1993+ Rx7, Aluminum Oil Filler, ReSpeed [Archive]

bwaits

05-31-2009, 10:20 AM

Special GB price for the next batch of our FD oil fillers.

We need 5 to move forward. Once you complete your purchase please come back and update this thread with your name.

This is the link to the catalog item. -> http://mrcmfg.com/catalog/index.php?cPath=93

-billy

RX7ist

06-04-2009, 03:05 PM

paid

Melon350

06-08-2009, 08:46 AM

Would we be able to order with a -10 port welded in?

Brent

06-08-2009, 10:50 AM

Very nice product! I have their oil filler and oil pedestal on my car.

bwaits

06-09-2009, 10:51 AM

Would we be able to order with a -10 port welded in?

-10 port? This GB is for our filler, we already have the pedestals with -10 port.

-10 seems big for anything on the filler?

-billy

RIZZXX7

06-10-2009, 11:16 PM

will this work with xcessive LIM?

bwaits

06-11-2009, 08:11 AM

will this work with xcessive LIM?

Yes they will.

-billy

RIZZXX7

06-11-2009, 12:37 PM

these won't be made until we get 5?

bwaits

06-13-2009, 09:11 AM

We will need to see how it goes. We had a few that requested this GB that have not responded yet.

-billy

imstillonjava

06-13-2009, 05:01 PM

Order completed under the name: Carol Mak, email: jrsch22a@yahoo.com

thank you!

Charlie Redden

06-21-2009, 11:13 AM

Just ordered one. Same name as my avatar.

thanks,

Charlie

Melon350

06-22-2009, 06:58 PM

I was thinking some kind of a port to run to a catch can, I would think a -8 or -10 would be good. The little vacuum barbs seem kind of small?

bwaits

06-23-2009, 09:46 AM

I was thinking some kind of a port to run to a catch can, I would think a -8 or -10 would be good. The little vacuum barbs seem kind of small?

They are barbed the factory size. The internal baffle is going to catch 99% of the "slosh". I have seen many plumb this to a catch can with the barbs.

Sorry, we can leave the part bare for you if you would like to have your own fitting welded on though.

-billy

Charlie Redden

07-05-2009, 09:48 PM

Are we at 5 yet???

joff

07-06-2009, 12:01 AM

Are we at 5 yet???

Well I just decided to order. My name is Jesse Off.

RIZZXX7

07-06-2009, 06:03 AM

just ordered also, name is Silvius Barrientos

bwaits

07-06-2009, 06:57 AM

Build has been started. Should be ready within a few weeks. Thanks guys.

-billy

Charlie Redden

07-22-2009, 09:06 PM

Two week update???

RIZZXX7

07-22-2009, 09:23 PM

+1^

bwaits

07-24-2009, 10:48 AM

Yes, all parts are manufactured. We are in the fabrication stage. Will have an update next week on ship dates.

-billy

speedjunkie

07-26-2009, 09:27 PM

I need one of these ASAP. Is this GB still on? Is the price currently listed on the website ($139.99) the GB price or do I need to enter a discount code? I'm just going to order anyway.

EDIT: Ordered

Charlie Redden

08-03-2009, 11:08 PM

Update???

speedjunkie

08-10-2009, 09:59 AM

Any updates?

bwaits

08-10-2009, 03:52 PM

Fabrication is complete and the PC units are cooling off.

Starting to box them up now.

Thanks for all the orders.

-billy

joff

08-14-2009, 08:58 PM

Just got mine today, looks good!

Looks like theres still some loose metal shavings those NPT threads so be sure to clean them good before installing lest you get them in your oil.

bwaits

08-15-2009, 09:22 AM

We wash each one just before packaging so they should be clean. You should still wash the items out just to be sure.

-billy

speedjunkie

08-16-2009, 03:01 AM

Got mine today too. Looks great! Thanks!

imstillonjava

08-16-2009, 04:14 AM

received mine also. thanks!

Charlie Redden

08-16-2009, 11:50 AM

Received mine as well. Looks good!

bwaits

10-17-2009, 08:31 AM

Have a few pms about these. Anyone interested in another group buy? We will also put up the soon to be released TII fillers if enough interest.

-billy

Rx7aholic

10-17-2009, 08:28 PM

I be intresting in one, I been looking at your site and can't find it any where.
Khris

fjdrx7

10-25-2009, 08:05 AM

Count me in for one, need paypal info

fjdrx7

10-25-2009, 08:11 AM

We need 4 more for the next batch, anyone????

1-FJDRX7 (1ea)
2-
3-
4-
5-

puz pounda

10-27-2009, 07:15 PM

I'm intrested in one. I read somewhere on this thread their $140? is that correct? need paypal info

therighthand

10-28-2009, 11:16 PM

We need 4 more for the next batch, anyone????

1-FJDRX7 (1ea)
2-therighthand aka dradon03 on the "other" forum
3-
4-
5-

I want in on one of these if possible.

Monkman33

10-29-2009, 12:23 AM

Not trying to be too picky, but are you guys going to make sure that this run fits perfectly with the xcessive lim? And also to make sure that the inside of the unit is properly cleaned?

bwaits

10-29-2009, 11:32 AM

Not trying to be too picky, but are you guys going to make sure that this run fits perfectly with the xcessive lim? And also to make sure that the inside of the unit is properly cleaned?

Parts are jig welded. They have always been built on the same jig. We have never had reports that they do not work with the xcessive manifold.

