GB: Rotary-Works 90mm CNC Cut Billet Aluminum Throttle Body

[Herblenny]

I just got off the phone with owner of Rotary-Works.com

Here is the GB pricing..

For any of their CNC Cut Billet Aluminum Throttle Body (for FC, FD, or 20B) he has given me the following pricing..

10-19 sets

$325 for regular billet aluminum (non-anodized) TB
$350 for Black anodized billet TB

20+ sets

$300 for regular billet aluminum (non-anodized) TB
$325 for Black anodized billet TB

This does not including shipping.

Here are pics of the TB

For FC's
http://www.rotary-works.com/mm5/graphics/00000001/RW-TB-RX7-FC-b.jpg

For FD's
http://www.rotary-works.com/mm5/graphics/00000001/TB-RX7-FD-2-b.jpg

For 20B (pretty much same as FD)
http://www.rotary-works.com/mm5/graphics/00000001/TB-RX7-FD-2-b.jpg

Black anodized
http://www.rotary-works.com/products/Throttle%20Body/RW-TB-RX7-FD-BLACK/TB-RX7-FD-BLACK-1.jpg

And for more detail info: http://www.rotary-works.com/mm5/merchant.mvc?Screen=CTGY&Store_Code=rotaryworks&Category_Code=THBD


Lets start a list and post here what type of TB you would like..

Once we hit list of 10, we'll decide if we'll wait to see if we could hit 20+ before I tell him about how he would like to go about ordering.


LIST for 90mm TB (When time to order, order of the list is how it will be shipped... Also GB will end if we hit 20.)

1. Herblenny - 20B TB and maybe 13B REW TB (pending how soon I get my 20B kit).

[Proxy One]

1. Herblenny - 20B TB and maybe 13B REW TB (pending how soon I get my 20B kit).
2. Proxy One - FD Regular billet aluminum

[20b 3rd gen]

1. Herblenny - 20B TB and maybe 13B REW TB (pending how soon I get my 20B kit).
2. Proxy One - FD Regular billet aluminum
3. 20b 3rd gen - 20B billet aluminum

[Herblenny]

1. Herblenny - 20B TB and maybe 13B REW TB (pending how soon I get my 20B kit).
2. Proxy One - FD Regular billet aluminum
3. 20b 3rd gen - 20B billet aluminum
4. Rob - REW regular Billet Aluminum

[PortedRotorTuner]

1. Herblenny - 20B TB and maybe 13B REW TB (pending how soon I get my 20B kit).
2. Proxy One - FD Regular billet aluminum
3. 20b 3rd gen - 20B billet aluminum
4. Rob - REW regular Billet Aluminum
5. PortedRotorTuner - FD Billet Aluminum

[allrotor93]

1. Herblenny - 20B TB and maybe 13B REW TB (pending how soon I get my 20B kit).
2. Proxy One - FD Regular billet aluminum
3. 20b 3rd gen - 20B billet aluminum
4. Rob - REW regular Billet Aluminum
5. PortedRotorTuner - FD Billet Aluminum
6. Allrotor93 - 20B BA

[allrotor93]

Can you spam the other forum? I am sure we can get 4 more

[KaiFD3S]

Guess I made a mistake on selling mine, so I'll join in to get another one..LOL...I knew I would end up buying again..


1. Herblenny - 20B TB and maybe 13B REW TB (pending how soon I get my 20B kit).
2. Proxy One - FD Regular billet aluminum
3. 20b 3rd gen - 20B billet aluminum
4. Rob - REW regular Billet Aluminum
5. PortedRotorTuner - FD Billet Aluminum
6. Allrotor93 - 20B BA
7. KaiFD3S - FD regular Billet Aluminum

[93vrfd_houston]

hell put me down for one......

