Huge Partout! S5 FC TII - HBP- Tons of NICE/QUALITY/AFTERMARKET parts

[Comitatus]

A seal let go in my motor, and my luck, pride, and wallet can no longer handle it. So I'm sad to say, that I'm parting out my beloved machine.

This car recently tuned on low boost made 369whp @ 14psi on a DynoDynamics dyno. That is about 435whp on a dynojet. The best 1/4 mile time I ran in this car was a 12.0 @ 120.93mph. That was last year on a different tune and 12psi. This year my first pass in the car netted a 12.4 @ 122mph which boost gauge read 13psi, launching easy/ 2.4 sec 60'. I know this car had a high 11 second pass @ 123-124 mph on low boost/street tires.

I have owned this car for almost 5 years. I bought the car with 109K miles on the odometer. It now has just over 112k miles. The motor was freshly built on 8/10/08. I put about 700 miles on this motor before the seal went. Clean title. Registered in Ohio.

I have a HUGE list of parts that are on this car. I'll do my best to take pictures of everything, so please be patient if I don't have one up right away.

All of these parts are either new, like new, or have a very small amount of mileage on them. I'm pricing everything to sell because I want this stuff gone. My loss is your gain. I'd like to sell the big stuff locally to stay away from shipping, but I will ship items at the buyer's expense.

I can do Paypal, but buyer will need to add 4% to the total cost to cover fees.

Prices listed in RED, and does not include shipping. If you want to buy multiple things, I'm willing to wheel and deal.

Located in Cincinnati, OH 45241.

Engine

Motor is torn down currently.
Selling complete shortblock AS IS with following parts (last rebuild)- $1,500
• S5 TII FC3S ShortBlock
• Half Bridgeport Irons by BDC Motorsports
• Ported Rotor Housings by BDC Motorsports
• Atkins 2mm Apex Seals
• OEM Mazda 2mm Apex Seal Springs
• Mazda OEM “O-ring kit”
• New OEM Oil Pump Chain
• New OEM Stationary (main) Gear Bearings
• New OEM Rotor Bearings
• New OEM Side Seals and FD Springs
• New OEM Thrust Bearings
• New OEM Oil Control Ring Springs Kit
• Solid Corner Seals and Competition “Race” Springs
• Later/Thicker Cast Dowel Land Rear S5TII Plate
• New OEM Front Plate (Thick Dowel Land)
• New OEM Dowel Pins
• FD Oil Pressure Regulator
• Racing Beat Oil Pan Baffle Plate
• New Water Pump & OEM T-Stat



• Banzai Racing Oil Pan Brace & Stud Kit - $110
• Mazdatrix Oil Filter Pedestal - SOLD
• Powder Coated FD UIM and Polished TB - $375 includes S5 LIM, spacer, and hardware
• Custom Port Matched FD UIM to FC LIM Spacer
• Modified Greddy TB Elbow - $80
• Mazda Racing Competition Pulley Set - $175 - Has Rare Earth Magnets in Crank Pulley
• New FD Alternator - $100
• Banzai Racing Polyurethane Motor Mounts - $100

Transmission
• ACT HD Pressure Plate - SOLD
• ACT 6 Puck Un-sprung Clutch Disc - SOLD
• ACT StreetLite Flywheel - $210
• Banzai Racing Polyurethane Transmission Mounts - $35

Cooling
• Koyo Aluminum Radiator - $300
• Black Magic Extreme E-fan - $275
• Samco Sport Coolant Hoses - $90
• Racing Beat Stainless Braided Oil Cooler Lines - SOLD
• Yonaka 26x12x3 Core Intercooler $275
• 4” Turbo Intake Pipe - $30
• K&N Cone Filter - $30 - 4" filter
• Custom IC Piping - 2.5” Turbo side & 3” Intake side - Powder Coated - $175

Exhaust
• Linder Power Systems Custom Divided Manifold (Ceramic Coated) - $800
• Dual SS EGT bungs (1 per Runner)
• Linder Power Systems Custom 3" to 3.5” Downpipe (Ceramic Coated) - $300
• Dual Tial 38mm Wastegates - 11.5psi springs - $200 per WG
• Custom 3.5” Stainless Steel Single Exit Exhaust - $800
• Borla XR-1 Oval mid-muffler
• Magnaflow Race Series rear muffler

