Rotary Car Club

Rotary Car Club (https://rotarycarclub.com/index.php)
-   Transmission / Differential (https://rotarycarclub.com/forumdisplay.php?f=164)
-   -   The Rx8 6-Speed into an FB Thread! (https://rotarycarclub.com/showthread.php?t=9552)

TitaniumTT 10-27-2011 07:43 AM

Quote:

Originally Posted by Raksj04 (Post 169500)
I thought the RX-8 trans was not that strong. weaker then the TII

Really, why would you say/think that?

Raksj04 10-27-2011 09:14 AM

When I was talking about swaping in a Rx-8 6-speed in to my FC when I had the N/A engine I was told the trans was weak and the TII trans is better

TitaniumTT 10-27-2011 10:41 AM

You shouldn't believe everything you hear. Did you even ask these people if they have every

1) torn down an RX8 trans
2) ever tear down a TII trans
3) know how or more importantly WHEN the trannies break
4) what other cars those trannies live in?

Raksj04 10-27-2011 11:06 AM

So how much Power or toqure can a stock RX-8 tranny take? Is that tranny used in Grand am racing with the 3 rotor. And no at that time I asked those questions I didnt question them, It was years ago. I know better now.

TitaniumTT 10-27-2011 04:33 PM

No one knows how much torque it can take, it's too weak for anyone to try :rolleyes:

Last time mine was apart it showed no visible wear after being abused at the track behind a 330 ft/lb 8k rpm rotary. It SHOULD be at next weeks PCA DE @ NJMP for 2 days @ ThunderBolt and a day @ Lightning

Grand Am racing generally uses dogboxes or Jericho's or a tranny you can pick your own ratios. This Aisan is none of those, it's a street car tranny, not a race car tranny, there is a big difference

You know what better now?

Raksj04 10-27-2011 04:37 PM

yes I do.

"The more you know. Knowledge is power!"

Thank you. I may rethink swapping one in my FC now, Should get better MPGs. right?

TitaniumTT 10-27-2011 05:01 PM

Nope, you'll get worse because the FD is higher, more RPM's more fuel etc etc.

You can't fit an RX8 6-spd into an FC. The shifter will sit 3.625" farther forward. Where does that put you? In the stereo

Raksj04 10-27-2011 05:59 PM

I could always move the engine back. And there is no such word as can't in engineering or fabrication, too costly or not beneficial do exist.

TitaniumTT 10-27-2011 06:08 PM

Than do it, move the engine back nearly 4 inches.

Post pics too

How much engineering or fabrication experience do you have?

Funny thing is, I've got a tranny based on on RX8 that I'll be installing tomorrow ;)

Whizbang 10-31-2011 04:50 AM

Well a friend in Boise has an FB with an entire FE engine and transmission, seems to all fit rather well. Mounts were custom as was the crossmember. But runs damn good.

Raksj04 10-31-2011 08:11 AM

Quote:

Originally Posted by TitaniumTT (Post 169647)
Than do it, move the engine back nearly 4 inches.

Post pics too

How much engineering or fabrication experience do you have?

Funny thing is, I've got a tranny based on on RX8 that I'll be installing tomorrow ;)

Far less then you. "Can't" is a word I don't like to use, Is it out of my ability to be done in a clean and reliable matter. Yes, well maybe I have never tried nor do I plan to in the near future.

silverfdturbo6port 12-07-2011 05:19 PM

Hmm i wonder if it can handle a 600hp engine?

TitaniumTT 12-07-2011 06:33 PM

Quote:

Originally Posted by Raksj04 (Post 169889)
Far less then you. "Can't" is a word I don't like to use, Is it out of my ability to be done in a clean and reliable matter. Yes, well maybe I have never tried nor do I plan to in the near future.

Than why bother bringing this thread back from the depths?

Quote:

Originally Posted by silverfdturbo6port (Post 174665)
Hmm i wonder if it can handle a 600hp engine?

Put it behind said 600hp engine.
Drop in Car
Strap on Dyno
??????
Report results
PROFIT!!!!!

Whizbang 12-11-2011 10:02 AM

my biggest issue right now is I have no reason to spend the money to do this swap! If my Miata hybrid in the rally car craps, then ill certainly try it out. since money is better now, i might aquire two Rx8 transmission i know of locally from folks. Both have "bad 2nd gear" problems.


All times are GMT -5. The time now is 04:15 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Hosted by www.GotPlacement.com