GZ LIM group buy

[glenrx7]

Hey All, We would like to introduce ourselves with a group buy for the GZ (Xesessive Mfg.) Lower Intake Manifold.

List Prices for products can be found on Rich's Site and ours listed below:

http://www.azrotaryrockets.com/

http://www.xcessivemanufacturing.com



Polishing is going to be 110.00 per manifold.

Manifold at gb price 480.00 plus shipping and paypal fees

Also GB price on the Xesessive OIl Pan 395.00 plus shipping and paypal fees

Rich at Xesseive quoted a two week period to cast 15 manifoilds, add another week for polishing.

[proz07]

so again what about the xcessive LIM 4 PORT FUEL RAIL???? will this be included at an additional price or seperate. being that you can not use current aftermarket fuel rails without modification of 2 more ports. i already have the LIM im interested in the 4 PORT FUEL RAIL and the oil pan.
z

[glenrx7]

Well, the price for the manifold is for the manifold alone. No the rail is not included. I can get you a price on that rail tomorrow. I will pm you.

Thanks

[charlies7]

Im down.

[KaiFD3S]

Count me in

1. KaiFD3S (Not Polished)

[dhahlen]

Hell of a deal.....

Glen, I'd be more than happy to give you a hand shipping these bad boys out if you need it. Not that you will but I'm here to help.

[McVicker]

Whats the time limit on these bad boys?

[WankelPwr93]

Will the manifold come with plugs or caps for the extra injector bungs?...

[silverfd3s]

i just moved over from the club.this is my first post but im good for it.i want a non polish manifold and possible fuel rail depending price.
rx7club screen name lgjp2631 been there for years

[glenrx7]

Whats the time limit on these bad boys?

Well it is going to be up for atleast a couple of weeks. The foundry has to finish this batch of castings then they need to be machined before shipping. I will keep everyone in the loop.

[glenrx7]

Will the manifold come with plugs or caps for the extra injector bungs?...

Yes, they come with the plugs for the two extra injector ports if they are not going to be used.

[dhahlen]

Damn rx7club deleting my links.

Tell your friends about this GB guys, we need to get this word out and help this forum grow!

[d33]

I am interested in the Oil Pan. Just a question, are they in stock? I have been trying to get one for some time but have been told they are out of inventory. So I was just going to get the Banzai Racing oil pan brace instead.

So if the pan is available I will probably jump on that.

[sk8world]

so with a group buy of 10-12 we can only get $30 off? Or did I miss something?

[glenrx7]

so with a group buy of 10-12 we can only get $30 off? Or did I miss something?


sk8world is no longer apart of this group buy, please purchase elsewhere:rofl: J/K of course....acually the list is 525.00 I had a typo on the site for 510.00
sorry for the confusion.

Well if it turns out to be 10-12 I might beable to do a little better but there is not alot of mark up on this product.

Let get this organized, please copy list below and add you name if you are going to want one of the manifolds, oil pans, or rail.

Manifolds:
1.
2.
3.

Oil Pan:
1.
2.
3.

Fuel Rails
1.
2.
3.

[KaiFD3S]

Manifolds:
1. KaiFD3S ( Not Polished )
2.
3.

Oil Pan:
1.
2.
3.

Fuel Rails
1.
2.
3.

[proz07]

Manifolds:
1. KaiFD3S ( Not Polished )
2.
3.

Oil Pan:
1.proz07
2.
3.

Fuel Rails
1.proz07 (4 port)
2.
3.

[ryan1]

Manifolds:
1. KaiFD3S ( Not Polished )
2. ryan1 ( not polished)
3.

Oil Pan:
1.proz07
2.
3.

Fuel Rails
1.proz07 (4 port)
2.
3.

[KaiFD3S]

Manifolds:
1. KaiFD3S ( Not Polished )
2. ryan1 ( not polished)
3.

Oil Pan:
1.proz07
2.
3.