Turbo
• Polished Garrett T04R w/ P-trim Exhaust Wheel - $700
• Divided 1.32 A/R Exhaust Housing (HPC Coated)
• 3” V-band Exit
• -4AN Stainless Braided Oil Feed -$100 for both feed/drain lines w/ flanges.
• -12AN Stainless Braided Oil Drain
• Gotham Racing Turbo Blanket - $125

Fuel

Fuel Kit (no injectors or pump) - SOLD
• KG Parts FC Fuel Rails - SOLD
• Aeromotive 10 Micron Fuel Filter - SOLD
• Aeromotive A1000 FPR - SOLD
• Marren Fuel Pulsation Damper - SOLD
• -6AN Stainless Braided Lines w/ Earl’s Aluminum Fittings (fuel filter forward) - SOLD

• 2 x 720cc Siemen Deka Injectors - $120 - Pending Sale
• 2 x 1680cc Bosch Injectors - $150


Ignition
• BMEP IGN-1A Coils - $320 including custom Magnecor wires
• Custom Magnecor R100 10mm Plug Wires
• NGK R6725-105’s - $80 Excellent Condition

Electronics
• Haltech S3 Hall Effect Sensor - $200 includes custom bracket
• Custom Hall Effect Sensor Mounting Bracket by Ludwig Motorsports
• Turbosmart E-boost 2 60psi Boost Controller w/ twin LED ring - $450 including dual solenoids and LED ring
• Dual E-boost Solenoids (1 per WG)
• Innovate Motorsports LC-1 Wideband - $340 - Includes XD-16 Air/Fuel Guage
• Innovate Motorsports XD-16 Air/Fuel Gauge
• Optima Red Top Battery - $80
• Greddy Turbo Timer - $90
• Greddy FC RX7 Turbo Timer Harness - $10

Suspension
• Energy Suspension Full Bushing Set - Black - $100/Brand new, still in Box

Brakes
• Brembo Blank Rotors – Slotted, Dimpled & Zinc Coated - $200 for front and rear
• Hawk HPS Brake Pads - $75 F/R
• Mazdatrix Stainless Steel Brake Lines - $70


Gauges
• Defi Link Meter 60mm Oil Pressure - $200
• Defi Link Meter 60mm Exhaust Gas Temperature - $200
• Defi Link Meter 52mm Fuel Pressure - $190
• Defi Link Meter 52mm Oil Temperature - $150
• Defi Link Meter 52mm Water Temperature - $150
• Defi Link Meter 80mm Tachometer w/ Link Indicator Light - $150
• Defi Control Unit II - $100


Interior
• Corbeau FX1 Pro Seat - $200
• Corbeau 3” 5 Point Cam-Lock Harness - $120
• AutoPower 4 point Roll Bar w/ Diagonal Brace & Harness Bar - $400 - Pick up Only
• AutoVation Aluminum FC3S Pedals - $75
• Voodoo Racing Shift Knob - $30
• Speed Machine Performance Carbon Fiber Radio Surround - $100
• Speed Machine Performance Carbon Fiber Dual Gauge Pod - $150


Miscellaneous
• Tial 50mm BOV - $200
• Remote Terminals Installed in Engine Bay - $15
• Jazz Vented Oil Breather - $60
• Jazz Recirculating Coolant Overflow - $20

Exterior
• ShineAutoProject Carbon Fiber Sexy Style Vented Hood - $650
• Sparco Polished Aluminum Hood Pins - $35 Brand New - Still in Package

Alcohol Injection
• Custom Progressive Alkycontrol.com kit - $650 - will include 4 gallons of methanol
• Twin M10 nozzles
• 1 gallon JAZZ fuel cell - modified for pure alcohol
• Pump modified for pure alcohol
• SS braided lines
• PAC controller
• Check Valve
• Low Level LED and Injection Indicator LED



http://i269.photobucket.com/albums/jj50/ComitatusRX7/DSCF0160.jpg

http://i269.photobucket.com/albums/jj50/ComitatusRX7/DSCF0161.jpg

http://i269.photobucket.com/albums/jj50/ComitatusRX7/DSCF0166.jpg

http://i269.photobucket.com/albums/jj50/ComitatusRX7/DSCF0167.jpg

http://i269.photobucket.com/albums/jj50/ComitatusRX7/DSCF0040-2.jpg

http://i269.photobucket.com/albums/jj50/ComitatusRX7/DSCF0035-3.jpg

http://i269.photobucket.com/albums/jj50/ComitatusRX7/DSCF0036-5.jpg

http://i269.photobucket.com/albums/jj50/ComitatusRX7/DSCF0036-2.jpg

[djmtsu]

How much for the meshies??

