Prosport Gauges? [Archive] - Rotary Car Club

vex

08-14-2008, 08:13 PM

Who has them and how do they like them?

I'm reading the reviews on them and some of them seem to have problems with quality and accuracy.

I'm curious because I am thinking I'll be unloading a fair amount of cash pretty soon for a set, and i'd like to have peoples opinion on them before I buy them.

If worse comes to worse I may have to just save and buy a digital dash, though I really don't want to. :(

Lotte

08-15-2008, 02:20 AM

i have the boost, water temp, egt, oil pressure, and oil temp. i like em IMO. i heard that the needle does not stay on 0 but i guess i was the lucky ones. they also have good customer service so if your gauge is defected they will replace it. these are a step down from the defi.

classicauto

08-15-2008, 10:57 AM

Oil temp and pressure here.

I thought somethign was wrong with them when I got them because in the boxes the needles pointed to arbitrary numbers.......but once they powered up they were fine.

Work great, awesome peak/hold warning features and affordable.

FirstRotaryExp

08-15-2008, 05:24 PM

I like my own pair of Prosport gauges (see thread in this section for what I did with them.) The needles point at 0 when off and seem to be working just fine for me, and I have the oil temp and pressure gauges as well.

RotaryXperiment

10-04-2008, 06:58 PM

i have them also. im now having problems with the boost gauge looks like it may be the pressure sensor thats off but it has a one yr warranty so it should be covered.
i gotta send it to them.
+1 on customer support

Brent

10-05-2008, 12:39 AM

agree with all of the above. They back their product which is a big deal to me. I guess everyone has seen their new center speaker gauge pod as well. If not:
http://prosportgauges.com/MazdaRX7gaugepod.aspx

proz07

11-09-2008, 01:57 AM

ya i have a couple only using the boost and EGT right now fuel will come soon. as far as how the gauges are in my opinion you get what you pay for, but thier customer service is A++. my boost gauge is off by varing amounts dependent on ambient temp it seems anywhere from 0-1.5 psi. the EGT gauge works it takes a min to warm up the sensor and the response isnt instant but then im compairing it to aircraft EGT speed too so ???? these vehicle egt's may just be slower cause of the type of sensors maybe a different sensor would be faster. btu they work and do thier job without breaking the bank
z

rx7 FC TII

11-11-2008, 09:52 PM

anybody have the digital ones?

im gonna be building a custom gauge cluster and considering using the digital ones.

classicauto

11-12-2008, 12:55 PM

the EGT gauge works it takes a min to warm up the sensor and the response isnt instant but then im compairing it to aircraft EGT speed too so ???? these vehicle egt's may just be slower cause of the type of sensors maybe a different sensor would be faster. btu they work and do thier job without breaking the bank
z

Are the K-type probes supplied with the Prosport EGT open, or closed element? Presumably closed, but you are correct that an open element would respond faster.

However I'm not sure exactly how long your gauge is taking to respond, even a closed type probe should closely follow the engine's condition, roughly 1-3seconds behind.....

anybody have the digital ones?

im gonna be building a custom gauge cluster and considering using the digital ones.

I haven't tried the prosport digital gauges, but FWIW, I've used other digital display gauges before and find it hard to adjust to viewing the gauge, reading the number, processing if its good or bad. A needle type gauge I can immedeatley identify as inside or outside of where it should be...but thats just my feelings - thuoght I'd share though :)

f1bluerx7

11-12-2008, 08:05 PM

Yep I'm dropping the dough on these bad boys along with their center gauge pod. F those retards trying to get 450 dollars for the flyrx7 center pods.

They look great and everyone I've spoken to has been happy with the product.

AwakenNoMore

11-13-2008, 02:36 AM

i too will be purchasing their center pod and Boost/Water Temp to replace the random ones currently in my car, the pillar pod its annoying i keep hitting it while steering.

Prosport Gauges

12-10-2008, 06:52 AM

Hey everyone we just became aware of this site and can help anyone out with questions/tech. advise. let us know if you need anything.

sbrian2

12-10-2008, 08:25 AM

Hey everyone we just became aware of this site and can help anyone out with questions/tech. advise. let us know if you need anything.

