Gauge Pod Updates and the Best Way for Ordering Gauge Pods [Archive]

Flyrx7

07-02-2008, 02:15 AM

How to order pods:

- Send me an email @ flyrx7@aol.com with the gauge pod part # in the subject heading. See this thread for pictures and part nomenclature:
http://rotarycarclub.com/rotary_forum/showthread.php?t=5626

Within the email include:
- Your name
- Your forum ID
- An email address to contact you by (if different than the one you're sending from).
- Also let me know if you will require spacer rings.

That's it.

The reason that it has to be email is that it lessens the confusion for me and that is also how the Waiting List is formatted as well. All payment and shipping information is handled via email as well. If the pods are not in stock I will add you to a production waiting list

Payment can be Paypal, personal checks and money orders. I'm in the process of setting up to receive credit cards too, but my bank is dragging their feet. All payments and shipping info will be handled once the pod(s) are ready to ship.
Personal checks and money orders will have to clear the bank prior to shipping.
Paypal must be to confirmed addresses.

If you have any questions, just ask here on the forum or my email address.

Regards,
Frank

Flyrx7

07-02-2008, 02:15 AM

I sent out emails on 6/29/08 to the people at the top of the waiting list to let them know that the last batch was done and ready to ship. Check your emails and spam filters just in case you were one of them. I have received a couple bounces so far.....so bad luck for some means good luck for the next guy.

Also of note, I'm underway with the next batch of pods as we speak.
This batch will be about 80% +/- of the waiting list, 52mm, 60mm, Left hand and Right hand pods.
I'm still waiting for some supplies to come in over the next week, but I'm starting in with the materials I have on hand.

I'll post updates as they occur.

Regards,
Frank

Flyrx7

07-15-2008, 01:03 AM

7/14/08 Waiting List Update:

As it is now, 100% of the 52mm pods and close to 100% of the 60's are in production. I'm a few short on the 60's, but history has proven that not everyone on 'the list' follows through, so if you're on 'the list' at all, you're likely to be in the latest run. The wait shouldn't be long.

Also, I've sent out the 3rd round of emails on the latest batch of 52mm pods on 7/13/08.
I'm just waiting for the replies and confirmations. The next round of emails that will follow should complete the latest production run of 52mm pods. So if you've been on the list and haven't received an email yet, there may still be a chance (unless you want a quad, then, sadly, you must wait just a bit more)

As it stands at the moment, the LH52TP pods are nearly caught up to present as far as the Waiting List is concerned. Which means that that particular model # has nearly reached an "in stock" status. As many of you surely know, that hasn't occured for far too long.

On a final note, I do have a few extra RH52TP's in stock from the latest batch, so if anyone from across the pond is lurking, I've got you covered.

That pretty much covers the latest updates, except for maybe the LH52TP that will be up for the RCC Membership Raffle within the next few days or so (just got to iron out details, so stay tuned).

Regards,
Frank

Flyrx7

10-29-2008, 07:16 PM

Phew.......
Just winding down on my contract stuff now....finally!
I'll be starting up on pods again around the start of next week and they should start rolling out about a week or two after that.
While this current batch is the biggest I've had to do to date, there may still be some late comers that may not get a pod from this batch. It's close and too soon to call, but just wanted to mention that.

I'll have more concrete numbers and a clearer picture as soon as this batch gets done. Then I'll start on the next batch immediately thereafter for those that miss out.

Thanks for hangin' guys and gals!

Regards,
Frank

PS....still have alot of emails to respond to.....I haven't had the time to respond to those yet.

T2 Tsunami

11-02-2008, 10:30 AM

Hey Frank, will you be sending e-mails out to those who are in this batch?, I'd like to get an idea of when to get ready for this project. Thanks Tony.

Flyrx7

11-08-2008, 10:41 AM

Hey Frank, will you be sending e-mails out to those who are in this batch?, I'd like to get an idea of when to get ready for this project. Thanks Tony.

Tony, you can plan on your pod shipping begore the end of this month.

I will send out emails to everyone, but only after the batch is done.
Coming Monday we will be full time on pods for awhile, so there is some good news!

Regards,
Frank

Brent

11-08-2008, 11:54 AM

I just received your email. Thanks alot Frank and I look forward to getting a pod!!

Brent

neit_jnf

11-08-2008, 07:09 PM

the hometown webpage doesn't work anymore! any other place to see the pods info?

Flyrx7

11-12-2008, 03:24 AM

the hometown webpage doesn't work anymore! any other place to see the pods info?

I'm in the process of building another webpage, flyrx7.com, but figured it could wait until I'm done with this batch at least.

If anyone is looking for a specific part# and need to see a pic let me know. I'll try to at least get a new thread going with part pics if the need is there.

Regards,
Frank

RX7ist

11-18-2008, 03:01 AM

Frank,

I've been on the list and no email from you so far. Can you just keep me posted? I would really like to get my hands on these.