[Whizbang]

would you be willing to ship a larger item (namely the seat and bracket). obviously i would be paying shipping

[SpooledupRacing]

If I run into some cash soon I will be snagging up a hand full orf parts..

[Comitatus]

How much for the meshies??

Not sure I'm selling those just yet, I'd have to find 2 other spare tire wheels so I could keep the chassis a rolling shell.

They have 225/50/16 Kumho Ecsta SPT's on them. Like new with only 3K easy miles on them (breaking in the motor/s)

Probably $500 for wheels and tires.

[Comitatus]

would you be willing to ship a larger item (namely the seat and bracket). obviously i would be paying shipping

Shouldn't be an issue if I can find a box.

[RotaryXperiment]

got videos of it running?

[Whizbang]

how did the seat sit? any lower than stock?

[Comitatus]

got videos of it running?

What do you mean?:confused:

[Comitatus]

how did the seat sit? any lower than stock?

Yep. A couple inches at least, hence the custom made bracket. I also have the Corbeau Sliding Double Lock bracket if you'd want that instead.

I'm 6'4" if that gives you an idea.

[Whizbang]

real interested now. im 6'1"

[turbovert91]

I'm interested in the Banzai oil pan brace kit if you'll go lower. Brand new ones are $125 shipped, hardly more than your $110+shipping would cost...



I'd also like your NGKs and possibly the K&N, do you have pictures of these? How many miles are on the plugs?

[Phoenix7]

I'm interested in the:
oil pedestal
Oil cooler lines

[Comitatus]

real interested now. im 6'1"

Would probably work very well for you then. Let me know.


I'm interested in the Banzai oil pan brace kit if you'll go lower. Brand new ones are $125 shipped, hardly more than your $110+shipping would cost...



I'd also like your NGKs and possibly the K&N, do you have pictures of these? How many miles are on the plugs?

The pan brace is pretty much new. Was on the car for 2 months (700 miles). I can ship that single piece for $5. I'll do $110 shipped for it.

I can get pictures of the K&N and NGK's shortly. Filter has about 1K miles on it, NGK's probably a total of couple hundred (used very little).

$110 for NGK's and Filter.

How does $225 shipped for everything sound?


I'm interested in the:
oil pedestal
Oil cooler lines

How about $160 shipped?

[Comitatus]

Greddy Turbo Timer - $90
Greddy FC RX7 Turbo Timer Harness - $10

[Whizbang]

Would probably work very well for you then. Let me know.




The pan brace is pretty much new. Was on the car for 2 months (700 miles). I can ship that single piece for $5. I'll do $110 shipped for it.

I can get pictures of the K&N and NGK's shortly. Filter has about 1K miles on it, NGK's probably a total of couple hundred (used very little).

$110 for NGK's and Filter.

How does $225 shipped for everything sound?




How about $160 shipped?

once i get paid here in the next week or so well be in buisness. Do you do paypal i hope?

[Comitatus]

once i get paid here in the next week or so well be in buisness. Do you do paypal i hope?

Sounds good. I don't have the seat bracket prices listed, but we can work something out.

Yes, paypal accepted as long as fees are covered.

Talk to you soon!

[Whizbang]

Sounds good. I don't have the seat bracket prices listed, but we can work something out.

Yes, paypal accepted as long as fees are covered.

Talk to you soon!

cool deal. As far as a box goes, you can always make a box from a few other boxes.

[turbovert91]

The pan brace is pretty much new. Was on the car for 2 months (700 miles). I can ship that single piece for $5. I'll do $110 shipped for it.

I can get pictures of the K&N and NGK's shortly. Filter has about 1K miles on it, NGK's probably a total of couple hundred (used very little).

