Indiana: F/S 89 Vert shell + RB exhaust

[JustJeff]

It is with much sadness that I'm gonna offer up my southern vert shell, RB N/A exhaust and all the engine parts I have left.

Here is the car. The pic is about a 6 months old and it's been sitting in a pole barn since soon after this pic was taken.
http://a2.sphotos.ak.fbcdn.net/hphotos-ak-ash4/217689_1847140372619_1063965498_31930639_4965572_n .jpg

Here's what all I"m trying to unload. I'd prefer to sell to one person but I will separate. I will not be parting out the shell.

89 Vert shell with no motor
-No rust at all anywhere. It has normal dents and dings.
-Needs a new top
-Will not include the turbo hood as I need it for my turbo swap. I can provide either an N/A black vert hood or I can source a silver turbo hood if needed
-Car will have a black front bumper

S5 N/A engine broken down and minus the rotors
-Other than low on power the engine had no issues before teadown
-Irons are reusable, one housing has significant flaking, other one seemed reusable
Racing Beat exhaust
-It's a full exhaust. Downpipe, presilencer, y-pipe and both cans. It's low mileage on them. I drove the exhaust daily for a year or so. Then it was put on my father's vert, but that car was a seasonal and weekend car. Very few miles were put on it since I stopped using it.
http://a6.sphotos.ak.fbcdn.net/hphotos-ak-snc7/s720x720/302596_2262009624091_1063965498_32371284_344344712 _n.jpg

http://a7.sphotos.ak.fbcdn.net/hphotos-ak-snc7/s720x720/304560_2262006344009_1063965498_32371269_664390401 _n.jpg

http://a6.sphotos.ak.fbcdn.net/hphotos-ak-ash4/s720x720/310126_2262006624016_1063965498_32371271_910154373 _n.jpg

http://a2.sphotos.ak.fbcdn.net/hphotos-ak-ash4/s720x720/298566_2262007224031_1063965498_32371273_879068959 _n.jpg

Story is that it was originally purchased in Southern Cali. I bought it from the 3rd owner in Atlanta. It never saw any snow before I owned it. The only snow it has seen is a few mild southern Indiana winters.

The car did have a turbo swap done to it. I detonated that engine almost 2 years ago and the car has sat ever since. I have since pulled that engine, rebuilt it and it is sitting in my new vert.

I am open to some trades or partial trades depending on whats available. Things I need are:
Rims
VMIC and all the bits and pieces
paint work. It's a long shot, but I have a turbo hood, MS scoop, front lip, and front bumper that needs painted black. If someone can provide quality prep and paint I'd be interested in trading.
RX-8 or FD seats
Last thing I can think of is various electronics (EBC, Wideband)

[JL1RX7]

If you do decide to sell the exhaust separate let me know. I will take it off your hands.

[JustJeff]

If you do decide to sell the exhaust separate let me know. I will take it off your hands.

I'll sell the exhaust separate, but I don't want to split up the exhaust parts. It's an all or none type thing.

I'll do the exhaust for $450 +shipping. I'm firm on the pricing, it's a fair price. Let me know your addy or zip and I can get your costs.

[RotorDad]

Did I miss something, how much for the shell?

[JustJeff]

Did I miss something, how much for the shell?

You missed a little bit. My rebuild and drivetrain swap is just about complete. I've moved everything into the black vert my father previously owned. I bought the 90 black vert from him to put my drivetrain into. It's going to an exhaust and brake shop on Friday to have the exhaust tightened up and brakes bled properly. After that I for the most part should be driving the turbo vert this weekend <tentative>:biggthumpup:

I still need to have body panels painted black and I'll be using the N/A hood overtop the TMIC till I decide who is doing my prep and paint. I've got my MBC set for zero boost and initially I won't be taking the engine over 3000 RPM...using the N/A hood temporarily shouldn't be an issue.

What has changed is that my daily driver mini-van is on it's last leg. It's not worth putting more money into. I'm taking on new rolls (PROMOTION!!) at work and will need something larger than a two-seater for some of my work duties. I still need to have a meeting with my bosses and owner to work out the details....but I don't expect my raise to be enough to both save for a new car as well as fund a new project. There is a small chance I'll keep the shell and sell everything else, but unless I win the lottery without having bought a ticket I just don't see it happening.

I originally wanted to use the southern shell as a new and larger project...but life has dictated other plans.

All that being said...can I unload all my N/A engine parts on your or do you only want the shell?

[RotorDad]

My brother was looking for a decent vert shell, we have a few motors here to use so, but I'll ask him this weekend. So if you could let me know what you would like to get for what you have & just for the shell.

Thanks

[JL1RX7]

Zip is 20121. Were are you? I can always take a trip on the weekend depending on what shipping might be. I know greyhound can be cheap for big oversized stuff.

