wtb repu lsd kit

[Xp882]

looking for a repu lsd kit if anyone has one forsale thanks

[JDriftM]

I've not heard of a REPU LSD kit, per say, but I do have a REPU differential and housing if that's what you're looking for.

Shoot me an email at sleek.mightyre@yahoo.com if you're interested.

-Tim

[chuyler1]

Years ago someone was making an adapter plate for RX7 LSD to drop in. All you had to do was trim a little bit of the housing. If someone offers the kit again you can add me to the group buy. Otherwise, search the repu forum for specifics and have a machine shop make one for you.

[almoststockfc]

Years ago someone was making an adapter plate for RX7 LSD to drop in. All you had to do was trim a little bit of the housing. If someone offers the kit again you can add me to the group buy. Otherwise, search the repu forum for specifics and have a machine shop make one for you.

???? Adapter plate ??? This doesn't make any sense.

???? Machine shop make one for you ??? Make what? A LSD? A whole housing?

[FC Zach]

? ? ? ? Jeff, why so many questions? ? ? ? :Wconfused: :p

[almoststockfc]

I normally wouldn't respond to a post topic like this... But i felt it was necessary.

Bad data is worse than no data at all.

[FC Zach]

Data?

[FC Zach]

I normally wouldn't respond to a post topic like this... But i felt it was necessary.

Bad data is worse than no data at all.

You felt it was necessary to respond to something you obviously have input towards but provide no helpful information. . What is it that you are thinking for those of us who don't read minds?

[FC Zach]

A quick Google search yielded these results:

http://mazdarepu.com/board/viewthread.php3?FID=1&TID=1908

[FC Zach]

looking for a repu lsd kit if anyone has one forsale thanks

I know a guy who specializes in this sort-of stuff http://rustybottomgarage.com/, If you can get me the measurements and/or CAD drawings for the two spacers, I know a guy that would probably be willing to make these. PM me with any information found and I'll ask.

[chuyler1]

A quick Google search yielded these results:

http://mazdarepu.com/board/viewthread.php3?FID=1&TID=1908
Precisely what I was talking about. An adapter plate. You either do this, or you swap out the whole axle for something else.

[Xp882]

lrd speed is working on kit so hopefully it goes good the spacer is .423"

[Xp882]

Precisely what I was talking about. An adapter plate. You either do this, or you swap out the whole axle for something else.

chuyler are you sure your truck doesnt have one? garys other truck did so maybe he did both

[chuyler1]

I've never got it to spin more than the inside wheel...but I never tried rotating the wheels with it on a lift to check. Now you got me wondering. The motor is apart right now though, working on adding fuel injection.