PDA

View Full Version : 88 rx7 turbo PART OUT w/ rebuilt mazda engine + goodies


Fidelity101
08-15-2010, 06:46 PM
http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs135.ash2/40073_636465082111_40004644_35873613_4166102_n.jpg

Located in the west suburbs of Chicago.

I'm keeping the drivetrain and brakes/wheels assembly since I have 4 lug NA stuff on my car.

it has 88k on the chassis unfortunately

gray 2 seater interior (I'm keeping the seats) with power windows

the engine has been rebuilt by mazda and I have paperwork backing it up, there is roughly 44k on the rebuild and has GREAT compression, it also has poly engine mounts that are included. I'm unsure if I want to keep this and half bridge it for myself so if I get rid of this I'm looking for 750 with the engine mounts. I haven't figured out shipping but I'd rather sell it locally if I do.

http://img64.imageshack.us/img64/7325/20100815162150.jpg (http://img64.imageshack.us/i/20100815162150.jpg/)

comes with alternator (with no pulley) water pump and water pump housing, this engine may also have an oil pan brace the bolts have been replaced with better hardware and does not leak or just has nice gaskets and new hardware with washers. either way great shape.



http://img217.imageshack.us/img217/4434/20100815140349.jpg (http://img217.imageshack.us/i/20100815140349.jpg/)
Red T2 hood, small dent by the driver side area by where it mounts to the chassis.

100 picked up

http://img641.imageshack.us/img641/3821/20100815151815.jpg (http://img641.imageshack.us/i/20100815151815.jpg/)

pic of the engine/front subframe assembly. This engine has been changed to run premix. the OMP is blocked off and there are NPT plugs in the rotor housings.
apex seals move and provide a great seal and have poly engine mounts

passenger side door assembly, power windows
http://img186.imageshack.us/img186/6268/20100815161627.jpg
http://img827.imageshack.us/img827/4329/20100815161658.jpg

250 obo picked up, only a small ding on the door, great paint otherwise again. Interior trim is immaculate and the power window switch is in great condition. Comes with everything you see.

http://img835.imageshack.us/img835/7631/20100815161728.jpg (http://img835.imageshack.us/i/20100815161728.jpg/)

ECU protective guard, 5 dollars +shipping
double gauge pod 10 dollars + shipping
S4 master window switch, great switch action (feels sturdy, almost new) 35 + shipping
t2 radio 5+ shipping
S4 t2 engine EFI harness in GREAT shape. no corroded wires or oily film 75 + shipping

http://img821.imageshack.us/img821/6411/20100815161802.jpg (http://img821.imageshack.us/i/20100815161802.jpg/)

stock TMIC - 35
stock wastegauge actuator - 10
stock intake turbo piping and OEM airbox with K&N drop in filter - 25
stock BOV (I assume?) - 10

if you want them all I'll do 60 + shipping


http://img15.imageshack.us/img15/7315/20100815161809.jpg (http://img15.imageshack.us/i/20100815161809.jpg/)

"stock" turbo downpipe with cat, it looks like it has been cut after the back of the cat and a straight pipe all the way down. no flange on the otherside - 40 bucks
air conditioning condenser with lines - 15
fan shroud - 10

http://img411.imageshack.us/img411/8350/20100815162222.jpg (http://img411.imageshack.us/i/20100815162222.jpg/)

3" ebay ss autochrome brand turbo downpipe and pre silencer with hardware - 100 (i'd like to sell them together, will consider separating to help out a fellow 7 owner)

http://img37.imageshack.us/img37/5928/20100815161823.jpg (http://img37.imageshack.us/i/20100815161823.jpg/)

rear bumper with molding - 50
s4 tail lights 50
working hatch shocks, in great shape. when you pop the trunk they raise the hatch to that level nearly by themselves!

