Rotary Car Club
Page 21 of 21 « First 11181920 21
Show 40 post(s) from this thread on one page

Rotary Car Club (https://rotarycarclub.com/index.php)
-   Show your rotary car build up. (https://rotarycarclub.com/forumdisplay.php?f=66)
-   -   TitaniumTT's I hope I make it to DGRR '09 Build (https://rotarycarclub.com/showthread.php?t=6995)

need RX7 01-12-2010 05:08 PM
Quote:
Originally Posted by EJayCe996 (Post 106803)
You should have done it as Count von Count from Sesame Street......
:rofl::rofl::rofl:

*awaiting new video with said revisions*

helghast7 01-12-2010 07:30 PM
nice dude, cant wait to see it in the car

djmtsu 01-12-2010 07:48 PM
That vid make me LOL at work today.

TitaniumTT 01-12-2010 08:23 PM
Quote:
Originally Posted by EJayCe996 (Post 106803)
You should have done it as Count von Count from Sesame Street......





:suspect:


btw, where's mine?
If you're serious, I can price some pieces out for you. I know exactely what needs to be done to make it work, and can get prices for everything with the exception of the machine work. I'll be heading down to the shop in the next few days to get some parts turned down.

Only drawback so far is there is no aftermkt short throw that I can find for it..... I may be making one of those too :banghead:

Quote:
Originally Posted by djmtsu (Post 106819)
That vid make me LOL at work today.
:rofl:

EJayCe996 01-12-2010 11:15 PM
Quote:
Originally Posted by TitaniumTT (Post 106824)
If you're serious, I can price some pieces out for you. I know exactely what needs to be done to make it work, and can get prices for everything with the exception of the machine work. I'll be heading down to the shop in the next few days to get some parts turned down.

Only drawback so far is there is no aftermkt short throw that I can find for it..... I may be making one of those too :banghead:



:rofl:
Hell, tax returns are around the corner, why not? :)
I honestly don't have anything better to spend my money on other than that which automatically comes out of my paychecks into a Roth IRA

Force13b 01-15-2010 11:47 AM
Quote:
Originally Posted by TitaniumTT (Post 106824)
If you're serious, I can price some pieces out for you. I know exactely what needs to be done to make it work, and can get prices for everything with the exception of the machine work. I'll be heading down to the shop in the next few days to get some parts turned down.

Only drawback so far is there is no aftermkt short throw that I can find for it..... I may be making one of those too :banghead:
FD version?

TitaniumTT 01-15-2010 12:12 PM
Quote:
Originally Posted by EJayCe996 (Post 106859)
Hell, tax returns are around the corner, why not? :)
I honestly don't have anything better to spend my money on other than that which automatically comes out of my paychecks into a Roth IRA
Alrighty, gimme some time to make sure that this thing is up to snuff, that the needed machining can actually be done, then I'll grab some parts fiches and price some stuff out. ;)

TitaniumTT 01-15-2010 12:15 PM
Quote:
Originally Posted by Force13b (Post 107081)
FD version?
You would need to
change the clutch, maybe the flywheel,
starter
and worst off, modify the PPF as the tailshaft housing is most likely very different.
Speed sensors are another thing to worry about.

Yeah Jay, forgot to mention that, there's no speed sensor on this tranny. You'd need to use an aftermkt speedo with a programable hall effect sensor..........

Me, I got my MoTeC ;)

Force13b 01-15-2010 12:26 PM
Quote:
Originally Posted by TitaniumTT (Post 107085)
You would need to
change the clutch, maybe the flywheel,
starter
and worst off, modify the PPF as the tailshaft housing is most likely very different.
Speed sensors are another thing to worry about.

Yeah Jay, forgot to mention that, there's no speed sensor on this tranny. You'd need to use an aftermkt speedo with a programable hall effect sensor..........

Me, I got my MoTeC ;)
That's a little much for a gear i doubt i need. I think i'll wait to see what you do with your FD, i'm sure you'll come up with something else. I'm sure my haltech could wire into a speed sensor of any kind just take some time to figure it out.

TitaniumTT 01-15-2010 01:37 PM
Mag converter off of an ABS sensor ;)

If the trans works well in the FC, I'll be doing the same thing with the FD. It's not an extra gear, it tightens up all the gears. You do loose some OD though. Im using the RX8 gear set, .84 OD FWIW. I think the ratio's will be spot on though. Especially the 1-2 & 2-3 shift.

Force13b 01-15-2010 02:06 PM
Quote:
Originally Posted by TitaniumTT (Post 107098)
Mag converter off of an ABS sensor ;)

If the trans works well in the FC, I'll be doing the same thing with the FD. It's not an extra gear, it tightens up all the gears. You do loose some OD though. Im using the RX8 gear set, .84 OD FWIW. I think the ratio's will be spot on though. Especially the 1-2 & 2-3 shift.
My trans is jacked. The guy that rebuilt it did a shit job and i spent way to much on it. I'll watch for updats.

EJayCe996 01-16-2010 01:08 AM
Quote:
Originally Posted by TitaniumTT (Post 107085)
You would need to
change the clutch, maybe the flywheel,
starter
and worst off, modify the PPF as the tailshaft housing is most likely very different.
Speed sensors are another thing to worry about.

Yeah Jay, forgot to mention that, there's no speed sensor on this tranny. You'd need to use an aftermkt speedo with a programable hall effect sensor..........

Me, I got my MoTeC ;)
I Gots a Platinum Sport 1000, it is capable :)


All times are GMT -5. The time now is 11:56 AM.
Page 21 of 21 « First 11181920 21
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Hosted by www.GotPlacement.com