Is it true that you now have an affordable wideband gauge? I have an LC-1 and don't want to pay the $220 for the XD-16. I assume it accepts the 0-5v signal from one of the analog outputs.

classicauto

12-10-2008, 03:20 PM

Hey everyone we just became aware of this site and can help anyone out with questions/tech. advise. let us know if you need anything.

I'm also curious about something.

Someone mentioned to me your EGT gauge's have a 0-5v output for datalogging. I wasn't aware that they have this feature (unless he's wrong) but could you enlighten us? Your site doesn't seem to indicate taht they do.

Prosport Gauges

12-10-2008, 05:09 PM

AFR gauge- Yes our stand alone digital AFR gauge for $65 does read 0-5 volt, so if you already have the LC1 it will read from the output signal and work. :)

EGT gauge: No, it cannot datalog. The premium series (peak/warn) can recall the highest level attained and fully programmable warning buit into the gauge but no datalogging.

vex

01-11-2009, 12:57 AM

Is this the only wideband gauge you currently offer?
http://prosportgauges.com/digital-air-fuel-ratio-and-volt-gauge.aspx

Are there any plans to have a WO2 gauge available in the other styles/series?

Prosport Gauges

01-14-2009, 12:02 PM

Yes, we will have a Wideband with a pointer in our Premium Series (peak/warning)to be released in about 60 days.

vex

01-17-2009, 11:29 AM

Yes, we will have a Wideband with a pointer in our Premium Series (peak/warning)to be released in about 60 days.

Please keep us posted on this.

(also, consider getting in touch with phil--herblenny or zgn if you'd like vendor status for free)

Prosport Gauges

01-19-2009, 11:14 AM

OK, left a message for herblenny-waiting for a reply... thanks

Prosport Gauges

01-22-2009, 11:56 AM

Just an FYI -we are running low on the triple center gauge pods-in case anyone was needing one soon.

AwakenNoMore

03-06-2009, 05:15 AM

http://www.striracing-usa.com/hom.htm
better option . . .

Oliv

03-07-2009, 04:03 AM

I have the STRi X-Line water/oil temp, boost, fuel/oil pressure. Smoke lens amber lighting.
They work well.
But I wouldn't say they are better quality. For instance no connector between the gauge and the sensors: You have to twist and protect the wires. Also no ground: you have to ground them yourself with additional piece of wire. So not so clean in the engine bay.
But at the time I purchased 2 years ago they were the best for the price, no discussion.
That's for the cheap X-Line.

The DSD line is much more high range (equivalent to defi I've been told), but double price than prosport (at least here in Europe), but also twice less than defi!

Herblenny

03-07-2009, 07:23 AM

http://www.striracing-usa.com/hom.htm
better option . . .

I don't know about better.. By looks of it, it could be the re-badged version of Prosport...

I recently got a premium version Prosport gauge and I'm very happy with it. Fitment was really nice on the steering column pod because of its low mounting depth... and I like the dual illumination.. At night it matches the interior lights and during the day it lights up white.

Watch the video that I took.

http://www.youtube.com/watch?v=xMADFkWaZro

charlies7

03-07-2009, 03:31 PM

Wow, that is a really nice feature..I plan on running all prosport gauges once the car is back together this month. Need to fill my quad fly pod :).

Thanks for the video Phil...

GreatShamanGT

03-26-2009, 01:18 PM

Any updates? I'm not worried about buying Prosport gauges because I know they have very good customer support, but how have the gauges been holding up?

vex

03-26-2009, 02:37 PM

I haven't installed my boost gauge yet, and I just ordered two EGT's with the Peak/Warn

classicauto

03-26-2009, 02:39 PM

Any updates? I'm not worried about buying Prosport gauges because I know they have very good customer support, but how have the gauges been holding up?

The two I've been running since last year are great. I installed another 4 (2 EGT's, fuel pressure and boost) just recently and they're fine so far.

Prosport Gauges

03-26-2009, 04:29 PM

Any updates? I'm not worried about buying Prosport gauges because I know they have very good customer support, but how have the gauges been holding up?

Right now we have a 10% off sale going on for all RC club members !!

GreatShamanGT

03-30-2009, 10:49 AM

How long is it going on for? =]

Prosport Gauges

03-30-2009, 10:54 AM

till the end of April...

