mung it

Could you explain what comes in your kit? Bracket, hardware, etc. etc.

4 x COP adaptors
(each one of these has a cover plate, internal contact buttons, and a spring, O-ring seals)
2 x Coil spacer/mounts
(FRONT and a REAR mount)
1 x Engine bracket/mount
(mounts off center plate)
Fasteners for the mounts x 3 and for the COP cover plates x 16
(all fasteners required to complete assembly)
Instruction sheet, with CAD pictures of fitment, and instructions
(Detail on assembly and trim needed to trailing coil tab and how to do that with step by step pictorial illustrations.)

Email sent. I'm in for a set of just the COP adapters.

Peter,

Are those prices including shipping?

For those who are having difficulty navigating Peters site, his email is: peter@riceracing.com.au

out of the goodness of my heart :18: yes shipped, to sweeten deal :tongue1:

:kiss:

I'm assuming the prices for the other versions will be around $995 also, is that correct? I'm still waiting to hear back from my buddy. He did the measurements but lost the paper he wrote them on lol.

The M&W version should be a little less as there will be no complex COP Adaptor innvolved (but this will be offset buy expense of buying CDI boxes obviously.

The 'ghetto' version I will not make since price of the CNC machined one is pretty good. Horizontal will not have enough demand so its on the back burner as well, as its a small market, that the vertical will cover anyway.

Showing stress/deflection analysis which helped me determine design of last lot of parts (M&W version) this load is 'like' hanging an engine rotor off this part! :lol: (5 times more load than it will see in reality)

http://i.imgur.com/VKNwmiT.jpg

Less than a month from now........... pending demand from here. :willy_nilly:

See first page, 'ghetto' will be eliminated since the cost benefit does not warrant the ghettoness of the end product.

Just CNC version in vertical is being made.

Email sent.

Just to give people some idea of the completeness of the designs, here is me addressing one 'interference issue' on the M&W set up, multiple sections everywhere to check all kinds of things....... good luck to anyone who wants to copy it LOL.

Shit is what I would class 99.9% perfect now across all offerings.

http://i.imgur.com/F2WchPz.jpg

This little bloke *Habib* helps with the long hours of sanity testing tedious validations !

http://i.imgur.com/s1280o3.jpg

NOTE: all coils are fully supported on the 'shoulder' thus one bolt mounting method suffices... is rock solid across both systems (IGN-1A and M&W) they cant rotate anywhere and are super secure too ;)
(the odd shaped 'red bits' around the bolt holes are the threads cut in a plane, not out of round holes haha)

http://i.imgur.com/NziEjc9.jpg

Finalized the horizontal IGN-1A version (for those with race car set up) or who want to move stuff around to get this to fit.
http://i.imgur.com/IMYj8sE.jpg