Fuel Rails
1.proz07 (4 port)
2.KaiFD3S (4 Port)
3.

[treceb]

does their fuel rail provide a location for the fuel temp sensor? or is it like a KG rail but for 4 injectors instead of 2?

[Max_Spd]

Manifolds:
1. KaiFD3S ( Not Polished )
2. ryan1 ( not polished)
3. Max_Spd (Not Polished)

Oil Pan:
1.proz07
2.
3.

Fuel Rails
1.proz07 (4 port)
2.KaiFD3S (4 Port)
3.

[d33]

Manifolds:
1. KaiFD3S ( Not Polished )
2. ryan1 ( not polished)
3. Max_Spd (Not Polished)
4.

Oil Pan:
1.proz07
2.d33 (Danny)
3.

Fuel Rails
1.proz07 (4 port)
2.KaiFD3S (4 Port)
3.

[charlies7]

Manifolds:
1. KaiFD3S ( Not Polished )
2. ryan1 ( not polished)
3. Max_Spd (Not Polished)
4. Charlies7

Oil Pan:
1.proz07
2.d33 (Danny)
3.

Fuel Rails
1.proz07 (4 port)
2.KaiFD3S (4 Port)
3.

[KaiFD3S]

Took myself off the Fuel Rail list as I may be able to use mine...

Manifolds:
1. KaiFD3S ( Not Polished )
2. ryan1 ( not polished)
3. Max_Spd (Not Polished)
4. Charlies7

Oil Pan:
1.proz07
2.d33 (Danny)
3.

Fuel Rails
1.proz07 (4 port)
2.
3.

[FreeLance]

I'm Mono4lamar on rx7club. What's the price on the 4 port fuel rail? Also, the price from Pineapple racing is 510 so that pretty much makes the retail price 510. I was also hoping for a much better discount. Pending on the price of the fuel rail and hopefully a better group buy price I'll be interested. Thanks!

[speedjunkie]

Manifolds:
1. KaiFD3S ( Not Polished )
2. ryan1 ( not polished)
3. Max_Spd (Not Polished)
4. Charlies7
5. speedjunkie (not polished)

Oil Pan:
1.proz07
2.d33 (Danny)
3.

Fuel Rails
1.proz07 (4 port)
2.
3.

[glenrx7]

Ok people, look i am trying to help. Thats it, I stand to make 15 bucks at the most on these. So if you dont like the price go buy it retail. Simple, 525.00 is the manufacturers price ,if some one lowers it than buy it from them. It is not 480.00 I assure you.

[railgun]

My question here is that of time. From now, how long would it be to receive this? I'm in a crunch and it's going to be before April, then yea! I'm due to tune and this is kind of last minute and would rather not tune just to slap this on and screw it all up.

Thanks in advance!


Manifolds:
1. KaiFD3S ( Not Polished )
2. ryan1 ( not polished)
3. Max_Spd (Not Polished)
4. Charlies7
5. speedjunkie (not polished)
6. Railgun (unpolished)

Oil Pan:
1.proz07
2.d33 (Danny)
3.

Fuel Rails
1.proz07 (4 port)
2.
3.

[Brent]

Manifolds:
1. KaiFD3S ( Not Polished )
2. ryan1 ( not polished)
3. Max_Spd (Not Polished)
4. Charlies7
5. speedjunkie (not polished)
6. Railgun (unpolished)
7. Brent (not polished)

Oil Pan:
1.proz07
2.d33 (Danny)
3.

Fuel Rails
1.proz07 (4 port)
2.
3.

[13bmaniac]

hello there im 13bmaniac on the rx7club im down with a lim manifold as well not polished.. hope we can still get a better price but still better this way

Manifolds:
1. KaiFD3S ( Not Polished )
2. ryan1 ( not polished)
3. Max_Spd (Not Polished)
4. Charlies7
5. speedjunkie (not polished)
6. Railgun (unpolished)
7. Brent (not polished)
8. 13bmaniac (not polished)

Oil Pan:
1.proz07
2.d33 (Danny)
3.