Thanks,

Flyrx7

11-18-2008, 10:45 AM

Frank,

I've been on the list and no email from you so far. Can you just keep me posted? I would really like to get my hands on these.

Thanks,

RX7ist,

Send me an email with your info as per the first post in this thread, I don't have your screen name noted on my list, but maybe as your name or email.

Thanks!
Frank

islanders_rx7

11-23-2008, 06:12 PM

Frank- Will I be able to get one by the end of the month too?

money

11-26-2008, 01:57 AM

any update buddy??? i sent u an email too

neit_jnf

11-29-2008, 05:20 PM

i want a 52mm Lhd 4-pod

T2 Tsunami

11-30-2008, 08:36 PM

I hope everything is still as planned. End of the month is here.

To_Slow

12-01-2008, 09:33 AM

I hope so 2...

Flyrx7

12-01-2008, 09:50 PM

Sorry guys, running a little behind (what else is new, huh?)

I'm just now finishing them up and they will be ready to ship by the 10th. Promise.

I will be sending out emails within the next couple days.

Regards,
Frank

LeeC

12-01-2008, 10:01 PM

Any updates on the LHD 60mm quad pod

Looking forwards to being able to pay for it and get this!

I have a ton of defi's and no where to put them ;)

Flyrx7

12-01-2008, 10:17 PM

Any updates on the LHD 60mm quad pod

Looking forwards to being able to pay for it and get this!

I have a ton of defi's and no where to put them ;)

LeeC,

At this moment you are on the bubble. If some people back out (entirely probable) then I might have your pod. I'll have to wait on the replies from the emails that I'll be sending out. Cross your fingers.

Frank

Flyrx7

12-10-2008, 01:36 PM

Since my old website is gone and until I get my new one up and running, click here for pics and prices. I'll add more as necessary.

http://rotarycarclub.com/rotary_forum/showthread.php?t=5626

N3philum

12-10-2008, 06:29 PM

Frank,

Just curious if im in the window for this batch.. I havnt received any emails. Thanks.

Flyrx7

12-10-2008, 07:54 PM

Frank,

Just curious if im in the window for this batch.. I havnt received any emails. Thanks.

You are!
I don't have an email addy for you, but I left you a PM at the evil forum as that is what I had for you (didn't have time to check for you here).

Send me an email at Flyrx7@aol.com, and let me know it's you, and I'll send you all the pertinent info for shipping and payment, etc.

Regards,
Frank

N3philum

12-10-2008, 09:01 PM

ill send you the email when i get home tonight. i didnt get a PM from you at all.. Im stoked about the pod! :) xmas present for me!

LeeC

12-10-2008, 11:59 PM

LeeC,

At this moment you are on the bubble. If some people back out (entirely probable) then I might have your pod. I'll have to wait on the replies from the emails that I'll be sending out. Cross your fingers.

Frank

They are crossed, toes too.

Will you be posting up after this batch has shipped so the people who are in my situation will be aware that they didn't quite make it in?

Thanks,
Lee

Flyrx7

12-11-2008, 10:44 AM

Will you be posting up after this batch has shipped so the people who are in my situation will be aware that they didn't quite make it in?

Lee

Absolutely.

It usually takes a few weeks to go through the shipping process, as I give everyone (1) week to respond to the notification email.

Once this batch ships out I'll know what part numbers I'll need for the next batch. I'll post here when the next batch is to start then.

Regards,
Frank

LeeC

12-15-2008, 02:32 AM

Sounds good :)

PortedRotorTuner

12-15-2008, 09:52 AM

Sent you an email Flyrx7

Flyrx7

12-18-2008, 09:59 PM

I do have some 52mm pods in stock and ready for immediate sale and shipping.
http://rotarycarclub.com/rotary_forum/showthread.php?t=5778

Still going down the list for the remaining 60mm pods too, so there is still a chance for some of you that have been waiting.

Regards,
Frank

N3philum

12-23-2008, 12:09 AM

neit_jnf

12-23-2008, 03:39 PM

I got mine! It's a thing of beauty! I'll post pics later... Thanks Frank!

Flyrx7

12-24-2008, 05:25 PM

how many RHD pods do you have available? i know a bunch of RX7 guys here in japan that would love to get their hands on some pods. 60mm is preferred, but i might be able to work something with the 52. let me know and i can put the word out.

I'll have to verify my stock after the waiting list gets taken care of, but I'll most likely have more of the 52mm than 60mm, but that is just a guess.

The best bet would be for your buddies to drop me a line and just get added to the waiting list. I can guarantee that it won't take nearly as long to get the pods out in the next batch as it has taken for the last couple.

At any rate, I'll post what pods are available for immediate sale in this vendor section, similar to this thread.....

http://www.rotarycarclub.com/rotary_forum/showthread.php?t=5778

Regards,
Frank

Flyrx7

02-28-2009, 07:44 PM

Brief update!

Just finished the last batch today. I'll be sending out emails either later tonight or tomorrow.