20 dollars each, 35 for both

rear hatch glass with wiper motor and any other rear wiper components - 100

http://img530.imageshack.us/img530/2610/20100815163047.jpg (http://img530.imageshack.us/i/20100815163047.jpg/)

manual steering rack 100 (with outer tie rod ends, 125) one of the boots has a small hole in it which will likely need to be replaced, the boots go for cheap at the local parts store

http://img696.imageshack.us/img696/7396/20100815162304.jpg (http://img696.imageshack.us/i/20100815162304.jpg/)

coils are 35 dollars each
clutch master cylinder and pedal assembly is 50
brake booster and pedal assembly 30
anything else in the photo that may interest you, LMK
headlight assemblies 40 for each 70 for both motors, lights, covers. everything.

gray interior is in GREAT shape, rear bins, let me know what pieces you may need to replace your faded or broken ones
http://img686.imageshack.us/img686/5543/20100815161840.jpg (http://img686.imageshack.us/i/20100815161840.jpg/)
http://img46.imageshack.us/img46/6434/20100815161816.jpg (http://img46.imageshack.us/i/20100815161816.jpg/)

Uploaded with ImageShack.us (http://imageshack.us)
passenger fender is in great shape as well as the front bumper with lip,
75 for each (pics to come soon) come with molding, front bumper does not have the passenger faux light

I also have an S4 NA rotating assembly with good s4 NA housings that are re useable, and I will be putting in turbo 2 exhaust inserts in them and possibly a streetport. The housings will be cleaned and ready for either paint or install since they will be sand blasted, I can either do the painting for you or send these to a friend of mine to get powder coated, depending what you want to do will affect the price. all you need are irons for your appropriate application and you got yourself a gnarly NA motor! PM me for details

my email is fidelity101@gmail.com please email me for a faster response and let me know what you are looking for.

if any of your friends have an RX and are looking for something, send them my way. thanks.

prices do not include shipping, large items are pick up only, maybe deliver or meet up halfway but speak with me we and we can work something out first.

djmtsu
08-15-2010, 07:34 PM
Damn! WTF happened to that TII?

Sux that it died so young, but at least it is giving up its organs to keep other FC's alive!!

Fidelity101
08-15-2010, 07:36 PM
wet road, too much power the kid put it sideways into a tree.

it was also a straight road with a 30mph speedlimit

luckily he only broke his femur, hes okay and walking around no problem now

haha yeah I recycle rotaries normally but thats just the engines, but this is a whole nother level!

I'm excited to beat the snot out of my 4 lug drivetrain and brakes and wheels and see if I can blow them up rallying this fall before winter time when I install the turbo parts so its ready for ice racing :D

Silver86
08-15-2010, 08:01 PM
ack... i could use a bunch of things off that car... but ive already spent too much else where atm.

sk8world
08-15-2010, 11:35 PM
not sure if what I need is good still from the pics but I could use the trim around the radio-ac (outer trim) also the trim around the clock, triangle plastic pieces in doors, also have a issue with the drivers side door lock. Wont open but I have taken it apart and not sure whats broke yet there.

Fidelity101
08-15-2010, 11:38 PM
all of those are busted but I will check the lock, it was hit on the other end of the door.

My5ABaby
08-16-2010, 09:35 AM
Driving fail.

Free bump

Boosted FC
08-16-2010, 09:47 AM
I'll take the gauge pod if it is available. Shipping will be to a business address, Zip 30341. Is the driver's Apillar trim any good? Thanks.

-Sheldon.

Fidelity101
08-16-2010, 09:58 AM
I'll take the gauge pod if it is available. Shipping will be to a business address, Zip 30341. Is the driver's Apillar trim any good? Thanks.

-Sheldon.

completely smashed, sorry.
yet somehow the pod is untouched?
my paypal is fidelity101@gmail.com

10 bucks for shipping to your zip.

Boosted FC
08-16-2010, 10:01 AM
completely smashed, sorry.
yet somehow the pod is untouched?
my paypal is fidelity101@gmail.com

10 bucks for shipping to your zip.

Thanks for the quick reply. Sorry to hear about his injury. Payment for the pod coming your way. Thanks.

-Sheldon.

