Rotary Car Club - February RHD Rotary Nominations

Rotary Car Club (https://rotarycarclub.com/index.php)

- Rotary Of The Month Contest (https://rotarycarclub.com/forumdisplay.php?f=125)

- - February RHD Rotary Nominations (https://rotarycarclub.com/showthread.php?t=10365)

We have some really great cars here! Its going to be tough!

What made you do the 626 build out of curiosity?

Crap, that Bertone is friggin' sweet too.

OK, so the Bertone Luce wins the RHD competition, and the 626 wins the Rotary Conversion competition (when we have one, I already declare it the winner).

Madaz your Luce is sublime....it easily follows the 626! :bowdown: Have seen it pop up on Ausrotary...absolutely mint condition! :icon_tup:

An RX87 is quite high on my wish list! Would make a nice stable mate for my L10B.

Cheers,
Danny

Thanks Danny, :) an L10 is the ultimate rotary in my opinion. High on my wish list also.
Have you entered it into the ROTMC before?
You have a nice collection of rotaries. :icon_tup:
regards
Sean

For those who dont no much about Mazda's 13A here is some brief info. It was produced exclusively for the Luce. As you can see in the pics the rotor housings share the same size as the 12A at 60mm.
The 0.655x2=1310 capacity is achieved by way of "stroke" as the rotors have a radius of 120mm and an eccentric shaft offset of 17.5mm compared to 10A/12A/13B which all have a rotor radius of 105mm and eccentric shaft offset of 15mm.

http://img29.imageshack.us/img29/9438/pc180002.jpg

http://img682.imageshack.us/img682/9810/p2120355.jpg

Short vid of my PP idling :driving:
http://video.google.com/videoplay?do...8111459&hl=en#

^love that car :icon_tup:

Quote:

Originally Posted by Madaz (Post 109683)

For those who dont no much about Mazda's 13A here is some brief info. It was produced exclusively for the Luce. As you can see in the pics the rotor housings share the same size as the 12A at 60mm.
The 0.655x2=1310 capacity is achieved by way of "stroke" as the rotors have a radius of 120mm and an eccentric shaft offset of 17.5mm compared to 10A/12A/13B which all have a rotor radius of 105mm and eccentric shaft offset of 15mm.

http://img29.imageshack.us/img29/9438/pc180002.jpg

http://img682.imageshack.us/img682/9810/p2120355.jpg

Isn't the new 16X rotary engine designed using the 13A housings?

Holly

Quote:

Originally Posted by ROTORX7Holly (Post 109963)

Isn't the new 16X rotary engine designed using the 13A housings?

Holly

No, they are a completely new engine. Rotors and housing are bigger in width and height, it also uses direct injection

Last call for nominations, This will close this and begin voting at midnight!

Last minute entry. :)

Vehicle: Mazda FD3s
Year: 2000
Engine: Mazda RX-7 Streetported 13BREW
Turbo: Garrett GT35r T3/.82 AR Exhaust housing
Gearbox: Stock 5 speed transmission
Differential: I was told it was a Mazdaspeed 1.5 way. Now I am finding that Mazdaspeed didn't make a 1.5 way so.. Who knows?
Brakes: BF Goodrich Stainless Steel Lines, Brembo Front/Stoptech Rear Slotted rotors
Brake Pads: EBC Yellowstuff
Wheels: 2000 FD3s Type RZ BBS 17x8 and 17x8.5
Tires Front: 245/45/17 Dunlop Direzza Z1 Starspecs
Tires Rear: 255/40/17 Potenza RE01-R
Exhaust: 3 inch custom downpipe to Borla submuffler/midpipe w/ Racing beat dual catback.
Engine Management: Power FC -- Tuning will be done via Techedge Wideband and FC Datalogit.
EFI Fuel Pump: Walbro 255
Boost Controller: Hallman Pro Manual
Intercooler: Custom V-mount Greddy coupled with a Koyo Aluminum.

Exterior
http://farm4.static.flickr.com/3290/...a2b20967_b.jpg
http://farm4.static.flickr.com/3152/...007b7616_b.jpg
http://farm4.static.flickr.com/3011/...28d2a509_b.jpg
http://farm4.static.flickr.com/3143/...ffea528a_b.jpg

Interior -- (My Camera Sucks!)
http://farm5.static.flickr.com/4009/...aa602816_b.jpg
http://farm5.static.flickr.com/4072/...a26a0f4f_b.jpg
http://farm3.static.flickr.com/2794/...eb7d104b_b.jpg

Engine Bay -- (Yep.. Still Sucks!)
http://farm5.static.flickr.com/4070/...97400098_b.jpg
http://farm3.static.flickr.com/2737/...3c8ecb53_b.jpg
http://farm5.static.flickr.com/4014/...60cd5b1d_b.jpg
http://farm5.static.flickr.com/4006/...ca5f05da_b.jpg
http://farm3.static.flickr.com/2708/...878cdef0_b.jpg
http://farm5.static.flickr.com/4023/...9b7f2e5b_b.jpg

I just posted the build thread. The link to it is here.
http://rotarycarclub.com/rotary_foru...001#post110001

Haha. Thanks Frank. By far, my car is not the nicest of the bunch.

Good news! nominations will be open until I create a new voting thread this evening!
Nominate now!

Dannys car has some very nice little engineering touchs.