2/21 Pelham, AL meet???

[jtbshaw]

Short notice, I know. Anyone interested in gathering here at the shop? I can foot the bill for some food and drinks....as long as it isn't a huge turnout. Usually only 10-15 ever show, and Kevin and Phil are usually the only FD owners that drive their FDs to the meets :001_005: . Please advise if you would like to come. I'm thinking gather around 11am, I'll cook on the grill, and you all can hang out and check out the place and see what we are all about.

Let me know if you want to come. Based on the response I get, I will advise everyone on Friday if this will be a go!

Todd B.
Pres.
No Limit Industries.
981 Dow Street
Pelham, AL 35124
205.259.3145

[rx7 FC TII]

i will be there. let me know if you want me to bring anything. and of course ill be in the FC

[Dzire]

+1

[SPICcnmFD]

I'll try to come but that depends on what I get done on my car the rest of the week. I really want to get it running this weekend.

[Herblenny]

I'll be there!... in my 8 as my MB FD is still in need of rotors.

[ZGN]

I'll come by but still have not replaced my throughout bearing in the 7 so I might not be driving it. Maybe I'll drive it anyway. I have mad skills with no clutch driving.


-Kevin

[staticpat]

If I am in town I plan on attending this fine event. I will drive my FD because it is my only running car :<

[Herblenny]

Also, Don't forget to sign up for DGRR 2009 :)

[somchhir1]

i'll try and make it....what time?

[Herblenny]

Someone also post it on RX7club and RX8club :)

[VinnyV81]

Hey everyone, I was invited by staticpat on the alscca forums. I will be there in my FC. Looking forward to meeting everyone. No local rotary guys around here in T-town.

-V

[SPICcnmFD]

Well if there is everyone is coming then I'll do my best to be there. I can just get the car running next week.

[Herblenny]

Chris,

Can you help me bring my RX3 down?? If you don't drive your FD??

[staticpat]

Someone also post it on RX7club and RX8club :)

I soiled my soul, but I started a thread on 7club for you guys.

[jtbshaw]

i'll try and make it....what time?

Right now, it is set for 11am until about 2pm.

I'd rather see that 1098 rather than your FD though! :001_005:

[jtbshaw]

As it stands now, I have the following people that are planning on attending:

1. Marshall
2. Hobby
3. Chris
4. Phil
5. Kevin
6. Pat
7. somchhir1
8. Vinny
9. Roy

There are only a few more from a few other forums. Please advise if you are not going to attend as I need to plan for the food and drinks.

Todd B.

[Red Dragon]

I plan on attending if I can find the new shop. I haven't been out that way since you guys moved.

[jtbshaw]

I plan on attending if I can find the new shop. I haven't been out that way since you guys moved.

Roy??? (nm: I just read your sig)

The new shop is about 2 miles north of our old location, off of Hwy. 33 that runs behind Home Depot.

[Red Dragon]

Roy??? (nm: I just read your sig)

The new shop is about 2 miles north of our old location, off of Hwy. 33 that runs behind Home Depot.

Yeah I'm still around Todd, lol. Been a little busy with work.

[jtbshaw]

You gonna be in the FC for Saturday?

[Red Dragon]

Yeah my little rust bucket will be making an appearance.

[somchhir1]

Right now, it is set for 11am until about 2pm.

I'd rather see that 1098 rather than your FD though! :001_005:too cold right now...but here's a pic

[jtbshaw]

too cold right now...but here's a pic

That's a nice bike...I bet those Termis sound off!!! I really miss my 916 that I built (bought it banged up and busted, and completely turned it around to show quality).

[somchhir1]

That's a nice bike...I bet those Termis sound off!!! I really miss my 916 that I built (bought it banged up and busted, and completely turned it around to show quality).

the growl on them isn't like any bike i've heard before......

[jtbshaw]

Ok, looks like it is a go for tomorrow folks. We have at least 10 that have said they will be here, but possibly as many as 15...we'll see.

