieght ratio. Make it 6.3 if you add some small goodies:p(that is calculated with driver too;))

Here are some ratios:

CAR & Peak HP/PRICE/lbs-to-HP


Acura TSX=205 / $29000 / 15.7 /
Acura TL=286 / $39000 / 12.6 /

Audi TT=255 / $40000 / 10.9 /
Audi A3=250 / $34000 / 12.9 /
Audi RS4=420 / $66000 / 8.6 /
BMW 3 Series=300 / $41000 / 10.9 /
BMW Z4=330 / $51800 / 9.1 /

Bugati Veyron 16.4 =987 / $1,200,000 / 4.2 /

Buick LaCrosse=240 / $29000 / 14.5 /
Buick Lucerbe=275 / $35000 / 13.6 /

Cadillac CTS-V=400 / $51000 / 9.2 /
Cadillac STS-V=469 / $77000 / 8.2 /

Chevy Cobalt SS=205 / $22000 / 13.5 /
Chevy Corvette C6=400 / $45000 / 7.95 /
Chevy Corvette Z06=505 / $70000 / 6.3 /
Chevy Impala SS=303 / $28000 / 11.7 /
Chevy Malibu SS=240 / $25000 / 13.2 /
Chevy Monte Carlo SS=303 / $28000 / 11.0 /
Chevy Trailblazer SS=395 / $33000 / 12.0 /

Chrysler Crossfire=215 / $40000 / 14.0 /
Chrysler PT Cruiser=230 / $29000 / 13.3 /
Chrysler 300C SRT-8=425 / $40000 / 8.7 /
Dodge Caliber SRT-4=300 / $24000 / 9.8 /
Dodge Charger SRT-8=425 / $36000 / 8.9 /
Dodge Viper SRT-10=510 / $84000 / 6.7 /

Ford Mustang GT500=500 / $41000 / 6.7 /
Ford Mustang GT=300 / $28000 / 11.5 /

Honda S2000=237 / $34000 / 11.9 /
Honda Civic Si=197 / $24000 / 14.6 /

Hyundai Tiburon=172 / $20000 / 17.3 /

Infinite G35=315 / $35000 / 11.1 /

Jeep Grand Cherokee SRT-8=425 / $40000 / 11.2 /

Lexus IS350=306 / $35000 / 11.3 /

Lincoln MKZ=263 / $35000 / 12.9 /

Lotus Elise=190 / $43000 / 10.4 /
Lotus Exige=243 / $80000 / 8.1 /

Mazda MX-5=170 / $28000 / 14.35 /
Mazda RX-7 FD3S Type R Bathurst= 276 / $43000 / 10.1
Mazda RX-7 FC3s TitaniumTT Edition, ROTARY POWERED = 405/ $$don't ask / 6.9
Mazda RX-8=238 / $28000 / 12.7 /
MazdaSpeed3=260 / $24000 / 10.3 /
MazdaSpeed6=287 / $30000 / 11.1 /

Mercedes CLK=475 / $85000 / 7.5 /

Mini Cooper S=175 / $25000 / 14.5 /

Mitsubishi Evo XI=286 / $35000 / 11.18 /
Mitsubishi Eclipse=260 / $29000 / 14.1 /

Nissan Altima=365 / $30000 / 11.5 /
Nissan 350Z=315 / $42000 / 10.6 /

Pontiac Solstice GXP=260 / $26000 / 11.5 /
Pontiac G6=252 / $29000 / 13.4 /
Pontiac Grand Prix=303 / $28000 / 11.4 /

Porche Boxter S=295 / $65000 / 9.7 /
Porche Cayman S=295 / $70000 / 10 /

Saleen S7 Twin Turbo=750 / $600000 / 3.9 /

Saturn Ion=205 / $21000 / 13.4 /
Saturn Sky=260 / $29000 / 11.2 /

Scion tC=161 / $17000 / 18.0 /

Subaru STI=293 / $33000 / 10.3 /
Subaru Legacy=250 / $34000 / 12.2 /
VW Jetta=200 / $24000 / 16.1 /
VW GTI=200 / $23000 / 15.8 /

Volvo V50=218 / $35000 / 14.8 /
Volvo S60=300 / $36000 / 11.6 /
Volvo V70=300 / $37000 / 10.98 /
Volvo S80=311 / $45000 / 11.2 /


Thanks for reading my post to justify my guilty conscious:o21:

FerociousP 03-21-2011 09:45 AM

You had me at "Chrysler Crossfire=215 / $40000 / 14.0 /" :puke::9898:

chibikougan 03-21-2011 01:00 PM

Am I installing a receiver hitch on that bad boy so you can tow my rx2 to the races?

FC3S Murray 03-21-2011 03:02 PM

Quote:

Originally Posted by FerociousP (Post 144176)
You had me at "Chrysler Crossfire=215 / $40000 / 14.0 /" :puke::9898:

:p Yeah ya got to love google copy and paste. Quite the diverse list isn't it lol.