Fuel Rails
1.proz07 (4 port)
2.
3.

[silverfd3s]

i def want the manifold not polished but whats the price on the fuel rail?
Manifolds:
1. KaiFD3S ( Not Polished )
2. ryan1 ( not polished)
3. Max_Spd (Not Polished)
4. Charlies7
5. speedjunkie (not polished)
6. Railgun (unpolished)
7. Brent (not polished)
8. 13bmaniac (not polished)
9. silverfd3s ( not polished)
Oil Pan:
1.proz07
2.d33 (Danny)
3.

Fuel Rails
1.proz07 (4 port)
2.silverfd3s (matching rail for manifold)depending price
3.

[glenrx7]

Hey all looking good, I will get prices on the rail for all that need one. Should be monday.

[treceb]

...
does their fuel rail provide a location for the fuel temp sensor? or is it like a KG rail but for 4 injectors instead of 2?

[glenrx7]

...

Oh sorry I missed that. I will find out I think you can get it with or without.

Last one we had did not have a place for the sensor so we drilled and tapped for it .

[Chadwick]

Hey all looking good, I will get prices on the rail for all that need one. Should be monday.

Any word?

Thanks,
Dan

[13bmaniac]

hey whats goin on here is the gb cooling off or what i think some of us need that lim ASAP

just toknow what are the latest updates

[glenrx7]

Well looks like Xessesive has a few more to get from the foundry and they will have enough to cover this group buy. Should be next week we can start shipping. So lets get are names up here quick

Rails are going to be 240.00

Sorry guys and gals I dont get a great deal on these and I am there dealer...I think they pay alot for the extrution.

I also dropped the ball and forgot to ask about the sensor bung in the rail...sorry again I am only humna:seeya:

[joe-c]

im real interested

[fritts]

Have there been any dynos back to back to show what increases in HP this gives. Equalizing the flow between the front and rear rotor is always benefit but I can clean those AFR's up with my ecu. I'm just wondering if the LIM is really the restriction in the stock setup.

[charlies7]

I dont see why not..The LIM is equal flow and has larger runners. More fresh air to the rear cant hurt.

[fritts]

My question is whether the UIM and TB could be more of a restriction than the LIM. Don't get me wrong I like what it does but it may not be the best bang for the buck wise, which is why I was wanting to see if anyone had dyno'd it against a stocker.

[13bmaniac]

hello my friends i dont know if anibody here that plans to run the xcessive lim has a t51rkai turbo kit because this kit only works with the jdm LIm i dont know if there its going to be some fitment issues there... hey glen if you talk to these guys please ask him, if i have time iwill give him a call but f you remnber iwill apreciate the help...

[proz07]

removed my name from the oil pan i ended up getting the one from charlie7 instead. but i still want the fuel rail
any updates?
z

Manifolds:
1. KaiFD3S ( Not Polished )
2. ryan1 ( not polished)
3. Max_Spd (Not Polished)
4. Charlies7
5. speedjunkie (not polished)
6. Railgun (unpolished)
7. Brent (not polished)
8. 13bmaniac (not polished)
9. silverfd3s ( not polished)

Oil Pan:
1.d33 (Danny)
2.
3.

Fuel Rails
1.proz07 (4 port)
2.silverfd3s (matching rail for manifold)depending price
3.

[Max_Spd]

Ok so lets get this thing expedited :D

PS if anyone wants i have my 95/JDM LIM for sale ;) which has no EGR and all block off plates installed...

[letsgo7]

hi, my first post... i was refered from RX7club.com about this group buy... interested but i would like to know how much of a price break we are getting.

thanks

-joe

p.s. I'm 90% in... let me know by email if possible when the money is needed... thank you

[tom93r1]

480 + shipping
regular price is 525 + shipping

so $45 savings, or just under 10%

[letsgo7]

when do i need to pay?