GreatShamanGT

03-30-2009, 11:00 AM

Whoa, that was a really quick response, lol. I'll place an order before then =]

FD3sAutobot

04-01-2009, 11:29 AM

What's the coupon code for the 10% discount? I'm trying to order some gauges now and I'm in Iraq.....so I really don't want to call. :D

vex

04-01-2009, 11:46 AM

What's the coupon code for the 10% discount? I'm trying to order some gauges now and I'm in Iraq.....so I really don't want to call. :D

it's in the vendor forum, but it's rx7

FD3sAutobot

04-02-2009, 08:43 AM

Thanks! Just placed my order!

Prosport Gauges

04-02-2009, 01:37 PM

thank you !!

Prosport Gauges

02-05-2010, 10:56 AM

hey just a heads up, we are offering all members 10% off your entire order using coupon code: rx7

We now have speedometers in stock, come check out our new revised website
http://www.prosportgauges.com

Let us know if you have any questions, you can always contact us here via PM, by phone 727-572-9011, email: sales@prosportgauges.com, twitter @prosportgauges, facebook, and of course smoke signals..

Heeley

04-26-2010, 03:14 PM

I just installed my prosport boost gauge, but i had some issues with the clips from the sender to the gauge. It was loose in the back of the gauge and won't lock in tight. I got it working, but it was a less-than-elegant solution. I just didn't want to ship it back and hten have to wait for a new one.

Prosport Gauges

04-27-2010, 06:28 AM

OK, so this is a Premium series boost gauge? because the opening is small on the back of the gauge it may need a small screwdriver to push the clip all the way on till it locks in place. Can you send us a picture directly to our email sales@prosportgauges.com

Herblenny

04-27-2010, 07:06 AM

I just replaced all my gauges with Premium Prosport gauges. I have to say, install was VERY simple if you are doing multiple Prosport Premium. I'll post pics later when I get my car back from the custom shop.

Oh, and the customer service is TOP NOTCH with Prosport gauges!

Prosport Gauges

04-27-2010, 09:36 AM

Thank you very much :)

Heeley

04-29-2010, 10:01 PM

Sharingan 19

08-19-2010, 10:51 AM

+1 for Prosport. I broke the little clip that plugs into the gauge installing mine a couple years ago, went down to the office and they gave me a new one.

Only issue i've had is that the boost gauge seems to read 1-1.5 psi low,and rarely sits at 0, but I mounted the sender in the engine bay in the pass side cornor so perhaps I need to relocate it or get another sender....or both.

Prosport Gauges

08-19-2010, 11:04 AM

Yeah, it could be your sender got wet, or dirt/fluid got into the sender. If it has been several years you may want to consider a new sender.

Pete_89T2

08-21-2010, 06:21 AM

Only issue i've had is that the boost gauge seems to read 1-1.5 psi low,and rarely sits at 0, but I mounted the sender in the engine bay in the pass side cornor so perhaps I need to relocate it or get another sender....or both.

Do you live at a high elevation above sea level (i.e., Denver/mountains)? If so, that may explain the 1~1.5 psi lower readings. Your gauge is reading absolute pressure, so as you go up in elevation air is less dense and ambient pressure goes down. If your gauges were calibrated at sea level (i.e., reads 0 when engine isn't running & gauge is powered up), you can expect them to read less than 0 (a little vacuum) when you at a higher elevation, and all boost #'s would be lower as well.

Sharingan 19

08-24-2010, 09:43 AM

I live in FL, no elevation factors... But I'll prolly stop by the shop when I go home to pick up some parts. I'd like to get some of the 45mm gauges for a custome panel...the 52's will be for sale.

D4rw1n

09-12-2010, 09:39 PM

do you have any plans to offer a fuel level gauge? I want to redo the dash in my FD with all prosport gauges but cant find a fuel level gauge that will match the other pro sport gauges.

Sharingan 19

09-12-2010, 11:51 PM

Indeed! I either need a fuel level gauge or I'll have to sell my brand new water temp and oil pressure gauges and use the 45mm versions in my custom cluster (so I can keep the stock fuel level gauge)

Prosport Gauges

09-13-2010, 08:46 AM

We have been tossing around the idea of a fuel level gauge, but the demand is so low.. We are having a meeting in Germany this week about new products and I'll let you know how it goes when I get back.

D4rw1n

09-13-2010, 08:28 PM

another question, does your 95mm tachometer have a smoked lens like the 95mm speedometer?

