Isn't the tack the most important gauge to have directly in front of you?

the tach is in a better position because the steering wheel doesn't blok a piece of the vieuw.
my opinion :)

these are the wheels i have ordered yesterday Asanti Af 164
19" x 9" -6 and 19" x 12" -34

http://i160.photobucket.com/albums/t192/rxv23/af164.jpg

Perhaps I'm just odd, but it's the gauge I check the least. I know what gear I'm in because I'm the one shifting and I know round-about what my speed is, so I more or less know what my RPMs are based upon those two things so I have no real reason to look at it. Couple that with the sound of the engine/exhaust and there's not a huge need to look at the tach.

That said, I have no sensory input (e.g. sound, sight) of fuel/oil pressure, coolant temp, etc. without a gauge.

i was bit bored and took a picture of the dashbord with the lights on :)
http://i160.photobucket.com/albums/t...3/P1010579.jpg

I have that same design in my CAD program, i cold have made you a set SUPER CONCAVE for the same price you paying for flat face option you going with.
http://www.chipsmotorsports.com/forged-wheels That design is not listed on my web site but i do have it :)....

Next time... great build by the way.

Chip U

damn if i had know that ....
but it's to late to cancel they are allready been ordered for a while

making some fiberglas parts to hide the backing of the headlighs

http://users.telenet.be/sammyrx7/ima...1719%29%20.JPG
http://users.telenet.be/sammyrx7/ima...1720%29%20.JPG

The attention to detail is staggering!

making of inner fenders
http://users.telenet.be/sammyrx7/ima...%281723%29.JPG

some parts arrived again :)

http://users.telenet.be/sammyrx7/ima...1732%29%20.JPG

http://users.telenet.be/sammyrx7/ima...1733%29%20.JPG

the first layer of fiberglass
http://users.telenet.be/sammyrx7/ima...1734%29%20.JPG
http://users.telenet.be/sammyrx7/ima...1736%29%20.JPG
http://users.telenet.be/sammyrx7/ima...1737%29%20.JPG

little update again :)

last piece of the dashbord finished and goes open with a touchless sensor i made myself

http://users.telenet.be/sammyrx7/ima...1743%29%20.JPG

she cried for fuel so badly i had to fill her up....

http://users.telenet.be/sammyrx7/ima...1746%29%20.JPG

some further progress of the kit.

http://users.telenet.be/sammyrx7/ima...1752%29%20.JPG
http://users.telenet.be/sammyrx7/ima...1753%29%20.JPG

flip flop to hide licence and have better air flow for the cooling of course :)

http://users.telenet.be/sammyrx7/ima...1754%29%20.JPG

engine ready to start just need the trottle pipe back from the welder

http://users.telenet.be/sammyrx7/ima...1756%29%20.JPG

seats ready for custom carbon fiber backing :)
the side's will be painted in lavagrey
http://users.telenet.be/sammyrx7/ima...%281760%29.JPG
http://users.telenet.be/sammyrx7/ima...%281761%29.JPG

making alu plate for under the engine and reinforcement for the bumper
http://users.telenet.be/sammyrx7/ima...1770%29%20.JPG
and sprayed some pieces with spray filler for the last faults and see the shapes better
http://users.telenet.be/sammyrx7/ima...1772%29%20.JPG
http://users.telenet.be/sammyrx7/ima...1775%29%20.JPG
http://users.telenet.be/sammyrx7/ima...1776%29%20.JPG
http://users.telenet.be/sammyrx7/ima...1781%29%20.JPG
http://users.telenet.be/sammyrx7/ima...1794%29%20.JPG

That aluminum plate for under the car is baller!