New Fuel System setup - Feeler

[Garfinkles Motor Works]

Here are some pictures of a new fuel system setup that I have made.
Let me know what you think........

Also shows the same fittings on the aftermarket FPR

[Garfinkles Motor Works]

Each new fitting has three o-rings to seal the part .The bracket is 3/8 steel ,the tube is a drilled through steel bar not thin wall tubing .The JIT fitting is brazed on ,not ferrule fit . The tube is brazed to the bracket as well .The fittings can be made with push on tubes for the stock rubber fuel lines . Chad may post picts of the fittings alone later .so you can see the o-ring set up .

[Herblenny]

I had a chance to see these items in hand and they are top notch work!

I can't wait to get this bracket for my system!!
http://rotarycarclub.com/rotary_forum/attachment.php?attachmentid=3841&d=1231298945

Thanks David for making unique custom parts!!

[fire85gslse]

Pics are posted David.

And remember JIT fittings are cheaper than AN, dont require a special tool, and are made of stainless steel.
Also as seen the JIT fittings are on my fuel lines from the tank so a direct connection to the SS line.

Chad

[MOBEONER]

what is the price of these baby's.

[Brent]

This looks great David! Just waiting on the price!

[fire85gslse]

This is a great setup and know exactly all the man hours that are involved in making it. I can tell you it will be worth the price he sets on it. I think I spent about $50 for each fuel Rail fitting. It is better that the AN fittings if you ask me.

A true work of art. If only I knew half of what he has forgotten.

[MOBEONER]

that reminds me of when i was like 17-18 or so and i hung around JAYTECH`s shop when he operated his cnc machine and i would just sit there and look at the drill bits make a wooden mold for an intake manifold.it was just amazing how much work goes into just one part and we still complain about prices.lol

[Garfinkles Motor Works]

The brackets are wire edm cut with the holes so the machine has to be rethreaded four times each part .The tube starts is a solid peace of steel,drilled turned to size and groved for the two 0-rings . The bracket is countersink on eack side for the o-ring ,the third one, and to be brazed on the other .The allen holes are counterbored ,this allows the bolts to clear the oil injector with a filter .The Jit fitting has the threads cut off for good looks ,is drilled out to fit the tube .then all parts are brazed together .Then sandblasted and inspected .I have been using my set up for seven or eight years now .I suggest that you drop the fuel lines and braze JIT fittings on them for a complete job .Also I relocate the fuel filter at this time . Alot of money at one time but you should never need to do any more later .

[fire85gslse]

This is a great setup and know exactly all the man hours that are involved in making it. I can tell you it will be worth the price he sets on it. I think I spent about $50 for each fuel Rail fitting. It is better that the AN fittings if you ask me.

A true work of art. If only I knew half of what he has forgotten.



Bump for a sweet setup

[Garfinkles Motor Works]

These fittings take longer to make then any other of the parts I sell .I have one set ready to sell as of today 8-30-10

[dguy]

I'm interested in 3 fittings, do you happen to have any in stock? Thanks much.

[Garfinkles Motor Works]

I make a fitting for the end of both fuel rails nearest the fire wall and I cut and drill fittings to be brazed onto the fuel lines to and from the tank near the fire wall .What do you need ?

[FD3sAutobot]

I'm interested in a set. Sent you a pm.

[Garfinkles Motor Works]

I have a set ready to send .

[Herblenny]

When you making me one of these David :)

[Garfinkles Motor Works]

Phil do you need a set ? The parts for your turbo oil return fittings are sitting on the work table as I type,I am going to machine and braze them next .

[FD3sAutobot]

My wife informed me they just came in the mail yesterday! Thanks again David!

[Garfinkles Motor Works]

you are welcome. I need to make some more ,to much to do .

[neit_jnf]

Can you make these to replace the in and out lines from the primary rail but use nipples instead? to be used with regular fuel injection hose...

[Garfinkles Motor Works]

I will look in to it and let you know tomorrow .

[dHungGonzalesa]

Working in a bank is usually a challenge sometimes. From the bucks I committed to this bank, We have earned about 2 percent on my checking account. Much safer then investing take advantage stocks which you could lose big money. It is always wise to stick your dollars in many different places. {absa internet banking} (http://absaonlineinternetbanking.info/absa-internet-banking-online)

[Garfinkles Motor Works]

If I had any money I would pay off my bills and save the rest .

[Clacor]

You have a PM...

Thanks..!!

[Garfinkles Motor Works]

Did I answer all your questions ?

[Garfinkles Motor Works]

I see the female fittings for the steel braded lines have gone up in price .