[Max_Spd]

Hopefylly soon, when the group buy reaches the goal or peaks off in interest like its doing right now :D lol

Glen will post when, how much and how he wants the funds received!!!

[letsgo7]

Manifolds:
1. KaiFD3S ( Not Polished )
2. ryan1 ( not polished)
3. Max_Spd (Not Polished)
4. Charlies7
5. speedjunkie (not polished)
6. Railgun (unpolished)
7. Brent (not polished)
8. 13bmaniac (not polished)
9. silverfd3s ( not polished)
10. letsgo7 (not polished) <~ME!

Oil Pan:
1.d33 (Danny)
2.
3.

Fuel Rails
1.proz07 (4 port)
2.silverfd3s (matching rail for manifold)depending price
3.

[Pourman]

Does the GZ LIM work with the KG Parts fuel rail ???

[tom93r1]

Yes the KG parts rail will work with the GZ LIM. It only has 2 injector ports so the other 2 on the LIM get plugged.

[letsgo7]

if KG parts rail fit... i could get the other two injectors position milled out?

[Max_Spd]

Yes, they offer that service if you send them your rail!!! ;)

[13bmaniac]

hello... when the gb will proceed what the guys at xcessive say...

im anxious

[glenrx7]

Should be about ready to start shipping. I will let you all know. Could you Please PM me if you are still on board with this GB.

[13bmaniac]

of course im in. pm sent

[charlies7]

Pm sent last night.

[letsgo7]

i sent a pm... did you get it?

[glenrx7]

Yes, we should be getting back to you all today will shipping times, totals, and delevery dates.

[d33]

Since I am the only one on the GB list for the oil pan, does that mean I can still get if for the price?

[Pourman]

LMK too ...

[joe-c]

when is this group buy ending? im in the middle of the atlantic ocean right now on a aircraft carrier

[Erdin]

Manifolds:
1. KaiFD3S ( Not Polished )
2. ryan1 ( not polished)
3. Max_Spd (Not Polished)
4. Charlies7
5. speedjunkie (not polished)
6. Railgun (unpolished)
7. Brent (not polished)
8. 13bmaniac (not polished)
9. silverfd3s ( not polished)
10. letsgo7 (not polished) <~ME!
11. Erdin (not polished) PM me when rady please

Oil Pan:
1.d33 (Danny)
2.
3.

Fuel Rails
1.proz07 (4 port)
2.silverfd3s (matching rail for manifold)depending price
3.

[Max_Spd]

PM'd you!!!

[letsgo7]

i didn't get any PM's!!!! what's going on?! thanks

-joe

[13bmaniac]

hey what its goin on here is this thing cooling off or what, does the people flaked on this??

hey glen please keep us updated, and sorry for been such a pain in the ... i dont want to be a pusher either just want to know what he guys at xeccesive said...

[glenrx7]

Hey All, NO, I have not flaked on you. Give me a couple of days I have yet to here from Rich, I should be getting something very soon. As soon as I hear somthing I will post it up.

Thanks

Glen
AZRR

[Pourman]

I'm down for a LIM and an Oil Pan ... keep us posted :)

[glenrx7]

Ok girls and boys, Talked to Rich he is machining the castings today, so we can start shipping as early as tomorrow.

Our Paypal is info@azrotaryrockets.com

Price is as follows:

Manifold unpolished 480.00
Paypal 3%
shipping is 10 for western parts of us 15.00 for eastern

Oil Pan 395.00
paypal 3%
Shipping flat rate of 16.00

Fuel Rail 260.00
Paypal 3%
shipping is free with manifold add 9 bucks flat rate if not bought with manifold

Please paypal when you are ready to have one shipped, should ship around a day or two after payment is recieved.:001_005:

[proz07]

payment sent for one GZ 4 port fuel rail
z

[Erdin]

Glen, i need to know what the shipping is going to be to the UK, can you check your PM please.