-billy

fjdrx7

10-29-2009, 09:37 PM

3 or two more, come on guys, i'm done with my build and need this item to mount my coils the way i need them

puz pounda

10-30-2009, 07:13 PM

i'm in!!!

fjdrx7

10-30-2009, 08:21 PM

one more

fjdrx7

11-01-2009, 06:18 PM

One more...

1-fjdrx7 (1ea)
2-therighthand aka dradon03 on the "other" forum
3-Rx7aholic
4-puz pounda
5-

fjdrx7

11-04-2009, 07:31 PM

come-on one more, almost finish with my project here!!!!!

ehron

11-05-2009, 02:53 PM

The link is broken. How can we order one?

fjdrx7

11-05-2009, 03:51 PM

get your name on the list

fjdrx7

11-05-2009, 03:52 PM

Billy

we got 5.... we need the paypal address for payment, thanks

bwaits

11-06-2009, 04:17 PM

Link is back up:

http://mrcmfg.com/catalog/index.php?cPath=93

Once you place the order come back here and post that you made the purchase. I will post here once we reach the 5 needed to start.

Thank you,
-billy

puz pounda

11-07-2009, 12:42 PM

I was the first to pay whooo hooo.

1) puzpounda / Paul Mendes

fjdrx7

11-07-2009, 04:56 PM

I was the second (LOL)

1) puzpounda / Paul Mendes
2) fjdrx7 / F. Declet

fjdrx7

11-09-2009, 10:16 PM

lets go and pay guys, i need this soon

Rx7aholic

11-10-2009, 06:29 PM

Hey I just submit my order I also pick the polished coated filler. (Rx7Aholic_Khris Singh)
Thanks

TheRxForSpeed

11-11-2009, 11:48 AM

1) puzpounda / Paul Mendes
2) fjdrx7 / F. Declet
3) TheRxForSpeed / M. Kelly

fjdrx7

11-11-2009, 08:25 PM

One more to pay :driving:

1) puzpounda / Paul Mendes
2) fjdrx7 / F. Declet
3) TheRxForSpeed / M. Kelly
4) Rx7Aholic / Khris Singh (polished coated)
5)

Mspeed

11-12-2009, 07:14 PM

Ordered and paid #5 :-)

fjdrx7

11-12-2009, 09:40 PM

Great that's 5, anyone more now is the time before they close the group buy

bwaits

11-12-2009, 10:27 PM

Thanks guys!

We started the build late last week. Parts will be ready in a few weeks.

-billy

TheRxForSpeed

11-13-2009, 09:29 AM

:driving::cheers2:

fjdrx7

11-19-2009, 07:34 AM

updates :)

bwaits

11-22-2009, 08:38 AM

Still in the build stage. Will let you know where we are at the end of the week. The holiday may delay us a bit.

-billy

fjdrx7

11-25-2009, 06:26 PM

Thanks Brother and Happy Holidays

fjdrx7

12-02-2009, 06:58 PM

updates, LOL

bwaits

12-04-2009, 08:17 AM

Very deep into the build stage. Should be cleaned and ready to ship late next week.

-billy

bwaits

12-10-2009, 12:41 PM

95% fab work is complete. Starting to do final machining and clean up. Will start shipping early to mid next week.

-billy

fjdrx7

12-10-2009, 05:45 PM

nice

puz pounda

12-10-2009, 11:17 PM

shipping out soon??:)

Rx7aholic

12-13-2009, 08:38 PM

TheRxForSpeed

12-14-2009, 10:12 AM

bwaits

12-14-2009, 04:14 PM

Hey Re Speed I definitely need an update on this part? The main is because I was broswing on Ebay and I found this item 270497470520 (1993+ Mazda Rx7 Aluminum Oil Filler, FD, ReSpeed) for $169? I thought u guy's are still in the process of making this part? It seem that it's already made, if u have info please posted it, because I have not received my part yet.
Khris

Khris, I have posted updates weekly to keep you up to date. These have been batch built rather than in stock for a year now. You can check back in this thread and see we have run this GB 3 times now and it always takes 4 weeks or so. We ALWAYS deliver the product.

This GB did not sell the amount that the last one did so we through 3 of them up on ebay.

Monday update: 100% Fab work completed and in the process of final machining and clean up.

-billt

Rx7aholic

12-14-2009, 09:41 PM

Thanks for pointing that small detail on ebay, and Bwaits sorry about I guess I jump to guns since we been waiting for quite some time.
Khris

bwaits

12-17-2009, 10:52 AM

Parts will start shipping out today!

Thanks again guys!

-billy

fjdrx7

12-17-2009, 12:30 PM

great, now i will be finish, pics after the install, thanks

bwaits

12-18-2009, 08:48 AM

All parts have shipped. Thank you, -billy

fjdrx7

12-23-2009, 03:47 PM

Got mine today, WOW my friends i didnt expected to be that nice, but kudows to you Billy, thanks

puz pounda

12-23-2009, 03:59 PM

i got mine a couple of days ago high quality really nice piece!:driving:

fjdrx7

12-28-2009, 09:31 PM

Perfect, here is a pic after i polished

http://i56.photobucket.com/albums/g188/fjdrx7/OFN.jpg

prrex4ever

12-30-2009, 09:55 PM

Perfect, here is a pic after i polished

http://i56.photobucket.com/albums/g188/fjdrx7/OFN.jpg Looking good Fran, won't be long now.:icon_tup: