infernosg
02-13-2014, 04:52 PM
Going with a different setup so I don't need these anymore. They were installed on my red FC for close to two years but the car never actually ran. Detailed information on the gauges can be found here: http://www.marshallinstruments.com/catalog/scx_black.cfm.
Otherwise, here's the general info:
Brand: Marshall Instruments
Line: SCX (black on black)
Type: Electric, 270-degree sweep
Gauges: Oil temperature, oil pressure, and water temperature
Illumination: Red or white
Pointer: Red
Other features: Peak recall, high/low warning, warning 12V output, remote calibration button
Included is the gauge, flying lead harness, sending unit, and instructions. I only have one set of instructions for the temperature gauges as the setup is identical.
Full disclosure: one of the leads to one of the remote calibration buttons has separated (see below) but that's easily fixable with some solder and heat shrink tubing. I can fix this before shipping if needed.
Asking price: $70 each or $180 for all three.
I also have a generic universal metal gauge pod I'll throw in for free with purchase of all three gauges. Otherwise it's $20.
Otherwise, here's the general info:
Brand: Marshall Instruments
Line: SCX (black on black)
Type: Electric, 270-degree sweep
Gauges: Oil temperature, oil pressure, and water temperature
Illumination: Red or white
Pointer: Red
Other features: Peak recall, high/low warning, warning 12V output, remote calibration button
Included is the gauge, flying lead harness, sending unit, and instructions. I only have one set of instructions for the temperature gauges as the setup is identical.
Full disclosure: one of the leads to one of the remote calibration buttons has separated (see below) but that's easily fixable with some solder and heat shrink tubing. I can fix this before shipping if needed.
Asking price: $70 each or $180 for all three.
I also have a generic universal metal gauge pod I'll throw in for free with purchase of all three gauges. Otherwise it's $20.