Cheers
Erdin

Ok girls and boys, Talked to Rich he is machining the castings today, so we can start shipping as early as tomorrow.

Our Paypal is info@azrotaryrockets.com

Price is as follows:

Manifold unpolished 480.00
Paypal 3%
shipping is 10 for western parts of us 15.00 for eastern

Oil Pan 395.00
paypal 3%
Shipping flat rate of 16.00

Fuel Rail 260.00
Paypal 3%
shipping is free with manifold add 9 bucks flat rate if not bought with manifold

Please paypal when you are ready to have one shipped, should ship around a day or two after payment is recieved.:001_005:

[charlies7]

Payment sent for the LIM, thanks.

[FreeLance]

I also sent payment. Unfortunately paypal won't ever let me take my mothers address from 5 years ago off the account! Please ship it to my shop. My email address (paypal address) is:

Lance Mayhon
1228 County Route 2
Olivebridge, NY 12461

Charlie can confirm this address is legit :)

[Max_Spd]

Payment sent!!! Thanks...

[charlies7]

:icon_tup:

I also sent payment. Unfortunately paypal won't ever let me take my mothers address from 5 years ago off the account! Please ship it to my shop. My email address (paypal address) is:

Lance Mayhon
1228 County Route 2
Olivebridge, NY 12461

Charlie can confirm this address is legit :)

[13bmaniac]

paypal payment sent from dnl_barba@yahoo.com please send that manifold to miami florida as soos as you can.
cheers,

[Erdin]

Payments sent Sir.....

[Pourman]

OK , did I miss the page for "how much" and where to send $$ ??

[glenrx7]

OK , did I miss the page for "how much" and where to send $$ ??

Ok girls and boys, Talked to Rich he is machining the castings today, so we can start shipping as early as tomorrow.

Our Paypal is info@azrotaryrockets.com

Price is as follows:

Manifold unpolished 480.00
Paypal 3%
shipping is 10 for western parts of us 15.00 for eastern

Oil Pan 395.00
paypal 3%
Shipping flat rate of 16.00

Fuel Rail 260.00
Paypal 3%
shipping is free with manifold add 9 bucks flat rate if not bought with manifold

Please paypal when you are ready to have one shipped, should ship around a day or two after payment is recieved.

[glenrx7]

For those whom have paid we should be shipping tomorrow. There were a couple that are still waiting to clear paypal once they do we will ship.

Also, want to let all the people that have yet to order they should do asap, we will be closing this group by in the next week.

Thanks

[letsgo7]

so... what is the final price?! 3% paypal... what does that mean?!

-joe

[joe-c]

payment sent paypal eueu70@aol.com

[glenrx7]

so... what is the final price?! 3% paypal... what does that mean?!

-joe


It means you pay 480 plus shipping for the manifold as an example , then you need to add 3% for the fee paypal charges for the transaction.

ie:480+10+3%=504.7

[13bmaniac]

hey glen any idea on when are you going to ship those LIM??

[glenrx7]

hey glen any idea on when are you going to ship those LIM??
As soon as your paypal clears, cant ship until I have the money. Should not be more than a day or two.

Thanks

Glen

[glenrx7]

Ok, folks other than waiting for two echecks to clear all manifolds and rails are shipping today.

Thanks for your business.

We are about 3-4 days away from closing this GB. So if you are in get it ordered asap.

Thanks again

[letsgo7]

payment sent!

-joe

[joe-c]

hey thanks for working with me glenn

[13bmaniac]

hello glen just to let you know that payment just clear, so let me know when you ship the manifold and please send me a track number my friend.
thanks for all the help here, nice to make business with you guys.

cheers

[13bmaniac]

helloooo????????

[glenrx7]

Hey There, should be shipping monday morning I will get a tracking number out to all that ship.

