For those with IGN-1A's...

[infernosg]

I know there are a couple people running these in FC's. I'm trying to mount mine and run all the wires but I'm having difficulty coming up with a good location. I'm curious how everyone has their's mounted.

[infernosg]

So no one is running these coils on an FC? Also known as the Mercury Marine coils...

[djmtsu]

Isn't Brian running them (TTT)?

[C. Ludwig]

I know Bruce mounted them in the stock locations. Two where the leading coil was and two where the trailing were. I prefer to make a bracket to hold all four and hang them off the frame rail. Makes for shorter spark leads.

[infernosg]

Isn't Brian running them (TTT)?
I thought he did too but I couldn't find any pictures. I thought Tyler (vex) also had 'em but no luck there either.
I know Bruce mounted them in the stock locations. Two where the leading coil was and two where the trailing were.
This was my first thought but I didn't like the idea of the leads running parallel with so many other wires (like the CAS). Still would be the easiest...
I prefer to make a bracket to hold all four and hang them off the frame rail. Makes for shorter spark leads.
Something like down at the bottom of the driver's side strut tower in a line? I have to look when I get home as I thought the steering column was in the way.

My other problem is I have no means or ability to weld so my brackets are going to be simple to say the least.

[2gslse]

Brian isn't running them he only tested a set on the dyno for a few minutes but never were mounted.