$110 for NGK's and Filter.

How does $225 shipped for everything sound?

OK, I'll wait for the pics though, especially of the plug bottoms. Is the filter a short or long one? Is it open or capped on the end?

[Phoenix7]

160 sounds good. Lemme look through your list and I'll PM you in a bit.

[Comitatus]

160 sounds good. Lemme look through your list and I'll PM you in a bit.

PM'd back.

[Phoenix7]

a quick question....which oil pedestal do you have? I know mazdatrix has a few for sale....

Also, what's your paypal?

[Comitatus]

a quick question....which oil pedestal do you have? I know mazdatrix has a few for sale....

Also, what's your paypal?


Here is the Pedestal.

http://i269.photobucket.com/albums/jj50/ComitatusRX7/th_DSCF0227.jpg (http://s269.photobucket.com/albums/jj50/ComitatusRX7/?action=view&current=DSCF0227.jpg)

Pm'd you, will send another with the paypal info.

[Comitatus]

OK, I'll wait for the pics though, especially of the plug bottoms. Is the filter a short or long one? Is it open or capped on the end?

Here are some pics of the plugs and Filter. I'm trying to remember the exact part number for the K&N.

http://i269.photobucket.com/albums/jj50/ComitatusRX7/th_DSCF0228.jpg (http://s269.photobucket.com/albums/jj50/ComitatusRX7/?action=view&current=DSCF0228.jpg)

http://i269.photobucket.com/albums/jj50/ComitatusRX7/th_DSCF0223.jpg (http://s269.photobucket.com/albums/jj50/ComitatusRX7/?action=view&current=DSCF0223.jpg)

http://i269.photobucket.com/albums/jj50/ComitatusRX7/th_DSCF0224.jpg (http://s269.photobucket.com/albums/jj50/ComitatusRX7/?action=view&current=DSCF0224.jpg)


Click for a bigger pic...

[Comitatus]

Phoenix7 - You PM box is full.

$180 for just the XD-16 guage.

[Comitatus]

CAS Cover - Sold
Haltech - Sold
Supra Pump - Sold

Gretty TT FC RX7 Harness - Back up for sale

[SpooledupRacing]

selling the interior, if so how much for:
drivers rear speaker cover/grille
door sils
A pilliars
plasti that wraps around to the back of the hatch carpet

no breaks, cracks, missing clips

shipping to 49321

[Comitatus]

selling the interior, if so how much for:
drivers rear speaker cover/grille
door sils
A pilliars
plasti that wraps around to the back of the hatch carpet

no breaks, cracks, missing clips

shipping to 49321

I think I'm going to keep the factory interior with the shell for now. If that decision changes, I'll let everyone know.

[Phoenix7]

cleaned out the inbox, sorry comitatus....I'll pass on the gauge but will take you up on the oil lines and pedestal.

Expect payment soon.

[Comitatus]

cleaned out the inbox, sorry comitatus....I'll pass on the gauge but will take you up on the oil lines and pedestal.

Expect payment soon.

No problem. I'll put your name on the oil lines and pedestal.

Thanks.

[Comitatus]

ACT Clutch/6 Puck Disc - SOLD

Remote Terminals - SOLD

[Phoenix7]

Payment sent. Thank you.

[Comitatus]

Payment sent. Thank you.

Thanks! Will ship today.

[Comitatus]

RB Oil Cooler Lines - SOLD

Mazdatrix Oil Filter Pedestal - SOLD

[Comitatus]

Fuel Kit - SOLD
• KG Parts FC Fuel Rails
• Aeromotive 10 Micron Fuel Filter
• Aeromotive A1000 FPR
• Marren Fuel Pulsation Damper
• -6AN Stainless Braided Lines w/ Earl’s Aluminum Fittings (fuel filter forward)



Garrett T04R - SALE PENDING

[Comitatus]

CF Radiator Panel - SOLD

Corbeau Harness - SOLD

[Comitatus]

AlkyControl kit - SOLD

[Comitatus]

FD Alt - $100

Buyer fell through, so back up for sale!

[Comitatus]

Here is what's left:


I can do Paypal, but buyer will need to add 4% to the total cost to cover fees.

