fc7even
01-05-2015, 03:33 PM
Hey guys, new to this forum and fairly new to the rotary. I own an 89 fc N/A 6 port. Bought the car a few years ago with my brother in law for cheap cuz the guy thought it had and electrical problem. Just a wire shorting and blew the egi fuse. Got that figured out and runs like a dream.
The work iv done so far includes new atkins 5/6th port sleeves, all manifols ceramic coated, new gaskets everywhere i could without takin the motor apart. Remove omp and run RTEK 2.1, fixed a bunch of rust. I cut out all the rust sports and welded new pieces in there. Got the rims powder coated black, new fuel filter, RB front and rear sway bars with adjustable links.replaced the d.s. door.
Work to be done or in progress
currently building a custom stainless steel exhaust manifold and a single 3" exhust. Built a custom lobster back intake with stock maf sensor. Also ordered a fuel rail blank so i can make my own custom fuel rails and run stainless fuel lines. Also gonna build my own fan shroud and under motor plate.
The work iv done so far includes new atkins 5/6th port sleeves, all manifols ceramic coated, new gaskets everywhere i could without takin the motor apart. Remove omp and run RTEK 2.1, fixed a bunch of rust. I cut out all the rust sports and welded new pieces in there. Got the rims powder coated black, new fuel filter, RB front and rear sway bars with adjustable links.replaced the d.s. door.
Work to be done or in progress
currently building a custom stainless steel exhaust manifold and a single 3" exhust. Built a custom lobster back intake with stock maf sensor. Also ordered a fuel rail blank so i can make my own custom fuel rails and run stainless fuel lines. Also gonna build my own fan shroud and under motor plate.