used parts section for sale cheap! check it out

[730RWHP12A]

used parts for sale section cheap!!! remember its a buyers market so all prices are negotiable! also if you dont see a part listed you can always request it :)
--------------------------------------------------------------------------------

i will update this list weekly, so check back often to see if there is anything you want
13B racingbeat exhaust heade--- like new $180.00

used low mileage GSL-SE 13B motor with warranty $500.00

used 12A that runs with oil leak $300.00

used JDM FD 5 speed transmission, does not grind works great $400.00

nikki carb, race prepped $300.00

de-smogged 12A nikki intake manifold(egr and coolant passages have been welded up to reduce intake temperatures) a great power upgrade for cheap! $80.00

black sunroof latch assembly, round dial type( 80-83).......$60.00


exterior door handles fits 79-85 cars.....$25.00

exterior door handles fits 86-92 cars.....$60.00

84-85 power window switches..... $40.00

quiet good condition 79-80 transmission with warranty $350.00

grey 84-85 center armrest assembly, good condition, from a GSL model....$40.00


glass sunroofs avail, 80-85 ppg mfg.. good condition $200.00

new GT47-80 garret turbo.......$2,000

gsl=se afm (used)$40.00

msc engine rotors, housings available, please inquire within(pm)

turbo 2 intake manifold inlet adapters(2-1/2 straight inlet)..... $80.00

turbo 2 intake manifolds uppers and lowers available $60.00-$120.00

gsl-se suspension complete changeover includes everything you will need to convert your car ! brakes, rotors have approx. 2,000 miles, front struts were also replaced 4,000 miles ago with original kyb inserts.......$1,500

complete 85 12a non turbo motor.. was running great when removed for a turbo swap.. guaranteed to run good!!!..........$650.00

several msd efi fuel pumps.............$100.00 each

msc 91 convertable parts, air bag, turn signal switch, visors,ignition switch


fully built pinned bridgeported 13B 4 port( early type) 3mm apex seals new rotor hsgs, all new seals and springs, new oil o-rings and carriers, one year warranty $3,800

os geiken clutch/ flywheel setup, like new twin plate style for turbo 2 $800.00

os geiken clutch flywheel setup, missing pressure plate twin plate style for turbo 2 $300.00

[Whizbang]

ooooo....i need to get the next two paychecks in. Would you take like 50% down to hold an item for another two weeks?

[730RWHP12A]

ooooo....i need to get the next two paychecks in. Would you take like 50% down to hold an item for another two weeks?

you dont need a deposit, i will hold an item for ya :)

[Whizbang]

I want / need the clutch/flywheel for the turbo 2. Does it come with the counterweight?

[730RWHP12A]

I want / need the clutch/flywheel for the turbo 2. Does it come with the counterweight?

if i have the right counterweight ill throw it in.

[SpooledupRacing]

I know its not on here but I figured I would ask..

drivers rear speaker cover/grill with no breaks/cracks

[turbovert91]

Any other vert parts? Specifically the bracket/capacitors for the airbag system?

[730RWHP12A]

Any other vert parts? Specifically the bracket/capacitors for the airbag system?

do you mean the sensors that mount to the core support? air bag control module is sold

[turbovert91]

Not sure, I'm talking about the blue boxes attached to a bracket on the steering column under the dash...here's a pic of one:

http://i4.photobucket.com/albums/y120/miltstheman/Vertairbagcapacitor.jpg

[730RWHP12A]

ill look for it. thanks for the pic!

[Whizbang]

you dont need a deposit, i will hold an item for ya :)

motor blew in the turbo II today, so i guess this is no longer on my list.

[730RWHP12A]

motor blew in the turbo II today, so i guess this is no longer on my list.

oh, no!! thats no good.
i have used motors too :)

[3rd and final 7]

Hey Robert if you have a TII ACV how much would that be?

[730RWHP12A]

Hey Robert if you have a TII ACV how much would that be?

yes $25.00 shipped. a pic of the exact acv valve you want to replace would be great as there are some minor differences.

[3rd and final 7]

i dont have the ACV it self bc i bought the intake mani w/o it but if a pic of the mani will help as far as which one that i have?

