Xcessive Lower , oil pans etc Group Buy

[glenrx7]

Ok, so lots of people are looking for a group buy. I will run one however we are going to run this a little different than normal group buys.

One, we need to have every body on board and listed with in one week, if we do not have ten people per item we will close it for another week and then reopen if we get ten people.

Two, once list is set we will go to the foundry to have the product cast, so you will not get a product shipped for aprox. one week.

So lets get the list started. List your name and forum name and what product you would like and if you are 100% or not.

Thanks
AZRR

[glenrx7]

Prices for the XM lower and oil pan are as follows:

Lower Intake 480.00 + shipping

Oil Pan 395.00 + shipping

This is going to be for 5+ people, if we get to ten We will drop the price a bit.

Thanks

AZRR

[MotoTek]

Lower Intake:
1. mototek (non-polished)
2.
3.
4.
5.

Oil Pan:
1. mototek (black powdercoat)
2.
3.
4.
5.


CJ-Rails group buy price? I don't need any finish on it.
I'm in the process of selling my polished GZ LIM, decided not to do the polished theme, but paid $150 to have it done. :(

[joff]

Lower Intake:
1. mototek (non-polished)
2. joff (non-polished)
3.
4.
5.

Oil Pan:
1. mototek (black powdercoat)
2.
3.
4.
5.

[AzEKnightz]

Lower Intake:
1. mototek (non-polished)
2. joff (non-polished)
3. AzEKnightz (non-polished) 100%
4.
5.

Oil Pan:
1. mototek (black powdercoat)
2.
3.
4.
5.

[MotoTek]

I think we might get 1-2 more on this forum, are you guys planning on advertising this gb elsewhere? Wish we didn't have to, but ya know....

[Phoenix7]

See AZRR for other GBs (http://rotarycarclub.com/rotary_forum/forumdisplay.php?f=93)

[Phoenix7]

GB is open!

[AzEKnightz]

not much people seem to be interested over here in RCC...

[marco]

there was a few people on a UK forum that were interested- do you want me to spread the word?

[AzEKnightz]

marco, please spread the word if you can. I tried spreading the word on "the other forum" and does not seem like it is working. Those admins over there are watching every for sale thread before it is being posted >.<

[speedjunkie]

I know someone looking for the LIM and I pointed him in this direction. And I want to get one but I wasn't planning on getting one any time soon. I might have to change my plans though.

Bump.

[MotoTek]

I no longer need the LIM, just the oil pan. :icon_tup: Not in any hurry.

[Et3rNaL]

Lower Intake:
1. mototek (non-polished)
2. joff (non-polished)
3. AzEKnightz (non-polished) 100%
4. Et3rNaL (non-polished)
5.

Oil Pan:
1. mototek (black powdercoat)
2.
3.
4.
5.


*refered by speedjunkie

[speedjunkie]

Posting it on Myspace RX7owners club and our local Colorado forum. What is the paypal address?

[Mirage]

Et3rNaL is on a distinguished road

Default
Lower Intake:
1. mototek (non-polished)
2. joff (non-polished)
3. AzEKnightz (non-polished) 100%
4. Et3rNaL (non-polished)
5. Mirage (is it possible to get it polished haha)

Oil Pan:
1. mototek (black powdercoat)
2.
3.
4.
5.

[MotoTek]

Lower Intake:
1.
2. joff (non-polished)
3. AzEKnightz (non-polished) 100%
4. Et3rNaL (non-polished)
5. Mirage (is it possible to get it polished haha)

Oil Pan:
1. mototek (black powdercoat)
2.
3.
4.
5.

[speedjunkie]

Et3rNaL is on a distinguished road



Huh? LOL

I'm glad to see he got on board though. He might be forcing me to buy earlier than planned now haha.

[Mirage]

I have NO idea where the eff that came from??

[speedjunkie]

^LOL

Were you drunk perhaps? LOL

That might go down as a mystery in this thread haha.

[Atkins Dan]

Lower Intake:
1.
2. joff (non-polished)
3. AzEKnightz (non-polished) 100%
4. Et3rNaL (non-polished)
5. Mirage (is it possible to get it polished haha)

Oil Pan:
1. mototek (black powdercoat)
2. Atkins Dan {QTY2}
3.
4.
5.

[glenrx7]

Ok boys and girls ...I am going to get this going. I am going to start this monday next week I will post the prices then I think we can get some good pricing ....

[AzEKnightz]

sounds awesome, I've been waitn for this =)

[Pourman]

Interested too :D

[Drama]

I`am interested in a Oil Pan too.

[AzEKnightz]

Lower Intake:
1. joff (non-polished)
2. AzEKnightz (non-polished) 100%
3. Et3rNaL (non-polished)
4. Mirage (is it possible to get it polished haha)
5. Pourman (not sure if you wanted the GZ LIM)

Oil Pan:
1. mototek (black powdercoat)
2. Atkins Dan {QTY2}
3. Drama
4.
5.

[glenrx7]

ok, who is in ...this ready to go.......

[AzEKnightz]

ok, who is in ...this ready to go.......

I am =)

-AzEKnightz

[Mirage]

I'm still down :)

[Pourman]

+1 for GZ LIM

[joff]

I'm still in.

[speedjunkie]

I think I'm gonna jump in on this for the GZ LIM.

[AzEKnightz]

Lower Intake:
1. joff (non-polished)
2. AzEKnightz (non-polished) 100%
3. Et3rNaL (non-polished)
4. Mirage (is it possible to get it polished haha)
5. Pourman
6. SpeedJunkie

Oil Pan:
1. mototek (black powdercoat)
2. Atkins Dan {QTY2}
3. Drama
4.
5.