A few went out Friday.

[FreeLance]

I sent my payment the 24th? When will I receive my manifold? Did you get to ship it to the changed address?

[glenrx7]

Ok, I know a bunch of you have sent payment. These are drop shipping so we should beable to get tracking numbers tomorrow or wed. They did not get shiiped untill friday and they went out in the order they were recieved. Sorry for the wait however seems to be going quick.

Thanks

[13bmaniac]

well thats ok just to know and be alert are you going to pm the track number here on the forum or you will send and mail to all of us, just to checkonce in a while a be alert.
cheers

[Max_Spd]

Just an FYI I got mine in yesterday via USPS :D

[glenrx7]

Ok, looks like everything is going to ship today if it has not already shipped I will be pming tracking numbers today.

We will be closing this Friday. So lets get the rest of the orders done, we are not taking orders for the group buy price after Friday.

[13bmaniac]

hey my friend do you have any track number i have not receive anithing yet.
thanks

[13bmaniac]

no tracking no lim come we need some updates here

[charlies7]

I recieved mine..packing was decent and the primary runner have severe pitting from the casting process near the block..

[13bmaniac]

damm i thing i will be the last to receive this thing and these guys dont reply back from last week and i cannot trace the package cause i dont have the track number.

[glenrx7]

PM Sent

[glenrx7]

I recieved mine..packing was decent and the primary runner have severe pitting from the casting process near the block..

Hey could you send a picture of the pitting and I will talk to Rich. The goal here is everyone is happy if your not we will rectify the issue asap.

[glenrx7]

damm i thing i will be the last to receive this thing and these guys dont reply back from last week and i cannot trace the package cause i dont have the track number.


We found your tracking information, Looks like this was delivered on the third of April and then refused on the 5th. We verified the shipping is indeed what you provided, once the package is recieved back to Rich at Xsessive we will update you.

[proz07]

interested in a little feedback as i have also not recieved what i ordered
z

[charlies7]

Ill get it to you this weekend Glen.

Hey could you send a picture of the pitting and I will talk to Rich. The goal here is everyone is happy if your not we will rectify the issue asap.

[13bmaniac]

i dont understand how the package will be refused we receive packages all days from usps ups fedex etc,but either way please solved my problem im waiting for these thing to finish my built, i i also dont uderstand why you never pm the track numbers to the people, so its a mistery when we are going to receive this things if you should pm the numbers people will be alert on this.
please keep this updated

[glenrx7]

Well sorry for the inconvience. We will get back to you asap. Rich and I have decided for now we will PM details but not tracking numbers to be safe. I will be getting back to you all tomorrow once all the infomation has been gathered.

Thanks

[letsgo7]

same here, i haven't gotten anything. :(

[glenrx7]

Hey all. I am very sorry I have not gotten back to you all on a more timley manner. The shop has been slammed and Rich has been very busy getting all this together with little help. I will get every one that has not gotten ther orders taken care of asap. I am going to be getting everything checked out and check on tomorrow before the weekend.

Thanks to you all for a great group by ...Should be much smoother the next one.

[13bmaniac]

well i thing you should do that andd keep post al the people that have pay and not receive the manifold yet, sometimes people can get a litle desperate if dont have info in my case im waiting just for the manifold to finish my built and i will apreciate if you shipped after weekend for me and for all other guys waiting
thanks

[13bmaniac]

any updates???

[glenrx7]

any updates???

It is just now 630am on monday...Rich does not work the weekend, I do however I try to keep that for in house work. I will get the information sent out today after Rich gets in.

