djmtsu
01-22-2012, 06:13 PM
It is time to sell my 1st gen. I picked up a 2006 RX-8, and the wife says only one rotary at a time now.
1984 Mazda RX-7 GS
-GSL disc rear end with LSD
-Racing Beat springs
-122,000 miles, gauge cluster has been replaced with one that shows 175K+
-Emissions removed (still have everything except air pump
-alot of new OEM Mazda plastics (steering column surrounds, door handle cups)
-Pioneer CD/MP3 player with Polk Components in the rear
-New brake booster and master cylinder
-Rare factory Mazda Almex wheels with nearly new Goodyear rubber (also 5th spare with original tire)
Comes with spares, extras-
-FC front mount oil cooler
-Nikki Carb rebuild kit
-Extra radiator
-spare right left fender
-Racing Beat muffler (not installed)
-Spare set of new rear rotors
The bad-
-Needs paint. Front hood, header panel and headlights have been hastily primed by previous owner. The spare fender is because the fender was tweaked and someone did a poor job of repairing it. The spare was going to go on before paint.
-Interior still needs some things, rear carpet, storage bin lid. Rear plastics could use a repaint.
-Needs a new sunroof panel. I was trying to locate a glass one, but nobody ever came through for me.
-Has a crappy muffler on it
-No cats
Has a few other issues that I will take care of if the buyer wants me to. The steering column collapsible rivets need to be re-revited, the headlight switch needs a good cleaning since the brights only work if you hold the switch back. Cold solders in the flasher box need to be re-soldered (fast flashers).
Otherwise it is a good running and driving car. If the buyer pays full price, I will include-
-new tie rods
-new pitman arm
-new idler arm
-sway bushing links
-control arm bushings
-ignition cap/rotor/wires
-brake pads all around
-wheel bearings
I can get as many pics as necessary. These are the only two I have on my computer. If it doesn't sell, or I only get lowballs, I will just keep it under a cover in the back yard.
PLEASE NOTE THE BBS WHEELS HAVE BEEN SOLD!!!
$1500.00 Located in Murfreesboro, TN, clean clear title in hand.
https://lh3.googleusercontent.com/-yXgWctt3ILo/TxyK0WUNBzI/AAAAAAAADFU/tFI9jOn5ev8/w386-h290-k/IMG_20120122_161518.jpg
Please note, I do have a front valance, it is red. And the headlights are not broken!!
https://lh6.googleusercontent.com/-HU_MY4G5Atk/TZtLMvwITeI/AAAAAAAACik/9CP6PQVcQRA/s800/IMAG0120.jpg
1984 Mazda RX-7 GS
-GSL disc rear end with LSD
-Racing Beat springs
-122,000 miles, gauge cluster has been replaced with one that shows 175K+
-Emissions removed (still have everything except air pump
-alot of new OEM Mazda plastics (steering column surrounds, door handle cups)
-Pioneer CD/MP3 player with Polk Components in the rear
-New brake booster and master cylinder
-Rare factory Mazda Almex wheels with nearly new Goodyear rubber (also 5th spare with original tire)
Comes with spares, extras-
-FC front mount oil cooler
-Nikki Carb rebuild kit
-Extra radiator
-spare right left fender
-Racing Beat muffler (not installed)
-Spare set of new rear rotors
The bad-
-Needs paint. Front hood, header panel and headlights have been hastily primed by previous owner. The spare fender is because the fender was tweaked and someone did a poor job of repairing it. The spare was going to go on before paint.
-Interior still needs some things, rear carpet, storage bin lid. Rear plastics could use a repaint.
-Needs a new sunroof panel. I was trying to locate a glass one, but nobody ever came through for me.
-Has a crappy muffler on it
-No cats
Has a few other issues that I will take care of if the buyer wants me to. The steering column collapsible rivets need to be re-revited, the headlight switch needs a good cleaning since the brights only work if you hold the switch back. Cold solders in the flasher box need to be re-soldered (fast flashers).
Otherwise it is a good running and driving car. If the buyer pays full price, I will include-
-new tie rods
-new pitman arm
-new idler arm
-sway bushing links
-control arm bushings
-ignition cap/rotor/wires
-brake pads all around
-wheel bearings
I can get as many pics as necessary. These are the only two I have on my computer. If it doesn't sell, or I only get lowballs, I will just keep it under a cover in the back yard.
PLEASE NOTE THE BBS WHEELS HAVE BEEN SOLD!!!
$1500.00 Located in Murfreesboro, TN, clean clear title in hand.
https://lh3.googleusercontent.com/-yXgWctt3ILo/TxyK0WUNBzI/AAAAAAAADFU/tFI9jOn5ev8/w386-h290-k/IMG_20120122_161518.jpg
Please note, I do have a front valance, it is red. And the headlights are not broken!!
https://lh6.googleusercontent.com/-HU_MY4G5Atk/TZtLMvwITeI/AAAAAAAACik/9CP6PQVcQRA/s800/IMAG0120.jpg