TitaniumTT 03-21-2011 03:06 PM

Especially the one in RED :suspect:

FC3S Murray 03-21-2011 03:09 PM

That one is a one of a kind!

FC3S Murray 03-21-2011 03:12 PM

NEW Better qaulity vid
http://www.youtube.com/watch?v=BmO-XNUVJVs

FC3S Murray 04-05-2011 09:48 PM

FIRST DRIVE yesterday.....MAN OH MAN was it SWEET!!

Everything works as expected. The Integra speedo only needed a little tap on the head and then the needle jumped and worked the whole 12 miles. The cooling temp differances in my gauges cleared up. The C6 Z06 clutch is very streetable, I was expecting something a little harsher lol. The low end torque is CRAZY...so nimble when cruising and has good street manners.

It goes to get the exhaust tomorrow morning. I drove it down today to the exhaust shop to have them take a peek at the ride height just in case I needed to raise it for their hoist. Height was fine. They were CRAZY EXCITED about it, I laughed as I pulled up because everyone in the parking lot/block was rubber necking me:))

Got some pics of it today....it is dirty as all hell but I forgot how nice she sits. :yay:
http://i721.photobucket.com/albums/w...urray/3007.jpg
http://i721.photobucket.com/albums/w...urray/3009.jpg
http://i721.photobucket.com/albums/w...urray/3015.jpg
http://i721.photobucket.com/albums/w...urray/3002.jpg
http://i721.photobucket.com/albums/w...urray/3006.jpg
http://i721.photobucket.com/albums/w...urray/3003.jpg

INTAKE DONE
http://i721.photobucket.com/albums/w...urray/3004.jpg
http://i721.photobucket.com/albums/w...ray/3005-1.jpg

Interior cleaned
http://i721.photobucket.com/albums/w...urray/3014.jpg

Ride height is nice but hopefully not too low(rear especially)
http://i721.photobucket.com/albums/w...urray/3011.jpg
http://i721.photobucket.com/albums/w...urray/3010.jpg

FC3S Murray 04-05-2011 09:49 PM

Exhaust DONE!!!!!
http://i721.photobucket.com/albums/w...urray/3024.jpg
http://i721.photobucket.com/albums/w...urray/3023.jpg
http://i721.photobucket.com/albums/w...urray/3025.jpg
http://i721.photobucket.com/albums/w...urray/3022.jpg

Turned out great looking!
http://i721.photobucket.com/albums/w...urray/3027.jpg
http://i721.photobucket.com/albums/w...urray/3028.jpg
http://i721.photobucket.com/albums/w...urray/3030.jpg
http://i721.photobucket.com/albums/w...urray/3029.jpg

VIDEO:
3 033

The car is WAY louder then the camera makes it seem. The 6" Magnaflows really have a nice rasp to them. However I am happy I dont freeway travel....these babies will drone at higher speeds.:)

All that is left now is to get my bumper installed, make a shroud for my radiator/ intake and take it to Spokane on to get tuned this month

chibikougan 04-06-2011 09:28 AM

Nice!! Gonna be a fun drive.

RETed 04-06-2011 01:28 PM

Sorry, but I gotta say this... :(

The build started as a really costly build then turned into a V8 conversion.

I dunno why you went with the cheapie crush bent exhaust system, cause the necked-down bends are just hurting exhaust flow. :(


-Ted

project86 04-06-2011 03:57 PM

Quote:

Originally Posted by RETed (Post 146007)
Sorry, but I gotta say this... :(

The build started as a really costly build then turned into a V8 conversion.

I dunno why you went with the cheapie crush bent exhaust system, cause the necked-down bends are just hurting exhaust flow. :(


-Ted

In Sean's defense... i dont think anyone near us has a mandrel bender.....

josh18_2k 04-06-2011 04:56 PM

in the v8's defense, i doubt it'll make any real difference lol

(until cam anyway)

FC3S Murray 04-06-2011 05:22 PM

Quote:

Originally Posted by RETed (Post 146007)
Sorry, but I gotta say this... :(

The build started as a really costly build then turned into a V8 conversion.

I dunno why you went with the cheapie crush bent exhaust system, cause the necked-down bends are just hurting exhaust flow. :(


-Ted

I know I know but Kyle is right...no manderal bender anywhere. Not to mention the cost of labor I was gonna pay for using cut up peices of manderal bent pipe was gonna be upwards of 780.00(what he qouted me). The bends are not at all too severe, I will take a power hit to save the cash....I am a family man bro, money is very scarce when it comes to this car.

The entire car has been costly over the last 8 years lol, this swap was actually pretty cheap after all the money you rotary guys paid me for my old parts lol:rofl:

Quote:

in the v8's defense, i doubt it'll make any real difference lol


What I have read about a 3% decrease in power


All times are GMT -5. The time now is 08:51 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Hosted by www.GotPlacement.com