View Full Version : Guess it's time for a build thread.
jerd_hambone
11-12-2010, 06:50 PM
Okay! Enough plaguing the lounge with my FC stuffs. Now I'll make a build thread.
Background: I bought these two FC's for a decent price. Guy said both had blown coolant seals, and one had a recent rebuild. Maroon car has OEM sport duckbill, Finishline fogs, (ones busted) aluminum hood, and an auto trans. Gold car is pretty basic. Both have rear seats and the optional high class radio with all the different options and 9 band EQ.
I got to work seeing how bad off the cars were, and preparing to buy a new motor. I check the gold car, won't crank. Put a socket on the main pulley, won't budge. Pull the spark plugs, rusty. Drain the oil, about a quart, the rest was orange water. Shit.
I check the maroon car. Spark plugs look slightly used. Check the oil, it's pretty clean. Try to crank the car, motor spins freely. Puts out three strong puffs for each rotor. Drain the oil, old oil and atf. Yes! Check the water neck, no thermostat. YES!
So I got to work, pulling the old, seized 13B out of the gold car. Everythings moving along fine, til I crawl underneath. Trans drain plug and fill plug, both, are gone. Slave cylinder is frozen. Shit!
Oh well. Next step: Remove the good motor out of the maroon car and diagnose all my problems.
Pics up shortly.
jerd_hambone
11-12-2010, 07:12 PM
http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs569.ash2/149168_10150307081245444_599870443_15782246_656689 4_n.jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs157.snc4/37202_10150307395130444_599870443_15784784_514307_ n.jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs1149.snc4/149103_10150305172485444_599870443_15762365_559687 2_n.jpg
jerd_hambone
11-12-2010, 09:22 PM
The locked up motor ready to be pulled. 180k original miles.
http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs056.ash2/36175_10150308432475444_599870443_15797143_5019229 _n.jpg
project86
11-12-2010, 09:31 PM
win for you
jerd_hambone
11-12-2010, 09:44 PM
Haha. I'm busting my ass off. If I would have worked a little harder this engine would be out. It's literally just sitting in there now.
Tomorrow I'll get the other motor ready to pull, and maybe get the junk one out. I have to use a chain hoist on a tree limb because I have no garage or smooth surface to put a cherrypicker on.
jerd_hambone
11-18-2010, 11:18 PM
Sad news....
I haven't been able to work on the cars due to horrid weather. But when I drained the oil out of the cars, both have floor rot. Gold car has very little. A line about the size of a pencil, length and width, on the driver floorboard. Red car is useless. Front frame rails rusted in half, seat brackets rusted off, horrible. It's basically nothing but a parts car, and I'd never sell it as anything but. Luckily it still has a ton of good parts.
NoDOHC
11-19-2010, 07:29 PM
Rust is a killer, it usually is the means that claims my cars. I have no patience for body work, so once rusty, always rusty (until complete death by rust separates us).
POR 15 that rust right away, it might last a while yet.
jerd_hambone
11-20-2010, 12:55 PM
I'm definitely taking care of the rust on the gold one.
The poor maroon car is a goner.
TehMonkay
11-20-2010, 01:30 PM
thats a rare color purplish car
jerd_hambone
11-20-2010, 03:42 PM
Yeah, I've not seen many of them. I want to fix it up, but with the frame rail being rusted COMPLETELY out, I'm not sure it's even worth it.
Whats your guys opinion on that?
TehMonkay
11-21-2010, 03:53 PM
scrap it, rockers, floors, quarters, all repairable if you have the skill or time or patience etc, but that is just not worth it.
jerd_hambone
11-21-2010, 04:53 PM
Really aside for the floor, drivers door, and frame rail, the rest of the car is pretty clean. Not a lot of dents or dings, no other rust, no shady bodywork.
jerd_hambone
11-25-2010, 11:52 AM
I'm really debating parting the maroon car out to fund the build on the gold one.
I just DREAD shipping parts. Absolutely dread it.
Nismo
11-26-2010, 12:50 AM
If you had sex for parts, you wouldn't dread it as much man!
jerd_hambone
11-26-2010, 01:34 AM
I'm pretty sure I can pull that off for cheaper parts.
Some good, and some bad news though.
The old man tossed the radiator from the gold car onto my good interior pieces. Busted a mint radio surround, center vent, defog vents, and demister vents.
Good news, I had a spare S5 seat, in mint shape, thought it was a passenger side. My driver seat has some sort of rigged mount and is bolted straight to the floor. I decided to put the seat in my car, and surprise! Its a mint driver side S5 black seat.
I've sourced a mint passenger seat, and radio surround and won't be breaking the bank.
Also the maroon car has an aluminum undertray. Thought that was nifty.
jerd_hambone
05-03-2011, 09:37 PM
Been a while, had some changes in my plans, and my life, and all such stuff.
But now, both cars are going to be mostly parted out. Gold will be left with full body, brakes, suspension, and rearend. Not much else. Claret Mica will be parted out and sold as a roller, or scrapped, depending on if someone wants to do the repairs to make it road safe.
Gold car is getting a Chevy 350 and T5 combo. Don't hate.
project86
05-04-2011, 12:08 AM
whats wrong with the other one? why isnt it road safe?
jerd_hambone
05-04-2011, 12:26 AM
Floor is almost rusted out, front frame rails are rusted OFF the car. Needs a new door. Needs new quarters. If the paint were stripped, I'd be terrified to see what else needs replaced.
project86
05-04-2011, 06:49 AM
does it run? shoot me a text. ill be at work.
jerd_hambone
05-05-2011, 07:49 PM
Tore a lot of the claret mica car apart today, found that it has had an engine bay fire and the driver side harness is toasted.
jerd_hambone
05-29-2011, 02:30 AM
Engine and trans out of the gold car, mostly everything out of the bay. If I can get a break from storms and rain and family, I'll finish stripping the bay, cleaning, and painting.
I keep tossing up the decision between an auto and manual trans. If I got manual, I'll have to source out a trans, flywheel, shifter, and all that good stuff.
Where as I have a full auto. If I go the auto route, it will be a 700R4 with a full manual valve body, and a slight stall.
The engine won't be built up much. Just a bit more aggressive cam, a set of aluminum heads, flat top pistons, dual plane manifold, and Holley 750 carb.
85rx-7gsl-se
05-29-2011, 08:27 AM
I just noticed you live in Corbin, KY. How long have you lived there? My grandmother lives in Corbin lol.
jerd_hambone
05-29-2011, 01:00 PM
Most of my life haha! I actually live in Keavy, which is right beside Corbin. Heading north, I live 4 miles off the 2nd Corbin exit on 75.
What's her name and where abouts does she live here?!
85rx-7gsl-se
05-29-2011, 02:22 PM
Her name is elene terrell. Lives down on 6th iirc. Its a few blocks off of main headed back towards 75.
jerd_hambone
05-29-2011, 04:33 PM
I know where that is, not far from my house at all. You ever visit these parts?
85rx-7gsl-se
05-29-2011, 11:09 PM
Sometimes on holidays. I will have to hit you up next time I visit.
jerd_hambone
05-29-2011, 11:22 PM
Do it haha. 6th street is literally about 4 miles away from my house.
vBulletin® v3.8.4, Copyright ©2000-2025, Jelsoft Enterprises Ltd.