Thanks

[13bmaniac]

ok sorry for been such an ass here but it seems that im the only one that has not receive the lim cause nobody else says nothing im always the guy that yell to the guy who kindly offer to do the GB, so once again i want to know what its going on with the LIM and when its going to be shipped.


thanks

[proz07]

im usually not one to bug people getting me nice parts for good prices but seriosly whats going on. you mentioned a possible scam and thats why you werent posting tracking numbers...ok. iv have read numerous "ill let you know today" posts. To be honest im starting to think im the one being scammed here!!!!
z

[charlies7]

ok sorry for been such an ass here but it seems that im the only one that has not receive the lim cause nobody else says nothing im always the guy that yell to the guy who kindly offer to do the GB, so once again i want to know what its going on with the LIM and when its going to be shipped.


thanks

im usually not one to bug people getting me nice parts for good prices but seriosly whats going on. you mentioned a possible scam and thats why you werent posting tracking numbers...ok. iv have read numerous "ill let you know today" posts. To be honest im starting to think im the one being scammed here!!!!
z


You guys arent going to get scammed by Rich nor Glen.

[glenrx7]

People, I am sorry you have not gotten Information, The two people with issues are the ones that asked me to ship to another address than what the have on paypal and I obliged. I have left a voice mail for Rich Monday, I left a post Monday now it is Tuesday, when I here from Rich I will let you all know.

I think we have been fair and accommodating give us a chance

[13bmaniac]

Ok first of all i recognized im a pain inthe ass but i never ever used the scammed word i know this eople are well know inthe rotary conmunity and im aware of that. the only thing im complaining for is the lag of information thats all. i thing ts a normal behavior , when you pay for something you want it that all. i know im aware of mi situation im just stablishing in miami right know and i have to openmy new paypal account with my new addres and i apreciate this guys give a vote of confidence and want to send the LIM to miami for me.
and once again i apreciate you guys are doing these. just let us know when you here from rich and let me know when you ship.
thanks

[letsgo7]

Glen,

i didn't get a track number either. 13bmaniac, i'm on the same boat... didn't get anything. It's 16th of april and i sent out my payment on the 27th of march... i don't know what's taking so long but when you pay for parts at a discount things like delay is more common. anyhow...

glen, i will give you a call sometime today.

thanks

-joe

[glenrx7]

Glen,

i didn't get a track number either. 13bmaniac, i'm on the same boat... didn't get anything. It's 16th of april and i sent out my payment on the 27th of march... i don't know what's taking so long but when you pay for parts at a discount things like delay is more common. anyhow...

glen, i will give you a call sometime today.

thanks

-joe


Please understand Guys and Gals ....I it is hard to keep all of this in line I am hoping next time we will have it down better, this is the first GB we organized, I would have liked a little more control of this....

If any one has issues or would like to conact us please call 480-656-9213
If you get a VM please leave a message and we will reurn your call.


Thanks again

[13bmaniac]

just keep us pos it and let us know when you ship

[13bmaniac]

thanks glen pm received

[letsgo7]

am i the only guy didn't get the part nor the PM?!?!

-joe

[proz07]

+1

am i the only guy didn't get the part nor the PM?!?!

-joe

[Erdin]

I also havent got no Tracking number yet????

[letsgo7]

what da heck...

[glenrx7]

This is nuts...Erdin I have been sending PM'S and keeping you up todate ...Your paypal had to clear and your in the UK. I will have a Tracking number for you asap. I have been Talking to Letsgo7 on the phone once a week, and sending PM's You are shipping to an adress that is not yours we are trying to cover our selves thats why you are not getting a tracking number I will PM once I have some data from Rich.

[Erdin]

This is nuts...Erdin I have been sending PM'S and keeping you up todate ...Your paypal had to clear and your in the UK. I will have a Tracking number for you asap. I have been Talking to Letsgo7 on the phone once a week, and sending PM's You are shipping to an adress that is not yours we are trying to cover our selves thats why you are not getting a tracking number I will PM once I have some data from Rich.