1. Herblenny - 20B TB and maybe 13B REW TB (pending how soon I get my 20B kit).
2. Proxy One - FD Regular billet aluminum
3. 20b 3rd gen - 20B billet aluminum
4. Rob - REW regular Billet Aluminum
5. PortedRotorTuner - FD Billet Aluminum
6. Allrotor93 - 20B BA
7. KaiFD3S - FD regular Billet Aluminum
8. 93vrfd_houston - fd billet aluminum

[thecrowe]

fd billet for me

[KaiFD3S]

1. Herblenny - 20B TB and maybe 13B REW TB (pending how soon I get my 20B kit).
2. Proxy One - FD Regular billet aluminum
3. 20b 3rd gen - 20B billet aluminum
4. Rob - REW regular Billet Aluminum
5. PortedRotorTuner - FD Billet Aluminum
6. Allrotor93 - 20B BA
7. KaiFD3S - FD Regular Billet Aluminum
8. 93vrfd_houston - fd billet aluminum
9. thecrowe - FD Regular Billet Aluminum

[Herblenny]

Can you spam the other forum? I am sure we can get 4 more

I personally don't want to do it as they might think I'm trying to make money.. which I'm not. But I'm sure someone else could mention it ;)

Guess I made a mistake on selling mine, so I'll join in to get another one..LOL...I knew I would end up buying again..


LOL! If we hit 20, Im getting another one for the 20B.

Once we hit 10, I'll ask them about how they want to handle the situation. Maybe have some sort of time line in place so those of us wanting the TB soon will go ahead and order and get the difference later? I don't know.. Or just have a deadline and order.

I'll let you guys know once we hit 10... which we need one more person!

Phil

[allrotor93]

I put in some shameless plugs but I am sure they will get deleted

[MotoTek]

I'll be your Huckleberry. haha

1. Herblenny - 20B TB and maybe 13B REW TB (pending how soon I get my 20B kit).
2. Proxy One - FD Regular billet aluminum
3. 20b 3rd gen - 20B billet aluminum
4. Rob - REW regular Billet Aluminum
5. PortedRotorTuner - FD Billet Aluminum
6. Allrotor93 - 20B BA
7. KaiFD3S - FD Regular Billet Aluminum
8. 93vrfd_houston - fd billet aluminum
9. thecrowe - FD Regular Billet Aluminum
10. MotoTek - FD Billet Aluminum

[jamespond24]

1. Herblenny - 20B TB and maybe 13B REW TB (pending how soon I get my 20B kit).
2. Proxy One - FD Regular billet aluminum
3. 20b 3rd gen - 20B billet aluminum
4. Rob - REW regular Billet Aluminum
5. PortedRotorTuner - FD Billet Aluminum
6. Allrotor93 - 20B BA
7. KaiFD3S - FD Regular Billet Aluminum
8. 93vrfd_houston - fd billet aluminum
9. thecrowe - FD Regular Billet Aluminum
10. MotoTek - FD Billet Aluminum
11. jamespond24-20B Billet aluminum

[allrotor93]

I recruited a few more from the other side...give it a week or so and see if we hit 20.

Maybe we can talk them into giving us the 20 discount anyways since we are basically the test subjects

[MotoTek]

Can we get these without their logo on it?

Kai didn't you buy one of these, and sell it already? lol

[jamespond24]

Can we get these without their logo on it?

Kai didn't you buy one of these, and sell it already? lol


He sold it to me and I give it to my friend so he can test it out. My friend ran 8.81 153mph 1/4miles with a stock FD TB, going to find out if the time or trap speed changes with this 90mm TB.

[jamespond24]

My friend told me the 90mm TB has a deeper tone than the stock ones.

[neit_jnf]

1. Herblenny - 20B TB and maybe 13B REW TB (pending how soon I get my 20B kit).
2. Proxy One - FD Regular billet aluminum
3. 20b 3rd gen - 20B billet aluminum
4. Rob - REW regular Billet Aluminum
5. PortedRotorTuner - FD Billet Aluminum
6. Allrotor93 - 20B BA
7. KaiFD3S - FD Regular Billet Aluminum
8. 93vrfd_houston - fd billet aluminum
9. thecrowe - FD Regular Billet Aluminum
10. MotoTek - FD Billet Aluminum
11. jamespond24-20B Billet aluminum
12. neit_jnf - FD regular with CC if available

[Herblenny]

OK. I'm going to contact RW and see how they want to handle this..