Prices listed in RED, and does not include shipping. If you want to buy multiple things, I'm willing to wheel and deal.

Located in Cincinnati, OH 45241.

Engine

Motor is torn down currently.
Selling complete shortblock AS IS with following parts (last rebuild)- $1,500
• S5 TII FC3S ShortBlock
• Half Bridgeport Irons by BDC Motorsports
• Ported Rotor Housings by BDC Motorsports
• Atkins 2mm Apex Seals
• OEM Mazda 2mm Apex Seal Springs
• Mazda OEM “O-ring kit”
• New OEM Oil Pump Chain
• New OEM Stationary (main) Gear Bearings
• New OEM Rotor Bearings
• New OEM Side Seals and FD Springs
• New OEM Thrust Bearings
• New OEM Oil Control Ring Springs Kit
• Solid Corner Seals and Competition “Race” Springs
• Later/Thicker Cast Dowel Land Rear S5TII Plate
• New OEM Front Plate (Thick Dowel Land)
• New OEM Dowel Pins
• FD Oil Pressure Regulator
• Racing Beat Oil Pan Baffle Plate
• New Water Pump & OEM T-Stat


Misc. Engine
• Banzai Racing Oil Pan Brace & Stud Kit - $110
• Powder Coated FD UIM and Polished TB - $375 includes S5 LIM, spacer, and hardware
• Custom Port Matched FD UIM to FC LIM Spacer
• Mazda Racing Competition Pulley Set - $175 - Has Rare Earth Magnets in Crank Pulley


Transmission
• ACT StreetLite Flywheel - $210


Cooling
• Koyo Aluminum Radiator - $300
• Black Magic Extreme E-fan - $275
• Samco Sport Coolant Hoses - $90
• Yonaka 26x12x3 Core Intercooler $275
• 4” Turbo Intake Pipe - $30
• K&N Cone Filter - $30 - 4" filter
• Custom IC Piping - 2.5” Turbo side & 3” Intake side - Powder Coated - $175


Exhaust
• Linder Power Systems Custom Divided Manifold (Ceramic Coated) - $800
• Dual SS EGT bungs (1 per Runner)
• Linder Power Systems Custom 3" to 3.5” Downpipe (Ceramic Coated) - $300
• Dual Tial 38mm Wastegates - 11.5psi springs - $200 per WG
• Custom 3.5” Stainless Steel Single Exit Exhaust - $800
• Borla XR-1 Oval mid-muffler
• Magnaflow Race Series rear muffler


Turbo
• -4AN Stainless Braided Oil Feed -$100 for both feed/drain lines w/ flanges.
• -12AN Stainless Braided Oil Drain
• Gotham Racing Turbo Blanket - $125


Fuel
• 2 x 720cc Siemen Deka Injectors - $120 - Pending Sale
• 2 x 1680cc Bosch Injectors - $150


Ignition
• BMEP IGN-1A Coils - $320 including custom Magnecor wires
• Custom Magnecor R100 10mm Plug Wires
• NGK R6725-105’s - $80 Excellent Condition


Electronics
• Haltech S3 Hall Effect Sensor - $200 includes custom bracket
• Custom Hall Effect Sensor Mounting Bracket by Ludwig Motorsports
• Optima Red Top Battery - $80
• Greddy Turbo Timer - $90
• Greddy FC RX7 Turbo Timer Harness - $10


Suspension
• Energy Suspension Hyper-Flex Full Bushing Set - Black - $100/Brand new, still in Box


Brakes
• Brembo Blank Rotors – Slotted, Dimpled & Zinc Coated - $200 for front and rear
• Hawk HPS Brake Pads - $75 F/R


Gauges
Complete set - $1,100

• Defi Link Meter 60mm Oil Pressure - $200
• Defi Link Meter 60mm Exhaust Gas Temperature - $200
• Defi Link Meter 52mm Fuel Pressure - $190
• Defi Link Meter 52mm Oil Temperature - $150
• Defi Link Meter 52mm Water Temperature - $150
• Defi Link Meter 80mm Tachometer w/ Link Indicator Light - $150
• Defi Control Unit II - $100