[730RWHP12A]

i dont have the ACV it self bc i bought the intake mani w/o it but if a pic of the mani will help as far as which one that i have?

perfect

[3rd and final 7]

heres pics of the intake mani, im not sure exactly what part of the intake you need so if you need a different pic let me know. also what will it cost for a s4 tii boost sensor?

[730RWHP12A]

heres pics of the intake mani, im not sure exactly what part of the intake you need so if you need a different pic let me know. also what will it cost for a s4 tii boost sensor?

ok, i have that one.. no boost sensors at the moment, sorry
my paypal address is robert@rotaryshack.com

[3rd and final 7]

i will send the payment through tonight i have to transfer money over. (and let my wife know LOL)

[3rd and final 7]

ok payment made but i put choose the wrong address on paypal im giong to send you a pm with the right address

[3rd and final 7]

Got everything today, thank you. super fast shipping , awesome customer service!

[Whizbang]

what is the total weight of the os clutch / flywheel combo? i have the funds but im stuck on maybe getting the Guru.

[Whizbang]

found it, seems pretty light. i think ill opt for the OS then. Give me a week or so.

[730RWHP12A]

what is the total weight of the os clutch / flywheel combo? i have the funds but im stuck on maybe getting the Guru.



wich one were you interested in? the complete one or the one missing the pressure plate? i was gonna weigh the complete unit but you beat me to it.

[Whizbang]

complete one. os says its around 11kg

[730RWHP12A]

complete one. os says its around 11kg


ok, ill knock $100 off the asking price for you too and free shipping :)
just to sweeten up the deal

[Whizbang]

sounds great!

also did you get my email regarding T5 adapters?

[730RWHP12A]

sounds great!

also did you get my email regarding T5 adapters?

no, ill check my junk mail.. when did you send it?

[Whizbang]

last night

[Whizbang]

ran into an interesting issue that im talking to OS about. I want to run a T5 behind the engine, but to do so i need a clutch splined to work with the T5 (either 10spline or 26 spline in there certain diameter). They might have something for the 26 spline that could work. Still sorting it out. Hopefully, they have replacement clutches that will work! That would be a great combination.

[vex]

Do you by chance have any S4 NA Fuel Rails? I need both primary and secondary (at the very least primary)

[3rd and final 7]

Hey Robert how much for good non modified S4 turbo mani, the i have i was just over looking at it and its pretty baddly cracked shipping to 94503

[730RWHP12A]

Hey Robert how much for good non modified S4 turbo mani, the i have i was just over looking at it and its pretty baddly cracked shipping to 94503

$120.00 shipped, the scroll door has been removed and the manifold is coated.

[dg1424]

do you still have the 85 12a? i just tore apart mine and both housings and a rotor are trashed.

[730RWHP12A]

do you still have the 85 12a? i just tore apart mine and both housings and a rotor are trashed.

yes, i have several running 12A motors for sale

[dg1424]

could i get a price for a good 12a and shipping to 61554 IL

[730RWHP12A]

could i get a price for a good 12a and shipping to 61554 IL

$600.00 shipped

[sonnytalfred]

what is the lowest you will do on the nikki carb.i am on a bubget trying to do a 12a turbo or call me at 281-832-3567

[sonnytalfred]

what is the lowest you will do on the nikki carb. i am on a budget trying to do a 12a turbo. or you can call at 281-832-3567:

[730RWHP12A]

what is the lowest you will do on the nikki carb. i am on a budget trying to do a 12a turbo. or you can call at 281-832-3567:

$320.00 shipped

[3rd and final 7]

Hey Rob you got a complete S4 turbo heat shield for the turbo!?

[730RWHP12A]

Hey Rob you got a complete S4 turbo heat shield for the turbo!?

yes i do sir. $30.00 shipped

[3rd and final 7]

sweet i ll send you payment in the morning

Thank You Sir!

[Jeezus]

Hey Rob, gave you a call today but you didn't answer. Give me a call sometime today please, I need to get the carburetor on and it is taking forever to get it.

[730RWHP12A]

Hey Rob, gave you a call today but you didn't answer. Give me a call sometime today please, I need to get the carburetor on and it is taking forever to get it.

you get it yet? you should have gottenit a long time ago:driving:

[730RWHP12A]

this page will be getting updated this week guys. check back for some smokin deals!

[730RWHP12A]

updated