[KaiFD3S]

Can we get these without their logo on it?

Kai didn't you buy one of these, and sell it already? lol

Haha, yeah impulse buy and impulse sell now it is a serious buy....LOL..:driving::banghead:

[Herblenny]

Got in contact with RW. They are going to figure out how to handle this.. I'll keep you guys updated... hopefully by sometime next week.

[Herblenny]

Hey guys, I been away because my kid had to be admitted to the hospital for the past 4 days. Anyhow, I have talked to the RW and they asked me to get your emails as a confirmation/verification.

So, Please PM me with your full name, SN, email. Once I have 10 of you, I'll pass it on to RW and they will give me a code and number for you to call or email to place an order.

PHIL

[TitaniumTT]

Hey Phil,

Sorry to here about your little one. I hope everything is ok

What are the bene's of this TB over a standard one? Throttle response? Higher top end? Bling factor? I'd be willing to put my name in if there are known bene's. Maybe he can cut me a break if I make a few dyno tests for him ;)

[EJayCe996]

Hell, glad I caught this......
1. Herblenny - 20B TB and maybe 13B REW TB (pending how soon I get my 20B kit).
2. Proxy One - FD Regular billet aluminum
3. 20b 3rd gen - 20B billet aluminum
4. Rob - REW regular Billet Aluminum
5. PortedRotorTuner - FD Billet Aluminum
6. Allrotor93 - 20B BA
7. KaiFD3S - FD Regular Billet Aluminum
8. 93vrfd_houston - fd billet aluminum
9. thecrowe - FD Regular Billet Aluminum
10. MotoTek - FD Billet Aluminum
11. jamespond24-20B Billet aluminum
12. neit_jnf - FD regular with CC if available
13. EJayCe996 - FC regular billet aluminum

[EJayCe996]

Oh, and for any other FC owners interested, ours are 80mm according to the site.

Not that I'm complaining if I end up being the only FCer on this since the majority are flakes anyway :rofl:

[jamespond24]

Oh, and for any other FC owners interested, ours are 80mm according to the site.

Not that I'm complaining if I end up being the only FCer on this since the majority are flakes anyway :rofl:

I'm an FC owner also I order the TB for my FC 20B :D

[Herblenny]

OK guys.. You need to PM me with your info!!

Please PM me with your full name, SN, email. Once I have 10 of you, I'll pass it on to RW and they will give me a code and number for you to call or email to place an order.

As of now, I have 7 people who has PM'd me or emailed me with their info.. We need 3 more to complete the 10 required!

[Herblenny]

Now I have 8 people who have sent me their info..

2 more and I'm sending in the list so you guys can start ordering.

Code is specific to you and the order on the list plus who PM me with the info... If you don't PM me before 10 is reached, you will loose your spot even though you put your name on the list... So, PM ME ASAP!!!

[KaiFD3S]

PM Sent

[Herblenny]

Awesome!

We now have 10 signed up!!

I will however wait til 9AM CST tomorrow to submit the list to Rotary Works. After the 9AM, I will send you an email with contact info to Rotary Works and specific Confirmation email and code to be used to order your TB.

Phil

[jamespond24]

Hey wait I pm you last week with my info and I haven't got an email from you. What's going on?

[allrotor93]

He will email us after he talks to RW

Hey wait I pm you last week with my info and I haven't got an email from you. What's going on?

[Herblenny]

Email has been sent to RW with the list.

once I get a reply back, I will email you all with details.

Phil

[jamespond24]

He will email us after he talks to RW

Ohh sorry I thought the email is for confirmation of purchasing.