Regards,
Frank

Flyrx7

05-14-2009, 09:55 AM

Many part #'s still in stock and ready to ship.
Just an FYI for those that may be lurking.

marcusd666

07-13-2010, 06:31 AM

I there, are there any of these still available for a right hand drive car ????

Thanks

Flyrx7

07-15-2010, 01:40 AM

Marcus,

Available? Yes. In stock? The only RH I have in stock at the moment is a RH160252 pod. I'm close to starting another production run, but I've actually been away on vaca and this is the first chance I've had to connect in a while (sorry for the late response btw).

I'm away from my list, but your names familiar, are you on it?

Frank

marcusd666

07-15-2010, 02:55 AM

Hi Frank, Thanks for the reply don't think I'm on the list I can wait till they come in stock I think the part number is RH52TP ? for a triple right hand drive is the one I'm looking for.

If you could add me to your list please I will be very interested in one of these. Just let me know when they are in stock again.

Regards

Flyrx7

07-23-2010, 11:39 AM

Marcus,

Send me an email at flyrx7@aol.com with your first name and city/country info and I'll get you on the list. Be sure to include the part #. I'll be using that email as your contact source. I should be able to start back up on pods in a little over a week or so.

Frank

Flyrx7

03-08-2011, 03:16 PM

Brief update:

Production is moving forward, albeit the typical snail pace.
I'm having issues with the supply of the attachment clips, being that the factory is out of stock and will only run an order of 50+ thousand at a time. No way in a million years would I need 50 thousand clips, so I'm looking for retailers with stock (not an easy task) and also alternative fasteners.

The production waiting list is still in order, so if you've never got confirmation yet, then send me an email at flyrx7@aol.com with the part number you're looking for. Current emails will be replied to today, so check them for responses first. Thanks!

Regards,
Frank

PS. I'm hoping to be able to get back to full time production on the latest batch in about 3 weeks when my contract work tapers off.

Flyrx7

04-02-2011, 01:40 PM

Update:

Clips have been sourced and are on the way...$.09 each sure beats the $5 each that Mazda wants.
Production is underway and is top priority, so the current production run should be ready to ship in 3-5 weeks if everything goes smoothly. If you're not on the list, drop me a line to be sure of availability.

Regards,
Frank

danben

04-02-2011, 07:59 PM

awesome, thanks Frank :biggthumpup:

Flyrx7

05-02-2011, 02:12 PM

The latest batch of pods are done!

I sent out all the emails and PM's this morning (my time) for those of you on the production list, so if you're on the list, check your emails.

Depending on the actuallity of everyone on the list wanting a pod or not, I may have some extras, depending on the part #. If anyone else is interested just let me know and I'll get you down as an alternative in case anyone backs out. First come, first served for the Alternative List.

Let me know if anyone has any questions.

Regards,
Frank

careveryday

05-16-2011, 04:21 PM

I am very interested in this group buy and just sent you an email a couple hrs ago.

Flyrx7

05-16-2011, 05:08 PM

I am very interested in this group buy and just sent you an email a couple hrs ago.

Emails have been replied to.
Sorry, but no group buy going on at this time.
Let me know if you have any other questions.

Regards,
Frank

danben

05-17-2011, 07:35 AM

Flyrx7

05-18-2011, 01:28 PM

Hey Frank, just wanted to say a huge thanks from Australia, I just received my gauge pod today and installed it tonight immediately. I am incredibly impressed and very happy. You really put a lot of thought and detail into this and I really appreciate it. If you sell other similar items for the FD I'd probably be interested in those too, haha:001_302:

Thanks a ton, danben! Always good to hear from a happy customer.

marcusd666

05-20-2011, 07:17 AM

Hi Frank, just wanted to say thanks for the gauge pod it arrived today safe and sound it looks great you have done a great job in producing these pods for the RX7 FD3 just have to sort nice gauges now.

Thanks again its been great doing business with you.

Gringo Grande

06-15-2011, 11:41 AM

Out of production again? Sent an email a few days again with no response. =(

Flyrx7

06-15-2011, 02:02 PM

Out of production again? Sent an email a few days again with no response. =(

Nope, just extremely busy the past few days. Getting to the correspondence now. If you don't receive a reply directly within the next hour or so, just let me know.

Regards,
Frank

marcusd666

07-26-2012, 05:54 PM

Well I have finally got round to installing my new gauge pod that I got off Frank I know I have had this for sometime but I have been really busy here are some pictures.

https://picasaweb.google.com/lh/photo/mxAv5TA6lHbUJs3XOH3_INMTjNZETYmyPJy0liipFm0?feat=d irectlink

https://picasaweb.google.com/lh/photo/kHpODWABexH7pd3RKX_zqNMTjNZETYmyPJy0liipFm0?feat=d irectlink

https://picasaweb.google.com/lh/photo/vZfMUGRzLgRNpJzDO0mAktMTjNZETYmyPJy0liipFm0?feat=d irectlink

Thanks again Frank well worth the wait....

Flyrx7

07-26-2012, 06:53 PM