Interior
• Corbeau FX1 Pro Seat - $200
• Corbeau Sliding Dual Lock Driver's Side Bracket - $60
• AutoPower 4 point Roll Bar w/ Diagonal Brace & Harness Bar - $400 - Pick up Only
• AutoVation Aluminum FC3S Pedals - $75
• Speed Machine Performance Carbon Fiber Dual Gauge Pod - $150
• Tekniq Auto Suede Wheel/Hub/Snap-Lock System - $315


Miscellaneous
• Tial 50mm BOV - $200
• Jazz Vented Oil Breather - $60


Exterior
• ShineAutoProject Carbon Fiber Sexy Style Vented Hood - $650
• Sparco Polished Aluminum Hood Pins - $35 Brand New - Still in Package

[mazda_wes]

front clip and headlights? trade + cash?

[Comitatus]

front clip and headlights? trade + cash?

Looking for Cash only, my friend. There are a couple people in line for the front end and lights if the buyer of the shell does not want it.

[Comitatus]

Here is what's left, PICS available on request. (Some Prices Reduced)


I can do Paypal, but buyer will need to add 4% to the total cost to cover fees.

Prices listed in RED, and does not include shipping. If you want to buy multiple things, I'm willing to wheel and deal.

Located in Cincinnati, OH 45241.

Engine

Motor is torn down currently. It is perfectly fine, just needs apex seals and O-ring kit to be rebuilt.
Selling complete shortblock AS IS with following parts (last rebuild)- $1,500
• S5 TII FC3S ShortBlock
• Half Bridgeport Irons by BDC Motorsports
• Ported Rotor Housings by BDC Motorsports
• OEM Mazda 2mm Apex Seal Springs
• New OEM Oil Pump Chain
• New OEM Stationary (main) Gear Bearings
• New OEM Rotor Bearings
• New OEM Side Seals and FD Springs
• New OEM Thrust Bearings
• New OEM Oil Control Ring Springs Kit
• Solid Corner Seals and Competition “Race” Springs
• Later/Thicker Cast Dowel Land Rear S5TII Plate
• New OEM Front Plate (Thick Dowel Land)
• New OEM Dowel Pins
• FD Oil Pressure Regulator
• Racing Beat Oil Pan Baffle Plate
• New Water Pump & OEM T-Stat


Misc. Engine
• Banzai Racing Oil Pan Brace & Stud Kit - $110
• Powder Coated FD UIM and Polished TB w/ TPS - $225
• Mazda Racing Competition Pulley Set - $175 - Has Rare Earth Magnets in Crank Pulley for Hall Effect Sensor


Transmission
• ACT StreetLite Flywheel - $210


Cooling
• Koyo Aluminum Radiator - $275
• Black Magic Extreme E-fan - $250
• Samco Sport Coolant Hoses - $80
• Yonaka 26x12x3 Core Intercooler $250
• 4” Turbo Intake Pipe - $30
• K&N Cone Filter - $30 - 4" filter
• Custom IC Piping - 2.5” Turbo side & 3” Intake side - Powder Coated - $175


Exhaust
• Linder Power Systems Custom Divided Manifold (Ceramic Coated) - $750
• Dual SS EGT bungs (1 per Runner)
• Linder Power Systems Custom 3" to 3.5” Downpipe (Ceramic Coated) - $250
• Dual Tial 38mm Wastegates - 11.5psi springs - $185 per WG
• Custom 3.5” Stainless Steel Single Exit Exhaust (built with mufflers below) - $775
• Borla XR-1 Oval mid-muffler
• Magnaflow Race Series rear muffler


Turbo

• Gotham Racing Turbo Blanket - $115



Ignition
• BMEP IGN-1A Coils (try to find a better coil for the money) - $320 including custom Magnecor wires
• Custom Magnecor R100 10mm Plug Wires
• NGK R6725-105’s - $75 Excellent Condition


Electronics
• Haltech S3 Hall Effect Sensor - $200 includes custom bracket
• Custom Hall Effect Sensor Mounting Bracket by Ludwig Motorsports
• Optima Red Top Battery - $80
• Greddy Turbo Timer - $80
• Greddy FC RX7 Turbo Timer Harness - $10


Suspension
• Energy Suspension Hyper-Flex Full Bushing Set - Black - $100/Brand new, still in Box