Thanks

[KaiFD3S]

Got my email and just got off the phone to place my order...Cat wait...LOL...Second time ...haha

[the_glassman]

Can I still get in on this?

[Herblenny]

Can I still get in on this?

Wait a week or so.. Until everyone places in their order (or by next monday).

I'll see how many have actually ordered and if its under 10.. I'll post here.

Phil

[TitaniumTT]

They need a 13B-RE solution damnit

[Herblenny]

They need a 13B-RE solution damnit

20B TB will work with 13B-RE UIM. I measured all this before...

[TitaniumTT]

aannnnd point and laugh.

I will stab you :rofl:

20B TB will work with 13B-RE UIM. I measured all this before...

Oh really? What about the BAC? Is it in the same location on both the 13 and the 20B? That's my main concern and knowing that the BAC is not on the TB of the FD or the FC, I assumed that it wasn't on the 20B either. I'm going to need to call them today, thanks Phil!

[rotomoto]

Is it too late to get in on this GB?

If not, I would like one for an FD, but with the optional cruise control fixture.

Thanks

[Herblenny]

I've deleted unrelated posts to this GB.. Please restrain yourself from posting random chat..

Regarding if its too late to get on this GB..

Friday is the deadline for people on the 1st list to place their order. If less than 10 people have actually bought their TB, then GB will open back up. I'll give another week for the people on the 1st list to purchase... after Next Friday (May 28th), their names will be taken off and the CANNOT get back on the GB and would have to pay... just because you put your name on here doesn't mean you get to keep your spot indefinitely!!

I've emailed Rotary Work to see who ordered theirs and who didn't.. Pending how things go, I'll ask them if they will allow few more and also how they want to handle things if we do get 20+ people.

[allrotor93]

paid for mine today

[PortedRotorTuner]

I was going to pay for mine tomorrow. Just so you know. :001_005:

[allrotor93]

He said he was shipping them in the next day or 2

[KaiFD3S]

Got mine today, looks just as good as the first one I bought...

[TitaniumTT]

:rofl: I still need to find the time to call and talk to these guys about the BAC on the 20B TB. I want one.... really badly. I need more excuses to stap my girl on the dyno

[allrotor93]

i bought another one today so put that toward the 20

[the_glassman]

Ready to pay for one if someone drops out or they can cut me in. :)

[goracer]

:seeya: I was going to buy one anyway and found the GB trying to google RW since I forgot their name. I need the added cruise control option though.

[goracer]

I just spoke with them asking if I can jump in on the tail end of this but I didn't realized they have not made the cruise control option yet. If anyone else needs the cruise control, please speak up as they may need to machine an entire new manifold and most likely they may need preorders to justify the expense as the version they have now was purpose built for track only cars (no cruise needed).

[allrotor93]

these cars have cruise?

[goracer]

^ I like my touring version. I won't give up my stereo, A/C, power steering or cruise control.

I believe there's more dual purpose (daily driver/weekend race) then there are track only guys. Especially since he said he's already had a lot of calls for the cruise option and they may have to create a separate version instead of just an add on.

[neit_jnf]

waiting for cruise control also!!!

[93vrfd_houston]

Regarding if its too late to get on this GB..

Friday is the deadline for people on the 1st list to place their order. If less than 10 people have actually bought their TB, then GB will open back up. I'll give another week for the people on the 1st list to purchase... after Next Friday (May 28th), their names will be taken off and the CANNOT get back on the GB and would have to pay... just because you put your name on here doesn't mean you get to keep your spot indefinitely!!

I've emailed Rotary Work to see who ordered theirs and who didn't.. Pending how things go, I'll ask them if they will allow few more and also how they want to handle things if we do get 20+ people.



hey Phil, i sent Rene two emails and requested if i could make a purchase via another way besides a phone call. i still want this part badly and i am willing to pay for it now but i have not heard back from Rene. since i am overseas it is hard for me to contact him on his time schedule via phone call. i will send him another email today but i would hate to not be able to get back on the gb if i'm bumped off for this reason.