[JustJeff]

My brother was looking for a decent vert shell, we have a few motors here to use so, but I'll ask him this weekend. So if you could let me know what you would like to get for what you have & just for the shell.

Thanks

You caught me off guard by having someone interested this soon. I was expecting the thread to sit unnoticed while I got an idea of what shells and such are going for :P Give me a little bit of time to find out what this stuff is worth. Many apologies for not being better prepared.

Zip is 20121. Were are you? I can always take a trip on the weekend depending on what shipping might be. I know greyhound can be cheap for big oversized stuff.

I'm in Evansville, IN. It's probably quite a drive from Centerville. I've never shipped Greyhound. The easiest for me to ship is FedEx, but I believe it will also be more expensive. FedEx location is just down the road from work. UPS shipping is going to take me some time to get a quote in that the pickup/drop off warehouse isn't close and their hours of operation are identical to my work schedule. I'll have to change my work schedule around to get you that quote.

[JL1RX7]

Take your time. Just let me know. Thanks for looking for me.

[RotorDad]

Yeah my brother & I were just talking about maybe picking up another 7, so I figured I would ask. He wanted a vert, but I have tossed the idea of owning a vert around over the past month or so. All in all no rush really.

[Robzeroitz]

If you are interested in getting rid of the shell, I live in WI, lemme know price+shipping cost to 53150

[JustJeff]

If you are interested in getting rid of the shell, I live in WI, lemme know price+shipping cost to 53150

$1200 for the shell, but you have to arrange and pay for transport of the shell.

[JustJeff]

I'm going a different route with my alternator. It's got extremely low miles. I got it just before I detonated my engine and it's sat for some time. It's a reman'd and doesn't have more than a couple/few months of wear on it.

The pulley as more miles on it because I used it with a used FD alt that gave out on me.

Hell I'll even throw in a couple belts
$150+shipping
http://sphotos.xx.fbcdn.net/hphotos-snc7/s720x720/429170_3070764242451_1063965498_32728576_87879427_ n.jpg

http://sphotos.xx.fbcdn.net/hphotos-snc7/s720x720/429170_3070764242451_1063965498_32728576_87879427_ n.jpg

[Raksj04]

How much to have the FD alt shipped to 32212

[JustJeff]

Here is the second pic i meant to post...kinda doubled up
http://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc7/s720x720/395347_3070764802465_1063965498_32728577_705720699 _n.jpg

[JustJeff]

How much to have the FD alt shipped to 32212

I may not be able to get you a cost till Monday after work. Unless it will fit in a flat rate box from USPS. I'll bring one home from work tomorrow, if it fits I'll know. If not it will have to wait till Monday to find out.

[Raksj04]

K let me know

[JustJeff]

How much to have the FD alt shipped to 32212

It fits in flat rate box. I will cover shipping.

Paypal is reedjeffr@gmail.com.

[Raksj04]

sounds good.

[JustJeff]

Alternator sold!

Thanks Raksj04

[JustJeff]

Racing Beat exhaust sold!

[JustJeff]

Bump this.....

http://sphotos.xx.fbcdn.net/hphotos-prn1/542501_3807535261266_1467915478_n.jpg

http://sphotos.xx.fbcdn.net/hphotos-snc7/484176_3807535541273_2040967069_n.jpg

http://sphotos.xx.fbcdn.net/hphotos-ash3/600195_3807536101287_1840056817_n.jpg


Shell will come with a black bumper...I'll have pics soon
http://sphotos.xx.fbcdn.net/hphotos-snc6/283657_3807536341293_1316315862_n.jpg

Vert top will need replaced
http://sphotos.xx.fbcdn.net/hphotos-ash4/319882_3807536501297_1552619445_n.jpg

http://sphotos.xx.fbcdn.net/hphotos-snc7/599725_3807536621300_1286264115_n.jpg

http://sphotos.xx.fbcdn.net/hphotos-snc7/317993_3807536861306_1256275655_n.jpg

http://sphotos.xx.fbcdn.net/hphotos-snc7/380360_3807537021310_1178160746_n.jpg


Flaws on the passenger side of the car
http://sphotos.xx.fbcdn.net/hphotos-ash3/542442_3807538301342_253433925_n.jpg


Looks like a previous owner sprayed the side with brake fluid and didn't bother to clean it?
http://sphotos.xx.fbcdn.net/hphotos-ash3/556706_3807538501347_1536345748_n.jpg

http://sphotos.xx.fbcdn.net/hphotos-ash4/185097_3807538781354_596305428_n.jpg

http://sphotos.xx.fbcdn.net/hphotos-ash4/392500_3807538981359_846405268_n.jpg

Hopped a curb and got one dent
http://sphotos.xx.fbcdn.net/hphotos-snc6/285711_3807539261366_1116563944_n.jpg

[JustJeff]

Bumping. Buyer has backed out and the next buyer is having trouble coming up with funds. Toss me some offers