Fidelity101
08-16-2010, 10:14 AM
I'm bored at work, I'll be here all day! haha

Fidelity101
08-18-2010, 01:23 AM
TMIC
hood
engine
harness
bov
engine mounts
stock DP w/ cat
gauge pod

are SOLD!

http://img443.imageshack.us/img443/1752/fenderlamp.jpg
red passenger fender in great shape, 75
headlamp assemblies with motors and relay are 60 a piece 100 for both

http://img714.imageshack.us/img714/3448/frontbumper.jpg

I also have this blown subwoofer amp combo, the subs in it are fine, but the amp is blown so you can just bypass this one and wire it with another amplifier, these twin infinity 10" subs sounds great! and its compact. these retail new for about 300, at the most would cost 100 to repair, probably around 30-50 but if you can do it yourself cheaper go for it.

infinity basslink II - 35
http://img72.imageshack.us/img72/5150/amp1r.jpg
http://img195.imageshack.us/img195/7315/amp2p.jpg

i;ll have the pod mailed out within a day or two tops.

Ptotherice
08-21-2010, 07:14 PM
What's up, Fidelity. What happened to the Rex?

Fidelity101
08-23-2010, 02:30 AM
What's up, Fidelity. What happened to the Rex?

hey!

some guy put it sideways in the rain into a tree.

rack sold
radio sold
exhaust sold

gauge pod is shipped! (8/23/2010)

ps sorry, been stupid busy but its boxed and ready to go!

Boosted FC
08-25-2010, 08:35 AM
Gauge pod received. Great packaging & great service. + Repped

-Sheldon.

Fidelity101
08-25-2010, 12:20 PM
yeah sorry it took so long, there was a lot of work and shipping that needed to be done haha

shell is gone!
http://img829.imageshack.us/img829/2249/gone.jpg (http://img829.imageshack.us/i/gone.jpg/)


headlamp assemblies w 1 motor available 25 dollars each.

rear hatch with wiper (no shocks) 55 picked up.

http://img829.imageshack.us/img829/4817/windowq.jpg (http://img829.imageshack.us/i/windowq.jpg/)


red T2 seats in avg shape, kinda crappy - 35 picked up for both (otherwise they are gonna become office seats
http://img163.imageshack.us/img163/1116/seats.jpg (http://img163.imageshack.us/i/seats.jpg/)

AWESOME condition S4 power window switches master and passenger side for 55 dollars combined, 25for passenger side + shipping or 45 + shipping for master switch
http://img831.imageshack.us/img831/8043/switches.jpg (http://img831.imageshack.us/i/switches.jpg/)

Passenger fender is 50 picked up
bumpers are 35 picked up each or 60 for both

I also have multiple ignition coils, leading and trailing laying around. 25+ shipping for each.

passenger door with handle, s4 aero mirror, window, regulator, door panel 60 picked up.

looking for high amp alternator, or somewhere to get mine re wrapped

infernosg
08-25-2010, 06:36 PM
Were the S4's also blaze red or was it a slightly different color? Do you have the entire driver's side headlight assembly (light, frame, rods, cap, trim, etc.)? Which motor do you still have (or does it matter)?

Fidelity101
08-25-2010, 06:42 PM
It has the cap evyerthing and trim with everything. Just bolt it up. I have the driver side motor left over. I can't tell s4 vs s5 red apart but the paint is in awesome shape

tuscanidream
10-04-2010, 03:39 PM
Hello!

I am in need of the alternator/battery wiring harness for my 87 tii. Also wondering if you have the main car or engine harness? The previous owner of my car hacked the harness a bit and the car isn't running correctly.

I am also in need of an alternator and MAF.

Please let me know if you still have any of these parts available.

Thanks!

I'll also send a pm as well. I understand that this thread is a month old.

Fidelity101
10-04-2010, 04:09 PM
car is gone and all of those parts are gone but I do have an S4 NA alt if you need one.

I just have spare body parts which I may keep

tuscanidream
10-04-2010, 04:26 PM
car is gone and all of those parts are gone but I do have an S4 NA alt if you need one.

I just have spare body parts which I may keep

Thanks anyways. I have a turbo, so I don't know if the alternator would work. I can just get a rebuilt one and use my broken original one as a core. Must be a common issue if 2 went so far with 76000mi.

Keep your eyes peeled for me, will ya?

Thanks again.