Brakes
• Brembo Blank Rotors – Slotted, Dimpled & Zinc Coated - $200 for front and rear
• Hawk HPS Brake Pads - $75 F/R


Gauges
Complete set - $1,100

• Defi Link Meter 60mm Oil Pressure - $200
• Defi Link Meter 60mm Exhaust Gas Temperature - $200
• Defi Link Meter 52mm Fuel Pressure - $190
• Defi Link Meter 52mm Oil Temperature - $150
• Defi Link Meter 52mm Water Temperature - $150
• Defi Link Meter 80mm Tachometer w/ Link Indicator Light - $150
• Defi Control Unit II - $100


Interior
• Corbeau FX1 Pro Seat - $200
• Corbeau Sliding Dual Lock Driver's Side Bracket - $60
• AutoPower 4 point Roll Bar w/ Diagonal Brace & Harness Bar - $400 - Pick up Only
• AutoVation Aluminum FC3S Pedals - $70
• Speed Machine Performance Carbon Fiber Dual Gauge Pod - $135
• TekniqAuto Suede Wheel/Hub/Snap-Lock System - $315


Miscellaneous
• Tial 50mm BOV - $200
• Jazz Vented Oil Breather - $60


Exterior
• ShineAutoProject Carbon Fiber Sexy Style Vented Hood - $650
• Sparco Polished Aluminum Hood Pins - $35 Brand New - Still in Package

[RotaryXperiment]

ill take 4" intake with tbolt clamps 30 shipped, pm me if interested

[Comitatus]

ill take 4" intake with tbolt clamps 30 shipped, pm me if interested

PM'd.

[Comitatus]

Pics:

Manifold, DP, and WG's

http://i269.photobucket.com/albums/jj50/ComitatusRX7/DSCF0193-1.jpg

http://i269.photobucket.com/albums/jj50/ComitatusRX7/Picture_159.jpg

http://i269.photobucket.com/albums/jj50/ComitatusRX7/DSCF0216.jpg

http://i269.photobucket.com/albums/jj50/ComitatusRX7/DSCF0195.jpg

http://i269.photobucket.com/albums/jj50/ComitatusRX7/DSCF0198.jpg


IC and piping:

http://i269.photobucket.com/albums/jj50/ComitatusRX7/DSCF0254.jpg


Coils and Wires:

http://i269.photobucket.com/albums/jj50/ComitatusRX7/DSCF0036-2.jpg

http://i269.photobucket.com/albums/jj50/ComitatusRX7/DSCF0035-1.jpg


Banzai Oil Pan Brace:

http://i269.photobucket.com/albums/jj50/ComitatusRX7/DSCF0044.jpg


ACT Streetlite Flywheel:

http://i269.photobucket.com/albums/jj50/ComitatusRX7/DSCF0038-3.jpg


Greddy TT and FC plug n play harness:

http://i269.photobucket.com/albums/jj50/ComitatusRX7/DSCF0214.jpg

http://i269.photobucket.com/albums/jj50/ComitatusRX7/DSCF0213.jpg


K&N filter - 4"

http://i269.photobucket.com/albums/jj50/ComitatusRX7/DSCF0224.jpg


Steering Wheel, Street Lock, and Hub system:

http://i269.photobucket.com/albums/jj50/ComitatusRX7/DSCF0244.jpg

http://i269.photobucket.com/albums/jj50/ComitatusRX7/DSCF0245-1.jpg

http://i269.photobucket.com/albums/jj50/ComitatusRX7/DSCF0246.jpg

http://i269.photobucket.com/albums/jj50/ComitatusRX7/DSCF0248.jpg



Custom SS Exhaust:

http://i269.photobucket.com/albums/jj50/ComitatusRX7/DSCF0164.jpg


Haltech Hall Effect Sensor and Custom Mount:

http://i269.photobucket.com/albums/jj50/ComitatusRX7/P1010035.jpg

[Comitatus]

LIM and Bushing Kit - SOLD

Mazda Racing Pulley Set - SOLD

[Comitatus]

Haltech Hall Effect Sensor and Custom Bracket - SOLD

[TehMonkay]

Hall effect sensor come with pulley?

[Comitatus]

Hall effect sensor come with pulley?

Sorry, both have been sold.