[goracer]

If they are going to make a whole new street version, then hopefully then can dual plates which helps prevent bogging from putting around (like parking lots, gas stations, etc). Not double throttle but on OEM the bottom single plate is separate from the top dual plates. Yes, I know the original purpose is for racing but if they are starting a new one from scratch then it would be a sweet version. The coolant connection and double throttle we don't need.

[Herblenny]

I'll ask Rene about email orders.. I think he told me that he will give me a code to give you guys for ordering online.. I'll double check on that.

regarding cruise.. Last time I talked to him, he said they are working on it.. Not sure how long.

Mine is on the car but have some other issues.

But this is how it looks :)

http://i37.photobucket.com/albums/e79/herblenny/MBFD1-1.jpg

[93vrfd_houston]

hey Phil, please disregard my previous post. i found one to purchase.

thanks, Mark

[RICE RACING]

They look real nice :icon_tup:

I made a similar thing out of the stock unit and in reality on the street in my own experience they work crap :icon_tdown:

Problem is most of the air speed is lost down the secondary runners in the lower inlet manifold, and cause you are running primary injectors at low speed low throttle the fuel mixing is rubbish :o10: everything suffers and its a basic mismatched concept that can never have the bugs tuned out as its a mechanical air flow and speed problem.

Once you are up and driving they are great :driving: I went back to a standard offset slightly staged primary to secondary butterfly system and all problems went away. A single large throttle or locked std triple butterfly especially one that interlinks primary and secondary lower runners will never be right......... not a warning against the group buy but worth knowing if your not aware of the issues of this type of thing and expect your car to be perfect in the way it runs.

[jamespond24]

Well it works great on my friend's drag car! I'm going to use one of the it on my street 20B FC. I'm excited!!!

[goracer]

They look real nice :icon_tup:

I made a similar thing out of the stock unit and in reality on the street in my own experience they work crap :icon_tdown:

Problem is most of the air speed is lost down the secondary runners in the lower inlet manifold, and cause you are running primary injectors at low speed low throttle the fuel mixing is rubbish :o10: everything suffers and its a basic mismatched concept that can never have the bugs tuned out as its a mechanical air flow and speed problem.

Once you are up and driving they are great :driving: I went back to a standard offset slightly staged primary to secondary butterfly system and all problems went away. A single large throttle or locked std triple butterfly especially one that interlinks primary and secondary lower runners will never be right......... not a warning against the group buy but worth knowing if your not aware of the issues of this type of thing and expect your car to be perfect in the way it runs.

That's why I asking if they would do a double plate if they had to design a new streeet version to include cruise control anyhow. My CBR 1000 has a similar double butterfly. The main throttle is closed at low speeds and only the little plates open giving about 20% of air volume. Above a certain rpm the main plates open up as well. I removed the little flap doors and deviders to enlarge the intake. For the most part when I had it tuned, they compensated for it. I'm not sure if it would be the same for this setup or not. Maybe it could be tuned and smoothed out with the PFC?

[AzEKnightz]

can we still jump on this gb?

-AzEKnightz

[thewird]

Can I get a black anodized one?

thewird

[scrubolio]

any reviews on this TB? is the pricing still available?

[AzEKnightz]

any updates?

[allrotor93]

I have a new one that i bought for my 20B...they are the same throttle body. $325 shipped

[jamespond24]

[QUOTE=scrubolio;128762]any reviews on this TB?


Well my friend Poncho made 992rwhp at 47psi using this TB with a stock FD intake manifold running a semi-port.

[jamespond24]

My 20b FC make 715rwhp at 25 psi with the Rotary Works tb, planning on hitting 800rwhp next weekend than race at an import event on the following Sunday.

[Supernaut]

Anyone experiencing leaks due to the TB?