bwaits
01-01-2009, 05:46 PM
To many cars, projects and parts. Need to make room for an Rx3 that is soon to be coming for a vitsit
What we have is a 1976 Mazda Rotary Pickup. Typical condition. Is drivable and was for the last 10 years or so by the previous owner. Some rust spots. Some broken lenses. Just a typical old REPU. Sold by bill of sale.
I recently installed a 6 port S4 motor of unknown mileage. Does not smoke. Has good power. Stock Hitachi carb needs rebuilding and some tinkering. Trans is a 81-83 Rx7 unit with modified shifter location (No cutting of the truck sheet metal for install). Racing beat header into unknown brand muffler.
Stock wheels are back on the truck. Needs tires. I will though in a complete REPU rear end, another bench seat and a few odds and ends.
Truck as it sits with motor and RB Holley carb and manifold = $1700
Truck as is sits with motor and stock hitachi Carb = $1400
Truck as a roller. (Just as described minus, motor, trans and carb) = $1000
Just remember this is just a plain old REPU. Some would just drive it like it is and some would want to completely rebuild it. I have an ongoing REPU project so I do not need this one.
I will consider accepting a CC on the purchase for a 3% charge - if I feel you are trustworthy. I will help load it for transfer if you setup the shipping.
-billy
respeed@mrcmfg.com
What we have is a 1976 Mazda Rotary Pickup. Typical condition. Is drivable and was for the last 10 years or so by the previous owner. Some rust spots. Some broken lenses. Just a typical old REPU. Sold by bill of sale.
I recently installed a 6 port S4 motor of unknown mileage. Does not smoke. Has good power. Stock Hitachi carb needs rebuilding and some tinkering. Trans is a 81-83 Rx7 unit with modified shifter location (No cutting of the truck sheet metal for install). Racing beat header into unknown brand muffler.
Stock wheels are back on the truck. Needs tires. I will though in a complete REPU rear end, another bench seat and a few odds and ends.
Truck as it sits with motor and RB Holley carb and manifold = $1700
Truck as is sits with motor and stock hitachi Carb = $1400
Truck as a roller. (Just as described minus, motor, trans and carb) = $1000
Just remember this is just a plain old REPU. Some would just drive it like it is and some would want to completely rebuild it. I have an ongoing REPU project so I do not need this one.
I will consider accepting a CC on the purchase for a 3% charge - if I feel you are trustworthy. I will help load it for transfer if you setup the shipping.
-billy
respeed@mrcmfg.com