[Boostmaniac]

That really looked like Ludwig's setup for hall effect.

[Comitatus]

That really looked like Ludwig's setup for hall effect.

Yep, he made it. Worked very well.

[Comitatus]

1-15-2009

Here is what's left, PICS available on request. (Some Prices Reduced)


I can do Paypal, but buyer will need to add 4% to the total cost to cover fees.

Prices listed in RED, and does not include shipping. If you want to buy multiple things, I'm willing to wheel and deal.

Located in Cincinnati, OH 45241.

Engine

Motor is torn down currently. It is perfectly fine, just needs apex seals and O-ring kit to be rebuilt.
Selling complete shortblock AS IS with following parts (last rebuild)- $1,500
• S5 TII FC3S ShortBlock
• Half Bridgeport Irons by BDC Motorsports
• Ported Rotor Housings by BDC Motorsports
• OEM Mazda 2mm Apex Seal Springs
• New OEM Oil Pump Chain
• New OEM Stationary (main) Gear Bearings
• New OEM Rotor Bearings
• New OEM Side Seals and FD Springs
• New OEM Thrust Bearings
• New OEM Oil Control Ring Springs Kit
• Solid Corner Seals and Competition “Race” Springs
• Later/Thicker Cast Dowel Land Rear S5TII Plate
• New OEM Front Plate (Thick Dowel Land)
• New OEM Dowel Pins
• FD Oil Pressure Regulator
• Racing Beat Oil Pan Baffle Plate
• New Water Pump & OEM T-Stat


Misc. Engine
• Powder Coated FD UIM and Polished TB w/ TPS - $225


Transmission
• ACT StreetLite Flywheel - $210


Cooling
• Koyo Aluminum Radiator - $275
• Black Magic Extreme E-fan - $250
• Samco Sport Coolant Hoses - $80
• Yonaka 26x12x3 Core Intercooler $250
• 4” Turbo Intake Pipe - $30
• K&N Cone Filter - $30 - 4" filter
• Custom IC Piping - 2.5” Turbo side & 3” Intake side - Powder Coated - $175


Exhaust
• Linder Power Systems Custom Divided Manifold (Ceramic Coated) - $750 - PENDING SALE
• Dual SS EGT bungs (1 per Runner)
• Linder Power Systems Custom 3" to 3.5” Downpipe (Ceramic Coated) - $250
• Dual Tial 38mm Wastegates - 11.5psi springs - $185 per WG - PENDING SALE
• Custom 3.5” Stainless Steel Single Exit Exhaust (built with mufflers below) - $775
• Borla XR-1 Oval mid-muffler
• Magnaflow Race Series rear muffler


Turbo

• Gotham Racing Turbo Blanket - $115



Ignition
• BMEP IGN-1A Coils (try to find a better coil for the money) - $320 including custom Magnecor wires
• Custom Magnecor R100 10mm Plug Wires
• NGK R6725-105’s - $75 Excellent Condition


Electronics
• Optima Red Top Battery - $80
• Greddy Turbo Timer - $80
• Greddy FC RX7 Turbo Timer Harness - $10



Gauges
Complete set - $1,100 OBO

• Defi Link Meter 60mm Oil Pressure - $200
• Defi Link Meter 60mm Exhaust Gas Temperature - $200
• Defi Link Meter 52mm Fuel Pressure - $190
• Defi Link Meter 52mm Oil Temperature - $150
• Defi Link Meter 52mm Water Temperature - $150
• Defi Link Meter 80mm Tachometer w/ Link Indicator Light - $150
• Defi Control Unit II - $100


Interior
• Corbeau FX1 Pro Seat - $200
• Corbeau Sliding Dual Lock Driver's Side Bracket - $60
• AutoPower 4 point Roll Bar w/ Diagonal Brace & Harness Bar - $400 - Pick up Only
• Speed Machine Performance Carbon Fiber Dual Gauge Pod - $135
• TekniqAuto Suede Wheel/Hub/Snap-Lock System - $315


Miscellaneous
• Tial 50mm BOV - $200


Exterior
• ShineAutoProject Carbon Fiber Sexy Style Vented Hood - $650
• Sparco Polished Aluminum Hood Pins - $35 Brand New - Still in Package