rx4 12a auto and manual swap

[dr50376272]

ok, so i have a friend with a 12a single dizzy and 5 speed, and i have a twin dizzy and auto. 1973 rx4 coupe model.

i know engine, gearbox, master cylinder, pedal assembly, coil and ignitor, but anything else i need to swap over? exhaust is the same on 12a twin and single, auto/ manual? same exhaust? also i know propellor shaft is different so thats getting swapped too.

thanks

david

www.kagoshimaenglish.com/rx4.htm

[dr50376272]

no one knows?

[Kentetsu]

I don't. But there is a lot of documentation at www.iwankel.com that is related to the old school stuff. Billy and the guys will be able to tell you what's needed.

[fire85gslse]

ok, so i have a friend with a 12a single dizzy and 5 speed, and i have a twin dizzy and auto. 1973 rx4 coupe model.

i know engine, gearbox, master cylinder, pedal assembly, coil and ignitor, but anything else i need to swap over? exhaust is the same on 12a twin and single, auto/ manual? same exhaust? also i know propellor shaft is different so thats getting swapped too.

thanks

david

www.kagoshimaenglish.com/rx4.htm


12a twin dizzy exhaust mounting is different than newer 12a's

[rotarykev]

:willy_nilly:that is one cleannnnn!!!!! rx4 man good luck

[rotarykev]

that is one cleannnnn!!!!! rx4 man good luck:hurray:

[dr50376272]

did you look at my pictures?