I will grill burgers and dogs (maybe even some deer sausage) and supply some drinks. I don't mind if you drink alcohol, just be reasonable with it and don't act a fool up in here or you will be asked to leave.
***ALSO*** Please take it easy coming down our street. Our neighbors are pissy about the noise we make, plus they have some small kids they let run all around.

If you need help finding the place, call me and I will direct you here. Easiest way to tell you: Take exit 242 off I65 South-bound, go right at the top of the exit, go approx. 1/4 mile and take right at first light (hwy. 33 - behind Home Depot), once on hwy. 33 go 1.2 miles and turn right onto Dow Street, at the bottom of the hill turn into the commercial area and we are the last building.

Looking forward to seeing everyone and catching up with some old friends.

Todd B.
No Limit Industries
981 Dow Street
Pelham, AL 35124
205.259.3145

[Herblenny]

Todd, What I'm bringing might be quite LOUD!!! I'll be quiet as I can.

Also, Luis is coming with me.

[staticpat]

Most of the people who visit his shop have loud ass cars. I think he's used to it.

[Herblenny]

Oh no.... The one I'm bringing tomorrow is especially loud.. If I get it running :)

[rx7 FC TII]

glad to hear its gonna happen. ill be there. i might show up a lil early if you need some help setting up or anything.

[jtbshaw]

glad to hear its gonna happen. ill be there. i might show up a lil early if you need some help setting up or anything.

I'll be there around 10:30am or before to setup the few tables and the chairs, grill, drinks, etc... Come on over if you would like.

[jtbshaw]

Oh no.... The one I'm bringing tomorrow is especially loud.. If I get it running :)

I think Pat's car is probably louder...but then again, it doesn't run so I guess yours will be louder. Just messin' with you Pat. :cheers2:

[jtbshaw]

EDITED:

Everyone, please take note of #2 (Hobby = Dzire) and give him a :sifone:. His wife is still in the hospital and he's home with the baby and his other daughter. Let me know if I can help with anything Hobby!!! We'll get together soon!

As it stands now, I have the following people that are planning on attending:

1. Marshall
2. Hobby - can't make it cause his wife just had their 2nd baby! :party:
3. Chris
4. Phil
5. Kevin
6. Pat
7. somchhir1
8. Vinny
9. Roy
10. Luis

There are only a few more from a few other forums. Please advise if you are not going to attend as I need to plan for the food and drinks.

Todd B.

[jtbshaw]

.....
Also, Luis is coming with me.

...and bringing that front bumper????

[ZGN]

Thanks for the Grub. Here is some photos of the meet and meat!
http://www.rotarycarclub.com/rotary_forum/album.php?u=2

[somchhir1]

Thanks Todd for having us over today. Appreciate the meal and the chance to meet u guys.

Ryan

[jtbshaw]

Thanks for coming everyone! Glad to see some old friends, glad to meet some new faces. Good times today!

[Herblenny]

Thanks Todd for some great meals!!

And great meeting some new rotorheads in Bham/Alabama area!

[Anthony@NoLimitIndustries]

lots of fun and some good eatin. Sorry i had to make every one look at the busted up benz lol. :biggthumpup::biggthumpup:

[Red Dragon]

Thanks for the awesome food Todd

[Herblenny]

Anthony, Can't wait til your project is done.

Red Dragon, Sorry I didn't get to really talk to you at the shop.. I'm sure there will be more gathering in the future!

[Red Dragon]

Ah its cool dude. Next time PLEASE drive the fd!

[Herblenny]

Ah its cool dude. Next time PLEASE drive the fd!

Will Do.. It was down because brake rotors were off.. I should get that next weekend.

[SPICcnmFD]

Thanks for hosting this. Had a great time.

And for you doubters I did get the FD running yesterday!!!! Woohoo!!! And having to drive it slow sucks!!

[Herblenny]

Chris, Thats a great news! I can't wait to ride in it :)