ITBs for my half bridge. Yes, this post has pics

[-xlr8planet-]

:rofl:

This are ITBs from a CBR600RR

Surprise, they came with

- TPS
- MAP
- WAX ROD (for cold idle)
- Manual Adjustment knob, for idle.
- 8 denso 12 holes injectors (I believe they are 190cc each)

This babies are the shitza!

http://www.importracer.com.ar/ftp/gaby/14092008661.jpg
http://www.importracer.com.ar/ftp/gaby/14092008662.jpg
http://www.importracer.com.ar/ftp/gaby/14092008663.jpg
http://www.importracer.com.ar/ftp/gaby/14092008664.jpg
http://www.importracer.com.ar/ftp/gaby/14092008665.jpg
http://www.importracer.com.ar/ftp/gaby/14092008666.jpg
http://www.importracer.com.ar/ftp/gaby/14092008667.jpg
http://www.importracer.com.ar/ftp/gaby/14092008668.jpg



I´ve read they are 40mm, but at the top they are 45, and at the bottom 42....

I dont understand how you measure this stuff

[-xlr8planet-]

Thank you Brian for sending me this stuff!!!!!!!!!!!!!!!!!!!!!!!!!!!

[TehMonkay]

dang, whered you get that, are there more?

[josh18_2k]

eh, i dont understand how 120hp carbs are gonna flow well enough for you?

[My5ABaby]

eh, i dont understand how 120hp carbs are gonna flow well enough for you?
He's got an FB? :rofl:

[need RX7]

Hot

[TehMonkay]

those 4 TBs have around as much surface area as two 56s actually.

[Whizbang]

but being how air flows, two 40mm openings with flow worse than one 60mm opening

[FIBREMAZ 13 BEEF]

Interested to see how much power is possible with those T.B's
Just for reference EFI hardware 50mm T.B's flow around 650-700cfm max per throat. I've had good experiences with these T.B's on both bridgeport and PP motors