[Pourman]

4 more for a price drop on the LIM ;)

[glenrx7]

lim-475.00 plus shipping payal etc
Pan- 385.00

Little price drop, everything I can do to help, I know its not huge but better than nothing.

Ok so start paypaling, info@azrotaryrockets.com

Once you paypal please pm me and also make sure you put your forum name on the paypal info

[AzEKnightz]

pm'ed you.

Paypal Sent.

[glenrx7]

Sounds like I confused someone and I am sure it is confusing to others. So let me clairfy the payment and price.

The products are lim 475.00 and oil pan 385.00 this is the price NOT INCLUDING SHIPPING and PAYPAL. Sorry for the confusion. There is so little mark up on these at 475 shippied plus paypal I would be paying to sell these:O()

So 15.00 is a good aprox on shipping to the lower 48. This should avoid a little confusion on the shipping.

Thanks all. sorry for the confusion

AZRR

[glenrx7]

Lower Intake:
1. joff (non-polished)--paid
2. AzEKnightz (non-polished) paid, need shipping and paypal fee
3. Et3rNaL (non-polished)
4. Mirage (is it possible to get it polished haha) polish is 100.00....pm answered
5. Pourman
6. SpeedJunkie

Oil Pan:
1. mototek (black powdercoat)
2. Atkins Dan {QTY2}
3. Drama
4.
5.

[speedjunkie]

Money sent.

[glenrx7]

1. joff (non-polished)--paid
2. AzEKnightz (non-polished) paid
3. Et3rNaL (non-polished)
4. Mirage (is it possible to get it polished haha) polish is 100.00....pm answered
5. Pourman
6. SpeedJunkie--paid

Oil Pan:
1. mototek (black powdercoat)
2. Atkins Dan {QTY2}
3. Drama
4.
5.

[Mirage]

PayPal sent, as well as PM :)

[glenrx7]

1. joff (non-polished)--paid
2. AzEKnightz (non-polished) paid
3. Et3rNaL (non-polished)
4. Mirage Paid
5. Pourman
6. SpeedJunkie--paid

Oil Pan:
1. mototek (black powdercoat)
2. Atkins Dan {QTY2}
3. Drama
4.
5.

[glenrx7]

Ok, what happened to the other people ????????

This is a group buy based on the fact that the people that put there names in were planning on buying this was not a "wish" list. I completly understand some reasons for dropping out I would just like a heads up.

So anyway, we have a few that have not paid, just give me a heads up thanks

[speedjunkie]

I'll email Et3rNaL and see what's going on. I think he's home on leave before his deployment and probably not checking this stuff. I'll probably try to call him too.

[glenrx7]

Cool thanks, All I need is a heads up ...Thanks again

[speedjunkie]

Yeah he said he's out, haha. I guess he's decided to defect to the LSX series, haha. That sucks.

[Pourman]

PMed ............

[glenrx7]

For all That have purchased sorry for the delay. We just got these in and will be shipping this week or very early next..

Thanks for your business and paitence

[speedjunkie]

Awesome, I was going to ask about that the other day but now I'm glad I kept forgetting haha. Thanks!

[Swif]

Lower Intake:
1. joff (non-polished)--paid
2. AzEKnightz (non-polished) paid
3. Et3rNaL (non-polished)
4. Mirage Paid
5. Pourman
6. SpeedJunkie--paid

If this is still open for the GB I would like in. Is the price still $480?

[RIZZXX7]

I'd like to get in on the LIM also

[R-R-Rx7]

lmk if the gb is still on as i need a lim too

[speedjunkie]

NOW you guys come out of the woodwork HAHA. Actually I can't talk, I put my name in the GB for these last year and had to back out. Hopefully he can still hook you guys up. I don't think it's closed yet, but I could be wrong.

[R-R-Rx7]

just sent my payment
1. joff (non-polished)--paid
2. AzEKnightz (non-polished) paid
3. Et3rNaL (non-polished)
4. Mirage Paid
5. Pourman
6. SpeedJunkie--paid
7. R-R-Rx7-- paid (non polished)

Oil Pan:
1. mototek (black powdercoat)
2. Atkins Dan {QTY2}
3. Drama
4.
5.

[AzEKnightz]

Just got my LIM in today. Nice and pretty =). Thanks for the quick shipment.

-AzEKnightz

[Swif]

Still waiting to see if I can get in on this. Who do we need to talk to to send a payment to, make sure this is still going on?

[speedjunkie]

glenrx7 is the OP, PM him and ask. I'm not sure if his paypal email is the one he uses for questions too, it's worth a shot though.

Ok so start paypaling, info@azrotaryrockets.com

Once you paypal please pm me and also make sure you put your forum name on the paypal info

The products are lim 475.00 and oil pan 385.00 this is the price NOT INCLUDING SHIPPING and PAYPAL. Sorry for the confusion. There is so little mark up on these at 475 shippied plus paypal I would be paying to sell these:O()

So 15.00 is a good aprox on shipping to the lower 48. This should avoid a little confusion on the shipping.

[Swif]

I had contact with glenrx7 and he had two left about a month ago, but I had something come up. I have been trying to contact for the last week to see if he has any more left or if he plains to order more and I have heard nothing back.

Can anyone contact him? I have the money once again and I am ready to buy.

[RIZZXX7]

does anyone from there even check this forum?

[glenrx7]

I am really sorry guys and gals...... It has been very busy at the shop, however this is no excuse.

We have about 4 in stock so if you would like to order do it quick we maybe closing this soon

[R-R-Rx7]

Glen is a stand up guy !!! received my manifold really quick !!! Thanks again brother

[RIZZXX7]

can you pm me a price shipped to 23456