Post your hp with bnr turbo

[rotoriousrx7]

http://rotarycarclub.com/showthread....7866#post27866 :001_005:

310 rwhp @12 psi
supposed to be some kind of correction (10-13%)but we just say 310hp no torque numbers though:o10:

[ZGN]

363rwhp @16psi Stage 3 non seq, street port, 850pri 1600sec dp/mp PFS intercooler/intake/exhaust, PFC, nippondenso fuel pump, MDS6a on leading, 4 bags of ice on IC. It was a hot day 95+ steve tuned

[SPICcnmFD]

351rwhp @16psi BNR stg. 3's

stock reman
sequential
4x850cc
DP, MP, Racing Beat CB
Intakes
Custom SMIC and ducting
PFC
tuned by me, now it's tuned better by me so it's probably a little higher:biggrinjester:

[Phoenix7]

Fellas, don't forget to add what year car and Mods so we can have a good comparison. Mods/admins feel free to delete this post afterwards.

[88turboii]

308whp at 12 psi, stockport S4 TII with blown coolant seals, very conservative tune

[RX7 RAGE]

Anybody dyno on 91 octane yet?

[gxlbiscuit]

stage 3 303hp (dynojet) at 16.5 psi with safc2 rtek1.8 750 primaries and 850 secondaries running at 51lbs fuel pressure. rotary aviation seals 2.5 inch exhaust and stock ports 91 octane:-) 88t2

[Bryan@BNR]

stage 3 303hp (dynojet) at 16.5 psi with safc2 rtek1.8 750 primaries and 850 secondaries running at 51lbs fuel pressure. rotary aviation seals 2.5 inch exhaust and stock ports 91 octane:-) 88t2

Did you feel a difference with the 3" exhaust conversion after you dynoed 303? 300 RWHP is the limit for 2.5" exhaust.

[rotoriousrx7]

well i have got my ebc figured out now and can get a steady 15 psi till near redline and i talked to the guys that dyno'd my car and they said i should have around 340 ish rwhp @ the 12 psi so idk on how i have near the power of your stage 3's?

but im going to ago back sometime soon and rerun it with all the crap hooked up and get a print out if i can

[88turboii]

what are your EBC settings? i have the profec II and have the same problem, boost drops to 11-12psi at redline

[85rx-7gsl-se]

well i have got my ebc figured out now and can get a steady 15 psi till near redline and i talked to the guys that dyno'd my car and they said i should have around 340 ish rwhp @ the 12 psi so idk on how i have near the power of your stage 3's?

but im going to ago back sometime soon and rerun it with all the crap hooked up and get a print out if i can

Giant Lander's Streetport :dunno:

[exmanos]

Done my dyno day yesterday :)
Stage 3 on my 92 FD with PFC,3" exhaust,850 prim. 1600 sec,stock ports,Greddy Smic
300 rwhp@13psi
325 rwhp@16psi
At 16psi i have full power at 6100rpm and keeps that way till 8000 which is very very good...the car has more potential but i'm very happy with it right now and no reason to push it further

[SPICcnmFD]

Here are my new numbers, changed the secondaries to 1300s and put a Street port in, besides that everything else is the same, stil seq. Tuned alittle rich at approx. 10.8 afrs.

382 rwhp @ 16psi

Makes 300hp from 5100+