Hi glen my paypal cleard and you sade you were going to get me a traking number thats the larst i hard from you up until now:)

[letsgo7]

glen,

glad that you replied. First this is not NUTS. And i am not mad at glen nor Arizona rotary. I'm just curious about the situation. BUT i am worried about Xcessive.

i didn't get any pm's from you, ever. And please don't blame it on the different address because i have called twice before placing an order and one of those time i have asked if it was going to be a problem and you said it's FINE.

you said you are busy with cars at the shop.... so should i call Rich to see if he can give me a tracking of some kind? are you sure that Rich shipped it? i mean... it should only take 2~3 days for ups ship from OR to CA, at max of 5~6 days.

-joe

[Erdin]

Guy’s, listen I know this is taking long after all I am still waiting for my own manifold but I tell you this Glen and the others are good guys so don’t find your self’s worried about not getting you parts, I of all people should be worried as I live in the UK but im sure it will turn up sooner or later. Lets give him some more time.

[RCCAZ 1]

Got mine today. Thanks Glenn!

[letsgo7]

from chatting on the phone... i get a great vibe from Glenn. But my worrying is at the makers of the LIM.

anyhow... glad to hear that RCCAZ1 has got one... hopefully this starts a good trend!

-joe

[proz07]

well i did recieve something.... an empty envelope thats all ripped up im on my way to the post office to find out some more info . i just hate it when shipping fucks up a good thing.

z


PM sent to glenrx7

[Erdin]

Glenn,
i tryed calling you at the shop but there was no answer, so whats going on, as i havent received anything yet and you havent replayed to my pm.

[letsgo7]

DUDES,

i just called glenn! he said to wait... major shipping MIX up at the Xcessive NOT at Arizona Rotary Rockets.

Thanks Glenn!

-joe

[Erdin]

Yep got a PM from Glenn too, so just need to wait a bit longer

[letsgo7]

man... it's already Wednesday.... nothing... anyone get there stuff?

[proz07]

man... it's already Wednesday.... nothing... anyone get there stuff?

LOL :biggrinjester: so what ever happened to "wait dudes"

PM sent glenrx7

z

[letsgo7]

hahahaha... i know.... just wondering how everybody is doing...

[Erdin]

Glenn, is there any updates on my order?

[glenrx7]

Glenn, is there any updates on my order?


pm sent sorry Erdin

[Erdin]

hi Glenn, not a problem but could you check your PM's again.

cheers
erdin

[glenrx7]

hi Glenn, not a problem but could you check your PM's again.

cheers
erdin


All taken care of...

[glenrx7]

OK folks everyone should be good. If not please PM me asap.

One issue that remains, Rich misshipped a duplicate to one of the members on this board. I was hoping we could all incourage this unnamed person to ship the manifold back, we will pay shipping back but this is way uncool to take advantage of us.

We have been more than stand up on this GB infact we have shipped a rail out in good faith after one was lost in shipping at our own expense, I know a few people had to wait a while for there product, however we have bent over backwards for the members on this GB.......

Thanks

AZRR

[Erdin]

Hi Glenn, thanks for the great product:)

[oorx7]

Hey glen, hows it going. Your right about the fun of running a GB.

I might want to get one of these for my self. Now that I have completely redesigned my fuel system around it. LOL

~Brandon

[d33]

Man,

I totally blanked on this.

[AzEKnightz]

is there any more GB going on? Or is this even available anymore? Please pm me for quicker response for the reason that I dont check the forum nowadays. Please let me know, thanks.

-AzEKnightz

[MotoTek]

I might be down to get in on a new group buy. GZ LIM, Oil Pan, and CJ Rails.

[AzEKnightz]

hmm, still no reply yet.

[glenrx7]

Hey Guys, we are working on some group buys and new products and product upgrades with Rich . I will post more monday

Thanks

Glen
AZRR

[AzEKnightz]

Hey Guys, we are working on some group buys and new products and product upgrades with Rich . I will post more monday

Thanks

Glen
AZRR

Thanks, will wait patiently =)

-AzEKnightz