20B Eshaft Pullers -Pics-

[Herblenny]

I thought I post it here..

Here are what 20B Eshaft Pullers look like..

Home Made Puller

http://www.rotarycarclub.com/attachment.php?attachmentid=1416&stc=1&d=1210081295

http://www.rotarycarclub.com/attachment.php?attachmentid=1417&stc=1&d=1210081303

http://www.rotarycarclub.com/attachment.php?attachmentid=1418&stc=1&d=1210081310

http://www.rotarycarclub.com/attachment.php?attachmentid=1419&stc=1&d=1210081320

[Herblenny]

Mazda Special Tool!

http://www.rotarycarclub.com/attachment.php?attachmentid=1421&stc=1&d=1210081474

Inside
http://www.rotarycarclub.com/attachment.php?attachmentid=1420&stc=1&d=1210081438

[BLK FC3S]

NICE! I might have to borrow that from you one day.

[tom93r1]

very creative! And alot less $$ than the Mazda tool.

[To_Slow]

Mazda Special Tool!

http://www.rotarycarclub.com/attachment.php?attachmentid=1421&stc=1&d=1210081474

Inside
http://www.rotarycarclub.com/attachment.php?attachmentid=1420&stc=1&d=1210081438

That looks like Carlos Lopez e-shaft puller. Nice pice. Well worth the money.

[AHarada]

Nice work.

What exactly is this used for?

[HellBent]

PULLING OUT THE ECCENTRIC would be my guess, since its a ECCENTRIC SHAFT PULLER

[jtbshaw]

< butthead> uh huh huh, he said "shaft puller", huh huh huh < /butthead>

that's funny! :lol:

[Prometheus]

Jesus, I wish I had one of those a last weekend.

I had to use a pry bar (that I wrapped with a rag many times, to be sure not to gnar the lobe) and a piece of Teflon between the side plate (to crush/ cushion) tha back side of the pry bar.

with some penetrating oil and no tapping with a hammer, the lobe simply slid off with adequate pressure applied to the pry bar.

I was surprised on how easy the lobe came off.

I did this on 3 20B blocks and there was no damage.