Prosport Gauges

09-14-2010, 08:09 AM

They sure do :)

They speedometers are 80mm btw.

Ryan

9krpmrx8

09-14-2010, 09:56 AM

Prosport Gauges,

I have a Oil pressure gauge (premium) in my RX-8 that is a couple years old and it went out, I am pretty sure it is the gauge itself and not the harness or sending unit. I really do not want to pull all of the wiring out but then again it could be the wiring as well. Is there anyway I can just send the gauge itself to be tested?

Prosport Gauges

09-14-2010, 10:03 AM

Hi,

Can you please call us for further help on this problem

Ryan
727-572-9011

D4rw1n

09-14-2010, 01:45 PM

http://prosportgauges.com/95mm-Speedometer.aspx

This is the only speedo I saw. Do you have a link for the 80mm one? Do you still carry the 95mm?

Also do you have any speedometers that register over 140mph?

Prosport Gauges

09-14-2010, 02:00 PM

Sorry you are correct. the speedometer is 95mm

Sorry, 140mph is max. you know your not gonna be doing 150, :P

Ryan

D4rw1n

09-14-2010, 03:07 PM

You're probably right.

Do you still carry this tach and is it smoked?

http://prosportgauges.com/3-3-4-tachometer-with-built-in-shift-light.aspx

From the pictures it looks clear, that's why I'm asking.

Prosport Gauges

09-14-2010, 03:12 PM

yep its smoked :)

D4rw1n

09-14-2010, 03:16 PM

thanks, sorry to keep bugging you

Prosport Gauges

09-15-2010, 08:31 AM

no problem man, thats what im here for

rx7 FC TII

10-21-2010, 01:34 PM

id be interested in a fuel level gauge as well. just if you want to get the idea out there.

Prosport Gauges

10-21-2010, 02:45 PM

ok, good to know

D4rw1n

04-15-2011, 01:59 PM

Any word on the Fuel Level Gauges?

Prosport Gauges

04-18-2011, 10:37 AM

no, no production date set yet as those are in such low demand for us to go into full production.

RXtacy

04-22-2011, 12:53 PM

I have boost, oil pressure, and oil temp premium gauges. So far I am happy with them. The daisy chain connections really make wiring them easy. They are a little hard to see during the day. I might have to wire them up to display white during the day like Phil did.

Flash

05-03-2011, 10:03 PM

I have a number of prosport premium gauges which I'm happy with however their product line is incomplete.

For those wanting an aftermarket Speedo, check out Speedhut gauges. Programmable or GPS speedos.
http://www.speedhut.com/gauge_products.asp?auto=revolution

They also have a programmable fuel level gauge.

Basically, they've got the full suite of gauges if you're looking to replace. Sure, they probably don't sell as much of either compared to a boost gauge, but in the business world we call these complimentary products. Obviously it can make the difference between a customer going with said brand or not.

JustJeff

05-04-2011, 12:11 AM

Glad this thread was bumped, seeing it reminded me i need both replacement water and oil temp senders (one got lost, the other I've messed with too much and has exposed wires) and an oil filter sandwich.

fc3sfreak415

06-21-2011, 03:02 PM

if you made the fuel guage i would def buy asap!

Prosport Gauges

06-21-2011, 03:40 PM

I have a number of prosport premium gauges which I'm happy with however their product line is incomplete.

For those wanting an aftermarket Speedo, check out Speedhut gauges. Programmable or GPS speedos.Basically, they've got the full suite of gauges if you're looking to replace. Sure, they probably don't sell as much of either compared to a boost gauge, but in the business world we call these complimentary products. Obviously it can make the difference between a customer going with said brand or not.

Just an FYI we do have speedo's http://prosportgauges.com/95mm-Speedometer.aspx

D4rw1n

10-11-2011, 03:21 PM

Yeah if they had the fuel level I would be redoing my whole dash. But the lack of it has forced me to start looking at glowshift (ewwww) because they do offer a fuel level gauge. I read some where that prosport gauges and glowshift gauges are made by the same company, seems weird one would offer a fuel level and the other would not.

Raksj04

10-12-2011, 01:27 PM

I Would buy a Fuel Level gauge if it came with a sender. My motorcycle doesn't have one. I have your Digtail water temp gauge I haven't installed it yet. I haven't made up my mind if I want to keep my stock gauge working as well.