Rotary Car Club
Page 2 of 3 1 2 3
Show 40 post(s) from this thread on one page

Rotary Car Club (https://rotarycarclub.com/index.php)
-   RX-8 (2004 - Present) (https://rotarycarclub.com/forumdisplay.php?f=63)
-   -   Billet Rx-8 Turbo System (https://rotarycarclub.com/showthread.php?t=10526)

classicauto 03-01-2010 05:25 PM
Quote:
Originally Posted by 1Revvin7 (Post 111316)
We sell them for everything. We are enclosing the entire turbo manifold and downpipe too. We also make them for standard turbine housings...

http://www.turblown.net/store/index.php?productID=62
In that case awesome work. Also awesome work on those LIM blanket/shields. Excellent product idea!

Keeping my eye on this build :)

1Revvin7 04-01-2010 07:53 PM
1 Attachment(s)
:)

pdxhak 04-07-2010 10:52 PM
Quote:
Originally Posted by 1Revvin7 (Post 110919)
The owner is looking for at least 500rwhp, maybe even 600 now..

Going to be pushing things!
Is there more to the build then just the turbo? That is a lot of WHP for a Renesis. What type of management? Cooling? Meth?

1Revvin7 04-12-2010 05:25 PM
1 Attachment(s)
Quote:
Originally Posted by pdxhak (Post 115034)
Is there more to the build then just the turbo? That is a lot of WHP for a Renesis. What type of management? Cooling? Meth?
It will be running meth injection. The engine has our stud kit, and will have a few of our coatings. In addition it is ported, doweled, and some prototype apex seals.

1Revvin7 05-05-2010 04:58 PM
1 Attachment(s)
Dp shield done..

1Revvin7 08-27-2010 05:48 PM
1 Attachment(s)
Another one we just finished, this one was done in house...
So far is builds boost as fast as the old greddy unit, and should be capable of 400rwhp :icon_tup:

meca 08-27-2010 09:28 PM
Very nice work indeed! What Ecu will be used? BTW 1.5mm Apex seals?

1Revvin7 09-09-2010 01:50 PM
1 Attachment(s)
ECU is Adaptronic e420c (piggyback) EMS (MAP based).
Standard Rx-8 dimensions on the seals

1Revvin7 12-04-2010 08:42 PM
Another one has been completed, should start tuning shortly...

http://www.youtube.com/watch?v=XGHVJLA6fWI

1Revvin7 12-24-2010 01:22 AM
Incomplete baseline tune @ 11psi with 60 percent throttle vs stock power...http://sphotos.ak.fbcdn.net/hphotos-..._5229453_n.jpg

http://sphotos.ak.fbcdn.net/hphotos-..._1609518_n.jpg

SayNoToPistons 12-24-2010 07:23 PM
Loving the new FI developments you guys are providing for the RX-8.

diabolical1 12-27-2010 09:30 PM
nice work, Elliot.

Nutsid 01-04-2011 10:39 PM
I'm glad people are still pushing the Renesis. I highly doubt I'll ever go with a FI Renesis myself until it proves to be reliable in doing so, but it is good to see people still pushing the capabilities. :icon_tup:

1Revvin7 01-04-2011 11:00 PM
Quote:
Originally Posted by Nutsid (Post 136632)
I'm glad people are still pushing the Renesis. I highly doubt I'll ever go with a FI Renesis myself until it proves to be reliable in doing so, but it is good to see people still pushing the capabilities. :icon_tup:
We made over 30+ WOT 4th gear pulls on monday with the car. I am pretty confident the setup is reliable.

Nutsid 01-04-2011 11:05 PM
Quote:
Originally Posted by 1Revvin7 (Post 136637)
We made over 30+ WOT 4th gear pulls on monday with the car. I am pretty confident the setup is reliable.
Not to downplay the impressive work you're doing by any means, but 30+ WOT pulls in fourth gear isn't that much compared to years of abuse and track time abuse.


All times are GMT -5. The time now is 05:28 PM.
Page 2 of 3 1 2 3
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Hosted by www.GotPlacement.com