short shifter blowout check it out!!

[730RWHP12A]

i just did a run of short shifters so i thought i would throw a deal up on rcc. these are new made in the usa for the fb trannys as well as the fc trannys. all bushings and boot seals are OEM mazda to insure quality.
im looking for $170 shipped
pics comming shortly!

[730RWHP12A]

all shifter assemblies are pre lubed and pre assembled before shipping. they also come with mounting hardware. installation should take 10 minutes max.
these shifters will reduce shift throw by 60%!

[Whizbang]

i had one of a similar design and it made getting into reverse a two handed operation. Are these going to have the same issue?

[730RWHP12A]

i had one of a similar design and it made getting into reverse a two handed operation. Are these going to have the same issue?

it takes a little more effort than stock(definatly not a two handed operation!) but thats a good thing. no more 3rd gear to reverse instead of fourth mis-shifts :) what brand is yours?

[Whizbang]

i have absolutely not idea what brand. Came in the vert i bought.

First things first i need to get my FB moving, then im sure ill be looking into this.

[vex]

do they reduce the height as well? Or do they stay the same height as stock but reduce the throw distance?

[730RWHP12A]

do they reduce the height as well? Or do they stay the same height as stock but reduce the throw distance?

the height is about the same as stock the throw is reduced

[730RWHP12A]

ttt

[misterstyx69]

BUMP.GOOD product here guys!
I notice that these shifters Do not have the Bushing on the Small ball that goes into the Shifter's Transmission block.THIS IS a GOOD thing!!!!..No more Crap wearing out after 2 months with Tiny little bushings you have to Sand to FIT.
I have a C's shifter.,I think,I bought from Japan,and it is the Same design as this Shifter.it is Very Good to Shift,and has NO slop.
I hope that people will See that your Product is actually a good design and Buy them up!!.(Hell!, IF I wouldn't have got stuck in my TII project,I would have gotten an S5,and IT needs a shifter!).Good Luck Robert.Dave.

[Drama]

I didn`t see were to pay, Whats the Paypal address. If your not out, I`ll get one in 3 weeks.

[rx7mechusa]

Also interested in picking one of these up Send paypal info in a pm plz

[730RWHP12A]

just an update, i have another run of short shifters ready to go..
speacial pricing for the rcc members!!!

$160.00 shipped

my paypal address is robert@rotaryshack.com

when sending payments please include your user name in the notes so i can pm you your tracking #. thanks

[infernosg]

Curious if you still have any of these for the FC in stock?

EDIT: What's the thread/pitch on these anyway?

[TitaniumTT]

hmmmmm, If I were to give you the diameter for the ball, would you be able to turn out a kinda custom one for me? The ONLY difference is in the bottom ball.

[730RWHP12A]

hmmmmm, If I were to give you the diameter for the ball, would you be able to turn out a kinda custom one for me? The ONLY difference is in the bottom ball.

definatly

[TitaniumTT]

You rock.

That is all


Except I'll get you some measurements soon.

Thanks much!

[infernosg]

N00b mistake by me. S5 thread/pitch is M10x1.25, not M12x1.25 (S4 is M12x1.5). The shifters he sells is M12x1.5 so don't think re-threading the pitch to 1.25 will make this work with S5 shift knobs :banghead:

[Phoenix7]

I paid $150 for my used short shifter and it didn't come with ANY of the stuff mentioned. Buy this while it's available, once you go short-shifter you can't go back and for $160 it's a great deal.

[Gregory Casimir]

how many do you have left my good sir?

[730RWHP12A]

N00b mistake by me. S5 thread/pitch is M10x1.25, not M12x1.25 (S4 is M12x1.5). The shifters he sells is M12x1.5 so don't think re-threading the pitch to 1.25 will make this work with S5 shift knobs :banghead:

easy fix, send it back and ill re-thread it to a 10x1.25 for free and ill cover the shipping :)

[730RWHP12A]

how many do you have left my good sir?

about 20~25

[730RWHP12A]

down to 10